The UV absorption of ClO Part 2. Predissociation of the A2ΠΩstate studied by ab-initio and Fermi golden rule calculations
Literature Information
Ab-initio calculations at the CASSCF and MRCI level have been performed on the valence doublet and quartet electronic states of the ClO radical in order to explore the predissociation dynamics of the A2ΠΩ state (Ω=1/2 or 3/2). The ab-initio calculations neglect spin–orbit coupling. Large basis sets with diffuse orbitals were employed to ensure the calculated X2Π and A2Π potentials match closely the available experimental data. In total, the potential energies of fifteen valence states were computed at a series of internuclear separations in order to map the potential energy curves. The X2Π, A2Π and a4Σ- potentials are bound; though the latter has yet to be observed experimentally. All the other states are repulsive, and the lowest ten cross the A2Π3/2 component at energies below the v′=6 vibrational level. Using arguments based on electronic configurations, candidate states for the predissociation of the A2ΠΩ state can be selected. Simulations of the predissociation were performed by Fermi golden rule calculations for each vibrational level, using the ab-initio repulsive potentials and RKR curves for the A2Π3/2 and A2Π1/2 states. The vibrational dependence of the predissociation rate in the A2Π3/2 component was used to derive the magnitude of the individual couplings with the repulsive potentials. Comparison between the lifetimes of the vibrational levels in the A2Π3/2 and A2Π1/2 components restricts the principal players in the predissociation to three repulsive states: 14ΣΩ+, 24ΣΩ- and 32ΠΩ. The possibility of coupling between the A2Π3/2 component and the 12Δ state is also suspected. A marked similarity is revealed for the variation of predissociation rates with v′ for the A2Π3/2 and A2Π1/2 components despite a spin–orbit state dependence of the absolute rates for individual v′ levels. A repulsive 22Σ+ state is identified which is likely to be involved in the UV photodissociation of ClO. Similar ab-initio calculations on FO have revealed no bound excited valence 2Π state correlating diabatically to the Cl(2P)+O(1D) dissociation limit.
Related Literature
Fe(AsO4): A new iron(iii) arsenate synthesized from thermal treatment of (NH4)[Fe(AsO4)F]
Begoña Bazán, José L. Mesa, José L. Pizarro, Andrés T. Aguayo, María I. Arriortua, Teófilo Rojo
DOI: 10.1039/B210998K
Adsorbed water for the electro-oxidation of methanol at Pt–Ru alloy
Takahiro Yajima, Noriaki Wakabayashi, Hiroyuki Uchida, Masahiro Watanabe
DOI: 10.1039/B212197B
A convenient stereoselective synthesis of trifluoromethyl-substituted polyfunctionalized cyclopropane: synthesis of (±)-trans-trifluoronorcoronamic acid
Biao Jiang, Fangjiang Zhang, Wennan Xiong
DOI: 10.1039/B210642F
Highly regio- and stereoselective four-component iodoamination of Se-substituted allenes. an efficient synthesis of N-(3-organoseleno-2-iodo-2(Z)-propenyl) acetamides
Xueshi Hao, Xian Huang
DOI: 10.1039/B300879G
Control of Al distribution in ZSM-5 by conditions of zeolite synthesis
DOI: 10.1039/B301634J
Polyoxometalate-catalysed epoxidation of 1-octene with hydrogen peroxide in microemulsions coupled with ultrafiltration
Arnold Lambert, Pawel Plucinski, Ivan V. Kozhevnikov
DOI: 10.1039/B300494P
Site-selective RNA scission at two sites for precise genotyping of SNPs by mass spectrometry‡
Akinori Kuzuya, Ryo Mizoguchi, Fumi Morisawa, Makoto Komiyama
DOI: 10.1039/B300368J
Controlled synthesis of homopolymers and block copolymers based on 2-(acetoacetoxy)ethyl methacrylatevia RAFT radical polymerisation
Theodora Krasia, Rémi Soula, Hans G. Börner, Helmut Schlaad
DOI: 10.1039/B212634F
A highly sensitive and selective fluorescent molecular sensor for Pb(ii) based on a calix[4]arene bearing four dansyl groups
Rémi Métivier, Isabelle Leray, Bernard Valeur
DOI: 10.1039/B301323E
Purification of dodecanethiol derivatised gold nanoparticles
Cecilia A. Waters, Allan J. Mills, Kathleen A. Johnson, David J. Schiffrin
DOI: 10.1039/B211874B
You might also like
What precautions should be taken when handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3)?
When handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3), it ...
What precautions should be taken when handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9)?
When handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9), it...
How should waste containing 2-[2-(2-Methoxyethoxy)ethoxy]ethyl 4-methylbenzenesulfonate (CAS: 62921-74-8) be handled?
Waste containing this compound (CAS: 62921-74-8) should be handled according to ...
How should waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate be handled?
Waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate should be collected i...
How is 5-({4-[(2S,4R)-4-Hydroxy-2-methyltetrahydro-2H-pyran-4-yl]-2-thienyl}sulfanyl)-1-methyl-1,3-dihydro-2H-indol-2-one (CAS: 166882-70-8) typically synthesized?
This compound can be synthesized using a multi-step process involving the conjug...
Are there alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid (CAS: 7312-27-8) in synthesis?
There are several alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid in syn...
How should Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84-9) be stored?
Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84...
How should waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) be handled?
Waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) should be coll...
How is Methyl 5-iodo-2-methylbenzoate (CAS: 103440-54-6) typically synthesized?
Methyl 5-iodo-2-methylbenzoate can be synthesized through the iodination of meth...
How is 5-Chloro[1,2,4]triazolo[1,5-a]pyridine (CAS: 1427399-34-5) typically synthesized?
5-Chloro[1,2,4]triazolo[1,5-a]pyridine is commonly synthesized via the condensat...
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.










![1,2-Diphenyl-4-[2-(phenylsulfinyl)ethyl]-3,5-pyrazolidinedione structure 1,2-Diphenyl-4-[2-(phenylsulfinyl)ethyl]-3,5-pyrazolidinedione structure](https://static.chemtradehub.com/structs/57-/57-96-5-efcc.webp)


![[4-Amino-2-(methylsulfanyl)-5-pyrimidinyl]methanol structure [4-Amino-2-(methylsulfanyl)-5-pyrimidinyl]methanol structure](https://static.chemtradehub.com/structs/588/588-36-3-fc73.webp)
![5-Acetyl-2,3-dihydrobenzo[b]furan structure 5-Acetyl-2,3-dihydrobenzo[b]furan structure](https://static.chemtradehub.com/structs/908/90843-31-5-eea4.webp)