An investigation of the prototype germylene addition reaction, GeH2 + C2H4: Time-resolved gas-phase kinetic studies and quantum chemical calculations of the reaction energy surface

Literature Information

Publication Date 2002-09-10
DOI 10.1039/B206180E
Impact Factor 3.676
Authors

Rosa Becerra, Sergey E. Boganov, Mikhail P. Egorov, Valery I. Faustov, Vladimir M. Promyslov, Oleg M. Nefedov, Robin Walsh


View Original

Abstract

Time resolved studies of germylene, GeH2, generated by laser flash photolysis of 3,4-dimethylgermacyclopentene-3, have been carried out to obtain rate constants for its bimolecular reaction with ethylene, C2H4. The reaction was studied in the gas-phase over the pressure range 1–100 Torr, with SF6 as bath gas, at 5 temperatures in the range 293–555 K. The reaction shows the characteristic pressure dependence of a third-body assisted association reaction. The high pressure rate constants, obtained by extrapolation, gave the Arrhenius equation: log(k∞/cm3 molecule−1 s−1) = (−10.61 ± 0.08) + (5.37 ± 0.56 kJ mol−1)/RT ln10. These Arrhenius parameters are consistent with a fast reaction occurring at approximately half the collision rate at 298 K. RRKM modelling based on a variational transition state, used in combination with a weak collisional deactivation model, gave good fits to the pressure dependent curves for a choice of the critical energy, E0 = 130 kJ mol−1. Quantum chemical calculations (both DFT and ab initio G2//QCISD) of the GeC2H6 potential energy surface (PES), show that GeH2 + C2H4 initially form a π-complex, which can either collapse to germirane or isomerise by a 1,2 H-shift to ethylgermylene with a relatively low barrier. This indicates that the observed pressure dependence must correspond the formation of two products, of which ethylgermylene is the more stable. It also shows that germiranes with 1-H substituents will thermally rearrange to ethylgermylenes with very low barriers. A detailed examination of the PES shows that other potential reaction products are unlikely to be formed. Thermochemical considerations show that germirane is less strained than silirane, and that divalent state stabilisation energies (DSSE) for germylenes are hardly greater than those for silylenes.

Related Literature

Responsive fluorinated lanthanide probes for 19F magnetic resonance spectroscopy

P. Kanthi Senanayake, Alan M. Kenwright, David Parker, Susanna K. van der Hoorn

2007-06-21 Communication

DOI: 10.1039/B705844F

Asymmetric autocatalytic Mannich reaction in the presence of water and its implication in prebiotic chemistry

Mohamed Amedjkouh, Maria Brandberg

2008-04-23 Communication

DOI: 10.1039/B804142N

Back matter

Front/Back Matter

DOI: 10.1039/B710034P

Front cover

Cover

DOI: 10.1039/B810191B

Formation of one-dimensional nickel wires by chemical reduction of nickel ions under magnetic fields

Lixia Sun, Qianwang Chen, Yan Tang, Ying Xiong

2007-04-30 Communication

DOI: 10.1039/B704689H

Highly selective 30% hydrogen peroxideoxidation of sulfides to sulfoxides using micromixing

Yoshiro Hirai, Masayuki Kirihara

2008-04-22 Communication

DOI: 10.1039/B802502A

One-pot, large-scale synthesis of SnO2nanotubes at room temperature

Ning Du, Hui Zhang, Bingdi Chen, Xiangyang Ma, Deren Yang

2008-04-21 Communication

DOI: 10.1039/B800401C

A chemo- and regio-selective three-component dihydropyrimidinone synthesis

Chris D. Bailey, Chris E. Houlden, Grégory L. J. Bar, Guy C. Lloyd-Jones, Kevin I. Booker-Milburn

2007-06-19 Communication

DOI: 10.1039/B707361E

A simple route to chiralphosphinous acid–boranes

Delphine Moraleda, David Gatineau, David Martin, Laurent Giordano, Gérard Buono

2008-04-22 Communication

DOI: 10.1039/B802817F

You might also like

Compound Q&A

Are there alternatives to 1-(4-Chlorophenyl)-N-hydroxymethanimine (CAS: 3848-36-0) in synthesis?

When considering alternatives to 1-(4-Chlorophenyl)-N-hydroxymethanimine (CAS: 3...

3848-36-01-(4-Chlorophenyl)-N...
Compound Q&A

How is 3-(4-Bromophenyl)-5-(2-fluorophenyl)-1,2,4-oxadiazole (CAS: 419553-16-5) typically synthesized?

3-(4-Bromophenyl)-5-(2-fluorophenyl)-1,2,4-oxadiazole is synthesized through a m...

419553-16-53-(4-Bromophenyl)-5-...
Compound Q&A

How is 5-Chloro-2-(4-chlorophenyl)-4-methyl-6-[3-(1-piperidinyl)propoxy]pyrimidine (CAS: 1639220-19-1) typically synthesized?

5-Chloro-2-(4-chlorophenyl)-4-methyl-6-[3-(1-piperidinyl)propoxy]pyrimidine (CAS...

1639220-19-15-Chloro-2-(4-chloro...
Compound Q&A

What industries use 2-Chloro-4-(difluoromethoxy)pyridine (CAS: 1206978-15-5)?

2-Chloro-4-(difluoromethoxy)pyridine is used in the pharmaceutical industry for ...

1206978-15-52-Chloro-4-(difluoro...
Compound Q&A

What regulatory guidelines apply to 3-Chloro-6-methylpyridazine (CAS: 1121-79-5)?

3-Chloro-6-methylpyridazine (CAS: 1121-79-5) is classified under the Globally Ha...

1121-79-53-Chloro-6-methylpyr...
Compound Q&A

Are there alternatives to Methyl 4,5-dimethyl-2-nitrobenzoate in synthesis?

Several alternatives can be used in the synthesis of Methyl 4,5-dimethyl-2-nitro...

90922-74-0Methyl 4,5-dimethyl-...
Compound Q&A

Are there alternatives to (2E,2'E)-3,3'-(1,4-Phenylene)bisacrylaldehyde in synthesis?

Alternatives to (2E,2'E)-3,3'-(1,4-Phenylene)bisacrylaldehyde include other acry...

63405-68-5(2E,2'E)-3,3'-(1,4-P...
Compound Q&A

What is 3-Amino-5-chloropyridin-2-ol hydrochloride (CAS: 1261906-29-9)?

3-Amino-5-chloropyridin-2-ol hydrochloride is an organic compound with the CAS n...

1261906-29-93-Amino-5-chloropyri...
Compound Q&A

What precautions should be taken when handling 6,7-Difluoro-2,3-dihydro-4H-chromen-4-one (CAS: 1092349-93-3)?

When handling 6,7-Difluoro-2,3-dihydro-4H-chromen-4-one, it is essential to wear...

1092349-93-36,7-Difluoro-2,3-dih...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.