Aspects of the stabilisation of emulsions by solid particles: Effects of line tension and monolayer curvature energy
Literature Information
Robert Aveyard, John H. Clint, Tommy S. Horozov
It is well-documented that solid particles can be effective stabilisers of emulsions, and that the type of the emulsion formed is related, inter alia, to the particle wettability. In general it is to be expected that the free energy change accompanying the formation of a solid-stabilised emulsion will be positive and that emulsion stability will therefore be kinetic in nature. Recently work has appeared showing that very small solid particles, with radius around say 15 nm, can be excellent stabilisers of emulsions. This raises the possibility that line tension acting in the three-phase contact lines around adsorbed particles could have an effect on particle adsorption and hence on their effectiveness as emulsion stabilisers. We explore the effects of both positive and negative line tension on the free energy of adsorption of spherical particles at spherically curved liquid interfaces and on the free energy of drop formation. For small particles it is shown that physically realistic values of positive line tension can lead to exclusion of particles from drop interfaces, either by rendering the adsorption free energy positive or by creating energy barriers to adsorption. We also consider the effects of lateral interactions between adsorbed particles on particle adsorption, particularly strong Coulombic repulsion mediated through the oil phase. It is known that the preferred type of emulsions stabilised by surfactants can be accounted for by the existence of a curvature energy possessed by close-packed surfactant monolayers. We show here that close-packed monolayers of spherical particles at a liquid surface also possess curvature energies, and we calculate bending elastic moduli (κ) as a function of particle size, oil/water interfacial tension, line tension and contact angle. For a monolayer of (hypothetical) particles with radius 0.5 nm (similar to that of a low molar mass surfactant), the value of κ is expected to be of the order of kT, just as for surfactant monolayers. It has been assumed in our work that equal spherical particles are hexagonally close-packed around spherical drops. It is well known however that such packing is not possible, but we show in an Appendix that the assumption of hexagonal packing leads to only small errors (in the context) in calculated free energies of emulsion formation and in the calculated bending elastic moduli of particle monolayers.
Related Literature
Influence of reconstruction on the structure of self-assembled normal-alkane monolayers on Au(111) surfaces
Zhao-Xiong Xie, Zhi-Feng Huang, Xin Xu
DOI: 10.1039/B109159J
Chemically induced oscillations in a pH-responsive hydrogel
Colin J. Crook, Andrew Smith, Richard A. L. Jones, Anthony J. Ryan
DOI: 10.1039/B109977A
Degradation of naphthalenesulfonic acids by oxidation with ozone in aqueous phase
J. Rivera-Utrilla, M. Sánchez-Polo, C. A. Zaror
DOI: 10.1039/B108194B
Rate constants for the reaction of HO2 radicals with cyclopentane and propane between 673 and 783 K
S. M. Handford-Styring, R. W. Walker
DOI: 10.1039/B108578F
Preferential solvation of Ca2+ in aqueous ammonia solution: Classical and combined ab initio quantum mechanical/molecular mechanical molecular dynamics simulations
Anan Tongraar, Kritsana Sagarik, Bernd Michael Rode
DOI: 10.1039/B107786D
Direct evidence for fixed ionic groups in the hydrogel of an electrolyte diode
Kristóf Iván, Norbert Kirschner, Mária Wittmann, Viktor Jakab, Zoltán Noszticzius, John H. Merkin, Stephen K. Scott
DOI: 10.1039/B109016J
A generalized “reaction–diffusion” model to describe spatio-temporal patterns in the catalytic CO oxidation on Pt(110)
Pierre Borckmans, Guy Dewel
DOI: 10.1039/B109389B
Thermodynamic properties and dielectric constants in water/methanol mixtures by integral equation theory and molecular dynamics simulations
DOI: 10.1039/B108724J
2D gel permeation chromatography (2D GPC) correlation studies of the growth process for perfluoro-octyltriethoxysilanepolymer aggregates
Kenichi Izawa, Toshiaki Ogasawara, Hideki Masuda, Hirofumi Okabayashi, Charmian J. O'Connor, Isao Noda
DOI: 10.1039/B107556J
Symmetry and distortive π-electrons in two- and three-dimensional conjugated systems
A. Rassat
DOI: 10.1039/B109712C
You might also like
What regulatory guidelines apply to 6-Bromo-2-methylimidazo[1,2-a]pyrimidine (CAS: 1111638-05-1)?
6-Bromo-2-methylimidazo[1,2-a]pyrimidine (CAS: 1111638-05-1) falls under various...
Are there alternatives to 1-Pyrrolidineethanol, β-methyl-α-phenyl-, (αS,βR) (CAS: 123620-80-4) in synthesis?
While there are no direct alternatives, similar compounds like 1-Pyrrolidineetha...
Is 4-Methyl-2,6-bis(2-methyl-2-propanyl)phenyl methylcarbamate (CAS: 1918-11-2) safe?
4-Methyl-2,6-bis(2-methyl-2-propanyl)phenyl methylcarbamate (CAS: 1918-11-2) is ...
How should 2-(3-Bromo-4-fluorophenyl)-1,3-dioxolane (CAS: 77771-04-1) be stored?
2-(3-Bromo-4-fluorophenyl)-1,3-dioxolane (CAS: 77771-04-1) should be stored in a...
What are the physical and chemical properties of 4,5,6,7-Tetrahydro-1H-indazole hydrochloride (CAS: 18161-11-0)?
4,5,6,7-Tetrahydro-1H-indazole hydrochloride is a white crystalline solid with a...
What is (2R)-1-Methoxy-3-phenyl-2-propanamine (CAS: 59919-07-2)?
(2R)-1-Methoxy-3-phenyl-2-propanamine is a chiral organic compound with the CAS ...
What industries use Ethyl 1-(1-phenylethyl)-1H-imidazole-5-carboxylate (CAS: 56649-47-9)?
Ethyl 1-(1-phenylethyl)-1H-imidazole-5-carboxylate is used in various industries...
What regulatory guidelines apply to 4-[(1E,3S)-1-(4-Hydroxyphenyl)-1,4-pentadien-3-yl]phenol (CAS: 17676-24-3)?
4-[(1E,3S)-1-(4-Hydroxyphenyl)-1,4-pentadien-3-yl]phenol (CAS: 17676-24-3) falls...
What industries use (S)-3-Amino-5-phenylpentanoic acid hydrochloride (CAS: 331846-97-0)?
(S)-3-Amino-5-phenylpentanoic acid hydrochloride is primarily used in the pharma...
How is 7-methoxy-1-benzothiophene-2-carboxylic acid (CAS: 88791-07-5) typically synthesized?
7-Methoxy-1-benzothiophene-2-carboxylic acid is typically synthesized by reactin...
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.














