Untangling the formation of the cyclic carbon trioxide isomer in low temperature carbon dioxide ices

Literature Information

Publication Date 2004-01-23
DOI 10.1039/B315626P
Impact Factor 3.676
Authors

Chris J. Bennett, C. Jamieson, Alexander M. Mebel


View Original

Abstract

The formation of the cyclic carbon trioxide isomer, CO3(X 1A1), in carbon-dioxide-rich extraterrestrial ices and in the atmospheres of Earth and Mars were investigated experimentally and theoretically. Carbon dioxide ices were deposited at 10 K onto a silver (111) single crystal and irradiated with 5 keV electrons. Upon completion of the electron bombardment, the samples were kept at 10 K and were then annealed to 293 K to release the reactants and newly formed molecules into the gas phase. The experiment was monitored via a Fourier transform infrared spectrometer in absorption-reflection-absorption (solid state) and through a quadruple mass spectrometer (gas phase) on-line and in situ. Our investigations indicate that the interaction of an electron with a carbon dioxide molecule is dictated by a carbon–oxygen bond cleavage to form electronically excited (1D) and/or ground state (3P) oxygen atoms plus a carbon monoxide molecule. About 2% of the oxygen atoms react with carbon dioxide molecules to form the C2v symmetric, cyclic CO3 structure via addition to the carbon–oxygen double bond of the carbon dioxide species; neither the Cs nor the D3h symmetric isomers of carbon trioxide were detected. Since the addition of O(1D) involves a barrier of a 4–8 kJ mol−1 and the reaction of O(3P) with carbon dioxide to form the carbon trioxide molecule via triplet-singlet intersystem crossing is endoergic by 2 kJ mol−1, the oxygen reactant(s) must have excess kinetic energy (suprathermal oxygen atoms which are not in thermal equilibrium with the surrounding 10 K matrix). A second reaction pathway of the oxygen atoms involves the formation of ozone via molecular oxygen. After the irradiation, the carbon dioxide matrix still stores ground state oxygen atoms; these species diffuse even at 10 K and form additional ozone molecules. Summarized, our investigations show that the cyclic carbon trioxide isomer, CO3(X 1A1), can be formed in low temperature carbon dioxide matrix via addition of suprathermal oxygen atoms to carbon dioxide. In the solid state, CO3(X 1A1) is being stabilized by phonon interactions. In the gas phase, however, the initially formed C2v structure is rovibrationally excited and can ring-open to the D3h isomer which in turn rearranges back to the C2v structure and then loses an oxygen atom to ‘recycle’ carbon dioxide. This process might be of fundamental importance to account for an 18O enrichment in carbon dioxide in the atmospheres of Earth and Mars.

Related Literature

Synthesis of Ge-imogolite: influence of the hydrolysis ratio on the structure of the nanotubes

L. Olivi, C. Dominici, F. Ziarelli

2011-07-12 Paper

DOI: 10.1039/C1CP20346K

A layered structure at the surface of P3HT/PCBM blends

Natalya Schmerl, Gunther Andersson

2011-07-18 Paper

DOI: 10.1039/C1CP20734B

MnO2/TiN heterogeneous nanostructure design for electrochemical energy storage

Stefanie A. Sherrill, Jonathon Duay, Zhe Gui, Parag Banerjee, Gary W. Rubloff

2011-07-20 Paper

DOI: 10.1039/C1CP21815H

A theoretical study on structural, spectroscopic and energetic properties of acetamide clusters [CH3CONH2] (n = 1–15)

A. Subha Mahadevi, Y. Indra Neela, G. Narahari Sastry

2011-07-14 Paper

DOI: 10.1039/C1CP21346F

A theoretical study of pure and mixed caesium clusters and cluster ions, CslHmO 0/+n, l ≤ 5: geometry, energetics and photofragmentation

Sebastian Krapf, Maria Schill, Sebastian Krötz, Thorsten Koslowski

2011-07-14 Paper

DOI: 10.1039/C1CP21274E

Understanding microsolvation of Li+: structural and energetical analyses

Jonathan Romero, Andres Reyes, Jorge David, Albeiro Restrepo

2011-07-27 Paper

DOI: 10.1039/C1CP20903E

Photo-deactivation pathways of a double H-bonded photochromic Schiff base investigated by combined theoretical calculations and experimental time-resolved studies

Carlos Randino, Marcin Ziółek, Ricard Gelabert, Juan Angel Organero, Michal Gil, Miquel Moreno, José M. Lluch, Abderrazzak Douhal

2011-07-14 Paper

DOI: 10.1039/C1CP21039D

You might also like

155412-88-71-(3-Aminophenyl)-3-...
Compound Q&A

How should waste containing 1-(D-Ribofuranosyl)-1,4-dihydro-3-pyridinecarboxamide (CAS: 19132-12-8) be handled?

Waste containing 1-(D-Ribofuranosyl)-1,4-dihydro-3-pyridinecarboxamide (CAS: 191...

19132-12-81-(D-Ribofuranosyl)-...
Compound Q&A

What regulatory guidelines apply to 2-Methyl-2-propanyl 3-bromo-3-(hydroxymethyl)-1-azetidinecarboxylate (CAS: 2007919-81-3)?

2-Methyl-2-propanyl 3-bromo-3-(hydroxymethyl)-1-azetidinecarboxylate (CAS: 20079...

2007919-81-32-Methyl-2-propanyl ...
Compound Q&A

What is N-(4-Chloro-2-pyridinyl)acetamide (CAS: 245056-66-0)?

N-(4-Chloro-2-pyridinyl)acetamide (CAS: 245056-66-0) is a chemical compound with...

245056-66-0N-(4-Chloro-2-pyridi...
Compound Q&A

What is 5-Chloro-2-hydroxybenzoic acid (CAS: 321-14-2)?

5-Chloro-2-hydroxybenzoic acid, also known as 5-chlorosalicylic acid, is an arom...

321-14-25-Chloro-2-hydroxybe...
Compound Q&A

What precautions should be taken when handling 1,1-Dichloro-1-fluoroethane (CAS: 1717-00-6)?

When handling 1,1-Dichloro-1-fluoroethane (CAS: 1717-00-6), it is important to u...

1717-00-61,1-Dichloro-1-fluor...
Compound Q&A

What are the physical and chemical properties of Fmoc-(2S,3R)-3-phenylpyrrolidine-2-carboxylic acid (CAS: 281655-32-1)?

Fmoc-(2S,3R)-3-phenylpyrrolidine-2-carboxylic acid is a white crystalline solid ...

281655-32-1Fmoc-(2S,3R)-3-pheny...
Compound Q&A

What are the main uses of 4-Amino-5-bromo-2-pyridinecarboxylic acid (CAS: 1363381-01-4)?

4-Amino-5-bromo-2-pyridinecarboxylic acid is primarily used as a precursor in th...

1363381-01-44-Amino-5-bromo-2-py...
1007881-98-2(S)-tert-butyl 2-((2...
Compound Q&A

What precautions should be taken when handling 8-bromo-2,2-dimethyl-3,4-dihydro-2H-1,4-benzoxazin-3-one (CAS: 688363-73-7)?

When handling 8-bromo-2,2-dimethyl-3,4-dihydro-2H-1,4-benzoxazin-3-one, use prop...

688363-73-78-bromo-2,2-dimethyl...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.