Zeolite proton-assisted reoxidation of Cu0 in over-exchanged CuII-ZSM-5 reduced by hydrogen. (1) Reoxidation in Ar stream: an FTIR study

Literature Information

Publication Date
DOI 10.1039/A905861C
Impact Factor 3.676
Authors


View Original

Abstract

Reoxidation of Cu0 (3.1 wt%) in ZSM-5 (nSi/nAl=20) produced by over-exchange (nCu/nAl=0.75) and a subsequent reduction with H2 (773 K, 30 min) was studied in an Ar stream using FTIR spectroscopy. Above 573 K, the decrease in the intensity of the OH stretching band at 3611 cm-1 raised the consideration that some Cu0 atoms were reoxidized to copper ions by zeolitic protons. The changes in the skeletal vibrations, namely in the internal (T–O–T) asymmetric stretching vibration (νasint) in the range 1050–900 cm-1, indicated that (i) mainly Cu+ ions formed (975 cm-1); however, the reoxidation did not stop at this stage: a small amount of CuII species (937–925 cm-1) was also produced. (ii) More or less, electronic interactions might occur between the different copper species inside the zeolite channels. The Arrhenius plots between 573 and 773 K based on the temperature-dependent decreases in the absorbance and integrated intensity of the 3611 cm-1 band resulted in apparent activation energies (Eapps) of 42–46 kJ mol-1 (≈10–11 kcal mol-1) attributed the reoxidation of Cu0 caused in Ar by zeolitic H+. Basic processes and reasonable mechanisms related to the above reoxidation of Cu0 to Cu+ are also discussed.

Related Literature

Analysis of the effect of the operational conditions in a combined adsorption–ozonation process with granular activated carbon for the treatment of phenol wastewater

Cristian Ferreiro, Natalia Villota, Ana de Luis, Jose Ignacio Lombraña

2020-02-12 Paper

DOI: 10.1039/C9RE00424F

Simultaneous catalytic reduction of SO2 and NO from flue gas using H2S as a reductant at low temperatures

Xianghong Lü, Hao Li, Xiaohui Du, Xue Wang, Minyi Lan, Jianlin Wu, Jin Zhu, Jianliang Sun, Feng Jiang

2020-01-15 Paper

DOI: 10.1039/C9RE00347A

Reaction-volume dependent chemistry of highly selective photocatalytic reduction of nitrobenzene

Seungwook Jang, Bum-Joon Jung, Mi-Jeong Kim, Dong-Pyo Kim

2019-08-02 Communication

DOI: 10.1039/C9RE00251K

The interplay between ceria particle size, reducibility, and ethanol oxidation activity of ceria-supported gold catalysts

Gregory M. Mullen, Edward J. Evans, Jr., Benjamin C. Siegert, Nathan R. Miller, Benjamin K. Rosselet, Iliya Sabzevari, Adrianna Brush, Zhiyao Duan

2018-01-05 Paper

DOI: 10.1039/C7RE00175D

Insights into coated NiCrAl open-cell foams for the catalytic partial oxidation of CH4

Phuoc Hoang Ho, Wout de Nolf, Francesca Ospitali, Didier Beton, Lars Torkuhl, Giuseppe Fornasari, Angelo Vaccari, Patricia Benito

2019-07-08 Paper

DOI: 10.1039/C9RE00178F

Ultra-low formation of octahydrophenazine in the Beckmann rearrangement of cyclohexanone oxime using a microreactor

Chencan Du, Yunpeng Hu, Jisong Zhang, Guangsheng Luo

2019-07-26 Paper

DOI: 10.1039/C9RE00246D

Synthesis and molecular weight control of poly(3-hexylthiophene) using electrochemical polymerization in a flow microreactor

Masatsugu Mizuno, Hiroyuki Tateno, Yoshimasa Matsumura, Mahito Atobe

2017-07-26 Communication

DOI: 10.1039/C7RE00089H

Front cover

Cover

DOI: 10.1039/C7RE90020A

A hierarchical approach to chemical reactor engineering: an application to micro packed bed reactors

Mauro Bracconi, Anthony G. Dixon, Matteo Maestri

2018-01-08 Paper

DOI: 10.1039/C7RE00195A

You might also like

Compound Q&A

What is 3-Fluoro-2-methylbenzylamine (CAS: 771573-36-5)?

3-Fluoro-2-methylbenzylamine is an organic compound with the CAS number 771573-3...

771573-36-53-Fluoro-2-methylben...
Compound Q&A

Is Tert-butyl 2-(oxetan-3-ylidene)acetate (CAS: 1207175-03-8) safe?

Tert-butyl 2-(oxetan-3-ylidene)acetate is considered safe for its intended uses ...

1207175-03-8Tert-butyl 2-(oxetan...
Compound Q&A

What precautions should be taken when handling 4-Acetyl-2-fluorobenzonitrile (CAS: 214760-18-6)?

Proper personal protective equipment (PPE) such as gloves, goggles, and a lab co...

214760-18-64-Acetyl-2-fluoroben...
Compound Q&A

How is 2-Ethyl-4-methyl-1,3-thiazole (CAS: 15679-12-6) typically synthesized?

2-Ethyl-4-methyl-1,3-thiazole is commonly synthesized via the reaction of thiour...

15679-12-62-Ethyl-4-methyl-1,3...
Compound Q&A

How should 5',5''-([2,2'-Bithiophene]-5,5'-diyl)bis(([1,1':3',1''-terphenyl]-4,4''-dicarboxylic acid)) (CAS: 1227780-71-3) be stored?

This compound should be stored in a cool, dry place away from direct sunlight an...

1227780-71-35',5''''-([2,2'-Bith...
Compound Q&A

What regulatory guidelines apply to L-Lysine Acetate Salt (CAS: 52315-92-1)?

L-Lysine Acetate Salt (CAS: 52315-92-1) is subject to various regulatory guideli...

52315-92-1L-LYSINE ACETATE SAL...
Compound Q&A

Is 6-Fluoro-3-hydroxy-2-pyrazinecarboxamide (CAS: 259793-96-9) safe?

6-Fluoro-3-hydroxy-2-pyrazinecarboxamide (CAS: 259793-96-9) is generally conside...

259793-96-96-Fluoro-3-hydroxy-2...
Compound Q&A

What are the physical and chemical properties of 1,1'-Sulfonylbis(1H-imidazole) (CAS: 7189-69-7)?

1,1'-Sulfonylbis(1H-imidazole) is a crystalline solid with a molecular weight of...

7189-69-71,1'-Sulfonylbis(1H-...
Compound Q&A

What industries use 4-methyl-7-nitro-1H-indole-3-carbonitrile (CAS: 289483-82-5)?

4-Methyl-7-nitro-1H-indole-3-carbonitrile (CAS: 289483-82-5) is primarily used i...

289483-82-54-methyl-7-nitro-1H-...
Compound Q&A

How should waste containing 5-Bromo-3-indolyl-beta-galactoside (CAS: 97753-82-7) be handled?

Waste containing 5-Bromo-3-indolyl-beta-galactoside (CAS: 97753-82-7) should be ...

97753-82-75-Bromo-3-indolyl-be...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.