Molecularly imprinted nanoparticle-based assay (MINA) for microcystin-LR detection in water

Literature Information

Publication Date 2022-12-14
DOI 10.1039/D2AN01680J
Impact Factor 4.616
Authors

Yadiris García, Myleidi Vera, Verónica A. Jiménez, Luis F. Barraza, Joao Aguilar, Susana Sánchez, Eduardo D. Pereira


View Original

Abstract

Microcystins (MCs) are highly toxic peptides produced by cyanobacteria during algal blooms. Microcystin-leucine-arginine (MC-LR) is the most toxic and common MC variant with major effects on human and animal health upon exposure. MC-LR detection has become critical to ensure water safety, therefore robust and reliable analytical methods are needed. This work reports the development of a simple and optimized Molecularly Imprinted Nanoparticle-Based Assay (MINA) for MC-LR detection in water. Molecularly Imprinted Nanoparticles (MINs) were prepared by solid-phase polymerization on glass beads conjugated to MC-LR through (3-aminopropyl) triethoxysilane (APTES) via amide bonding. APTES-modified glass beads were obtained under optimized conditions to maximize the density of surface amino groups available for MC-LR conjugation. Two quinary mixtures of acrylic monomers differing in charge, polarity, and functionality were selected from molecular docking calculations and used to obtain MINs for MC-LR recognition using N,N′-methylene-bis-acrylamide (BIS) as the crosslinking agent. MINs were immobilized by physical adsorption onto 96-well polystyrene microplate and evaluated as per their rebinding capacity toward the analyte by using a covalent conjugate between MC-LR and the enzyme horseradish peroxidase (HRP). Experimental conditions for the MINs immobilization protocol, HRP-MC-LR concentration, and composition of the blocking solution were set to maximize the colorimetric response of the MINs compared to non-treated wells. Optimized conditions were then applied to conduct competitive MINAs with the HRP-MC-LR conjugate and the free analyte, which confirmed the preferential binding of MC-LR to the immobilized MINs for analyte concentrations ranging from 1 × 10−5 nmol L−1 to 100 nmol L−1. The best competitive MINA showed a limit of detection of 2.49 × 10−4 nmol L−1 and coefficients of variation less than 10% (n = 6), which are auspicious for the use of MINs as analytical tools for MC-LR detection below the permissible limits issued by WHO for safe water consumption (1.00 nmol L−1). This assay also proved to be selective to the analyte in cross-reactivity studies with two analogous microcystins (MC-RR and MC-YR). Analyses of lagoon and drinking water samples enriched with MC-LR revealed strong matrix effects that reduce the MINA response to the analyte, thus suggesting the need for sample pretreatment methods in future development in this subject.

Related Literature

Organic–inorganic nanohybrids based on an AIE luminogen-functional polymer and CdTe/ZnS QDs: morphologies, optical properties, and applications

Bingfeng Shi, Jianhua Lü, Ying Liu, Yang Xiao, Changli Lü

2021-06-02 Paper

DOI: 10.1039/D1PY00308A

Composition processing property relationship of vitrimers Based on polyethyleneimine

Natanel Jarach, Daniel Golani, Ofer Asaf, Hanna Dodiuk, Yoav Shamir, Amir Goldbourt, Samuel Kenig, Naum Naveh

2021-04-06 Paper

DOI: 10.1039/D1PY00116G

Back cover

2021-07-17 Cover

DOI: 10.1039/D1PY90093E

Mediating covalent crosslinking of single-chain nanoparticles through solvophobicity in organic solvents

Georg M. Scheutz, Justine Elgoyhen, Kyle C. Bentz, Hao Sun, Junpeng Zhao, Daniel A. Savin, Brent S. Sumerlin

2021-07-27 Communication

DOI: 10.1039/D1PY00780G

Synthesis and properties of helically-folded poly(arylenediethynylene)s

Michihisa Toya

2021-05-10 Paper

DOI: 10.1039/D1PY00144B

Toughened PLA-b-PCL-b-PLA triblock copolymer based biomaterials: effect of self-assembled nanostructure and stereocomplexation on the mechanical properties

Neha Mulchandani, Kazunari Masutani, Sachin Kumar, Hideki Yamane, Yoshiharu Kimura, Vimal Katiyar

2021-06-18 Paper

DOI: 10.1039/D1PY00429H

Photo cleavable thioacetal block copolymers for controlled release

Yongjun Men, Tobias G. Brevé, Antonia G. Denkova, Rienk Eelkema

2021-06-08 Paper

DOI: 10.1039/D1PY00514F

You might also like

Compound Q&A

What precautions should be taken when handling lithium chloride hydrate (1:1:1) (CAS: 16712-20-2)?

When handling lithium chloride hydrate (1:1:1) (CAS: 16712-20-2), it is importan...

16712-20-2Lithium chloride hyd...
Compound Q&A

Is 4-(4H-1,2,4-Triazol-4-yl)piperidine (CAS: 690261-92-8) safe?

4-(4H-1,2,4-Triazol-4-yl)piperidine is generally considered safe for use in phar...

690261-92-84-(4H-1,2,4-Triazol-...
Compound Q&A

How should waste containing 1,3-Thiazole-2-carboxamide (CAS: 16733-85-0) be handled?

Waste containing 1,3-Thiazole-2-carboxamide (CAS: 16733-85-0) should be collecte...

16733-85-01,3-Thiazole-2-carbo...
Compound Q&A

What regulatory guidelines apply to 5-(Difluoromethyl)-2-fluorobenzonitrile (CAS: 934175-58-3)?

5-(Difluoromethyl)-2-fluorobenzonitrile (CAS: 934175-58-3) is subject to regulat...

934175-58-35-(Difluoromethyl)-2...
Compound Q&A

How is Methyl 3-acetamido-2-thiophenecarboxylate (CAS: 22288-79-5) typically synthesized?

Methyl 3-acetamido-2-thiophenecarboxylate can be synthesized by the reaction of ...

22288-79-5Methyl 3-acetamido-2...
Compound Q&A

What is 4-Isoquinolinecarbonitrile (CAS: 34846-65-6)?

4-Isoquinolinecarbonitrile is a chemical compound with the CAS number 34846-65-6...

34846-65-64-Isoquinolinecarbon...
Compound Q&A

How should Methyl 1H-1,2,3-triazole-4-carboxylate (CAS: 877309-59-6) be stored?

Store Methyl 1H-1,2,3-triazole-4-carboxylate (CAS: 877309-59-6) in a cool, dry p...

877309-59-6Methyl 1H-1,2,3-tria...
Compound Q&A

What regulatory guidelines apply to 6-Bromo[1,3]thiazolo[5,4-b]pyridin-2-amine (CAS: 1160791-13-8)?

6-Bromo[1,3]thiazolo[5,4-b]pyridin-2-amine (CAS: 1160791-13-8) is subject to the...

1160791-13-86-Bromo[1,3]thiazolo...
Compound Q&A

Is (2S,3S)-2-Ammonio-3-(3,4-dihydroxyphenyl)-3-hydroxypropanoate (CAS: 23651-95-8) safe?

(2S,3S)-2-Ammonio-3-(3,4-dihydroxyphenyl)-3-hydroxypropanoate (CAS: 23651-95-8) ...

23651-95-8(2S,3S)-2-Ammonio-3-...
Compound Q&A

What are the physical and chemical properties of 7-bromo-3-methyl-3,4-dihydroquinazolin-4-one (CAS: 1293987-84-4)?

7-Bromo-3-methyl-3,4-dihydroquinazolin-4-one is a solid with a crystalline form....

1293987-84-47-bromo-3-methyl-3,4...

Source Journal

Analyst

Analyst
CiteScore: 7.8
Self-citation Rate: 5.6%
Articles per Year: 653

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.