Propagating fronts in periodic precipitation systems with redissolution
Literature Information
When co-precipitate ions interdiffuse in a gel medium, the sparingly soluble salt may precipitate in a stratification of parallel bands, traditionally known as Liesegang bands. In some salt systems, the precipitate can redissolve in excess diffusing electrolyte due to complex formation. As a result, the whole pattern propagates via band formation due to precipitation and band disappearance due to redissolution driven by complex formation. The properties of such unusual migrating Liesegang patterns were studied in our laboratory with an emphasis on the Co(OH)2 system. The latter is soluble in excess NH4OH because of the formation of the Co(NH3)62+ complex ion. We review the main experiments and results on that system and discuss potential directions for the extension of this research. In the Co(OH)2 propagation, the number of bands exhibits chaotic oscillations with time. The variation of the velocity of propagation with the concentrations of both inner and outer electrolytes was investigated, and the correlation between dissolution and precipitation was found to approach linearity at long times. An electric field of variable strength was applied across the propagation medium and a profound effect on the pattern properties was demonstrated. The introduction of Ni2+ ions, which compete with Co2+ for complex formation, induced oscillations in the band locations (at a given time) with concentration of diffusing electrolyte. It was shown that the intermediate species NH4+ is a precursor of such oscillations. The system was modeled using the theory of Polezhaev and Müller, incorporating ion diffusion, nucleation and kinetics of particle growth augmented by the dissolution process in a special kinetic scheme. The calculations agree qualitatively with the experimental results.
Related Literature
Chemical conversion of biomass-derived hexose sugars to levulinic acid over sulfonic acid-functionalized graphene oxide catalysts
Ji-Woong Yoon, Dong Won Hwang, Harold H. Kung
DOI: 10.1039/C3GC40353J
Microwave-assisted synthesis of sulfonic acid-functionalized microporous materials for the catalytic etherification of glycerol with isobutene
María Dolores González, Pilar Salagre, Elena Taboada, Jordi Llorca, Yolanda Cesteros
DOI: 10.1039/C3GC40683K
Flower-like mesoporous silica: a bifunctionalized catalyst for rhodium-catalyzed asymmetric transfer hydrogenation of aromatic ketones in aqueous medium
Fei Gao, Ronghua Jin, Dacheng Zhang, Quanxi Liang, Qunqun Ye, Guohua Liu
DOI: 10.1039/C3GC40547H
Selective aqueous phase oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid over Pt/C catalysts: influence of the base and effect of bismuth promotion
Hicham Ait Rass, Nadine Essayem, Michèle Besson
DOI: 10.1039/C3GC40727F
Carboxylation of terminal alkynes at ambient CO2 pressure in ethylene carbonate
Bing Yu, Zhen-Feng Diao, Chun-Xiang Guo, Chun-Lai Zhong, Liang-Nian He, Ya-Nan Zhao, Qing-Wen Song, An-Hua Liu, Jin-Quan Wang
DOI: 10.1039/C3GC40896E
Palladium on iron oxide nanoparticles: the morphological effect of the support in glycerol hydrogenolysis
Junwei Ge, Ziyan Zeng, Fenglin Liao, Xinlin Hong
DOI: 10.1039/C3GC40712H
Rhodium-catalyzed hydrogenation of olefins in γ-valerolactone-based ionic liquids
Andrea Strádi, Márk Molnár, Mihály Óvári, Gábor Dibó, Frank U. Richter, László T. Mika
DOI: 10.1039/C3GC40360B
A waste-minimized protocol for the preparation of 1,2-azido alcohols and 1,2-amino alcohols
Eleonora Ballerini, Paolo Crotti, Ileana Frau, Daniela Lanari, Ferdinando Pizzo, Luigi Vaccaro
DOI: 10.1039/C3GC40988K
Lignin to lipid bioconversion by oleaginous Rhodococci
Matyas Kosa, Arthur J. Ragauskas
DOI: 10.1039/C3GC40434J
Graphene oxide as a facile acid catalyst for the one-pot conversion of carbohydrates into 5-ethoxymethylfurfural
Tiansheng Deng, Yingxiong Wang, Yongqin Qi, Xindong Mu, Xianglin Hou
DOI: 10.1039/C3GC41109E
You might also like
What precautions should be taken when handling 4-Methyl-6-(trifluoromethyl)quinoline (CAS: 40716-16-3)?
When handling 4-Methyl-6-(trifluoromethyl)quinoline (CAS: 40716-16-3), safety go...
What is 4-(3,5-Difluorophenyl)aniline (CAS: 405058-00-6)?
4-(3,5-Difluorophenyl)aniline is an aromatic organic compound with the CAS numbe...
How is 5-{[4-(Trifluoromethyl)phenyl]sulfanyl}-1,2,3-thiadiazole-4-carboxylic acid (CAS: 338982-07-3) typically synthesized?
5-{[4-(Trifluoromethyl)phenyl]sulfanyl}-1,2,3-thiadiazole-4-carboxylic acid can ...
What is the market or research trend for 4-Benzylaniline hydrochloride (CAS: 6317-57-3)?
The market for 4-Benzylaniline hydrochloride (CAS: 6317-57-3) is steadily growin...
Is [3-(Diethylsulfamoyl)phenyl]boronic acid (CAS: 871329-58-7) safe?
[3-(Diethylsulfamoyl)phenyl]boronic acid is generally considered safe when handl...
What are the main uses of 3-Bromo-2,5-dimethoxyaniline (CAS: 115929-62-9)?
3-Bromo-2,5-dimethoxyaniline is mainly used in the pharmaceutical and chemical i...
What regulatory guidelines apply to N-Methyl-1-(5-methyl-1H-indol-3-yl)methanamine (CAS: 915922-67-7)?
N-Methyl-1-(5-methyl-1H-indol-3-yl)methanamine (CAS: 915922-67-7) is subject to ...
What industries use Carbamic acid, N-[(5S)-5,6-diamino-6-oxohexyl]-, 1,1-dimethylethyl ester (CAS: 24828-96-4)?
This compound is primarily used in the pharmaceutical industry for the synthesis...
How should 2-Methyl-2-propanyl [(1S,3R)-3-aminocyclohexyl]carbamate (CAS: 1298101-47-9) be stored?
2-Methyl-2-propanyl [(1S,3R)-3-aminocyclohexyl]carbamate (CAS: 1298101-47-9) sho...
What industries use Ethyl 2-bromo-4,4,4-trifluorobutanoate (CAS: 367-33-9)?
Ethyl 2-bromo-4,4,4-trifluorobutanoate (CAS: 367-33-9) is utilized in the pharma...
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.










![2,4-Dichloro-6-isopropyl-5H-pyrrolo[3,4-d]pyrimidin-7(6H)-one structure 2,4-Dichloro-6-isopropyl-5H-pyrrolo[3,4-d]pyrimidin-7(6H)-one structure](https://static.chemtradehub.com/structs/107/1079649-94-7-ad4a.webp)

![Imidazo[1,2-c]pyrimidine structure Imidazo[1,2-c]pyrimidine structure](https://static.chemtradehub.com/structs/274/274-78-2-8b4c.webp)

