A colorimetric aptasensor based on a hemin/EpCAM aptamer DNAzyme for sensitive exosome detection

Literature Information

Publication Date 2022-10-05
DOI 10.1039/D2AN01410F
Impact Factor 4.616
Authors

Jingjing Kuang, Zhibo Fu, Xuezhi Sun, Chuhui Lin, Shenglong Yang, Jiayao Xu, Min Zhang, Hongyang Zhang, Fanghong Ning, Ping Hu


View Original

Abstract

Exosomes are considered as potential biomarkers that can reflect information from their parent cell-associated cancer microenvironment. Recently, aptasensors have been widely used for cancer and tumor exosome detection. Aptamers related to exosome surface proteins are usually used to introduce a sequence; the aptamer is used for exosome recognition, and the introduced sequence is used to form G-quadruplexes and for signal amplification. In this paper, we found that the EpCAM aptamer is rich in guanine and unimolecular G-quadruplex with a two-layer G-tetrad under acidic conditions, and we investigated its topology, thermal stability and dissociation constant with hemin. Based on this, our proposed colorimetric aptamer sensor combines the unmodified EpCAM aptamer with hemin to construct a hemin/G-quadruplex DNAzyme and catalyze the TMB–H2O2 system to generate a strong colorimetric signal. Therefore, colorimetric signal changes were negatively correlated with the exosome concentration. The linear range of the 1 h assay was 106–108 particles per mL, and the detection limit was 3.94 × 105 particles per mL. In addition, this method can detect exosomes in complex fetal bovine serum samples with good specificity and high sensitivity toward exosomes from breast, liver, and lung cancers with abnormal EpCAM protein expression.

Related Literature

Novel carbazole-acridine-based hole transport polymer for low turn-on voltage of green quantum dot light-emitting diodes

Chai Won Kim, Ji Hye Lee, Seunguk Cho, Hyung Jong Kim, Jinhyo Hwang, Yong Woo Kim, Dae Hyuk Choi, Min Ju Cho, Kwangyeol Lee, Dong Hoon Choi

2021-07-26 Paper

DOI: 10.1039/D1PY00497B

Back cover

2021-06-29 Cover

DOI: 10.1039/D1PY90090K

Correction: Synthesis and structural characterization of bio-based bis(cyclic carbonate)s for the preparation of non-isocyanate polyurethanes

Kamila Błażek, Hynek Beneš, Zuzana Walterová, Sabina Abbrent, Arantxa Eceiza, Tamara Calvo-Correas, Janusz Datta

2021-03-31 Correction

DOI: 10.1039/D1PY90040D

Cross-linked polyurethane with dynamic phenol-carbamate bonds: properties affected by the chemical structure of isocyanate

Jiaxin Shi, Tianze Zheng, Yao Zhang, Baohua Guo, Jun Xu

2021-03-23 Paper

DOI: 10.1039/D1PY00157D

Photo cleavable thioacetal block copolymers for controlled release

Yongjun Men, Tobias G. Brevé, Antonia G. Denkova, Rienk Eelkema

2021-06-08 Paper

DOI: 10.1039/D1PY00514F

A dual stimuli responsive natural polymer based superabsorbent hydrogel engineered through a novel cross-linker

Safiya Nisar, Sonal Chauhan, Gurmeet Singh, Virender Singh, Sunita Rattan

2021-03-23 Paper

DOI: 10.1039/D0PY01729A

Contents list

2021-07-21 Front/Back Matter

DOI: 10.1039/D1PY90098F

RAFT polymerisation of trifluoroethylene: the importance of understanding reverse additions

Marc Guerre, Cédric Totée, Gilles Silly, Olinda Gimello, Bruno Améduri, Jean-François Tahon, Rinaldo Poli, Sophie Barrau, Vincent Ladmiral

2021-03-15 Paper

DOI: 10.1039/D0PY01754J

Front cover

2021-04-13 Cover

DOI: 10.1039/D1PY90051J

You might also like

Compound Q&A

What precautions should be taken when handling lithium chloride hydrate (1:1:1) (CAS: 16712-20-2)?

When handling lithium chloride hydrate (1:1:1) (CAS: 16712-20-2), it is importan...

16712-20-2Lithium chloride hyd...
Compound Q&A

Is 4-(4H-1,2,4-Triazol-4-yl)piperidine (CAS: 690261-92-8) safe?

4-(4H-1,2,4-Triazol-4-yl)piperidine is generally considered safe for use in phar...

690261-92-84-(4H-1,2,4-Triazol-...
Compound Q&A

How should waste containing 1,3-Thiazole-2-carboxamide (CAS: 16733-85-0) be handled?

Waste containing 1,3-Thiazole-2-carboxamide (CAS: 16733-85-0) should be collecte...

16733-85-01,3-Thiazole-2-carbo...
Compound Q&A

What regulatory guidelines apply to 5-(Difluoromethyl)-2-fluorobenzonitrile (CAS: 934175-58-3)?

5-(Difluoromethyl)-2-fluorobenzonitrile (CAS: 934175-58-3) is subject to regulat...

934175-58-35-(Difluoromethyl)-2...
Compound Q&A

How is Methyl 3-acetamido-2-thiophenecarboxylate (CAS: 22288-79-5) typically synthesized?

Methyl 3-acetamido-2-thiophenecarboxylate can be synthesized by the reaction of ...

22288-79-5Methyl 3-acetamido-2...
Compound Q&A

What is 4-Isoquinolinecarbonitrile (CAS: 34846-65-6)?

4-Isoquinolinecarbonitrile is a chemical compound with the CAS number 34846-65-6...

34846-65-64-Isoquinolinecarbon...
Compound Q&A

How should Methyl 1H-1,2,3-triazole-4-carboxylate (CAS: 877309-59-6) be stored?

Store Methyl 1H-1,2,3-triazole-4-carboxylate (CAS: 877309-59-6) in a cool, dry p...

877309-59-6Methyl 1H-1,2,3-tria...
Compound Q&A

What regulatory guidelines apply to 6-Bromo[1,3]thiazolo[5,4-b]pyridin-2-amine (CAS: 1160791-13-8)?

6-Bromo[1,3]thiazolo[5,4-b]pyridin-2-amine (CAS: 1160791-13-8) is subject to the...

1160791-13-86-Bromo[1,3]thiazolo...
Compound Q&A

Is (2S,3S)-2-Ammonio-3-(3,4-dihydroxyphenyl)-3-hydroxypropanoate (CAS: 23651-95-8) safe?

(2S,3S)-2-Ammonio-3-(3,4-dihydroxyphenyl)-3-hydroxypropanoate (CAS: 23651-95-8) ...

23651-95-8(2S,3S)-2-Ammonio-3-...
Compound Q&A

What are the physical and chemical properties of 7-bromo-3-methyl-3,4-dihydroquinazolin-4-one (CAS: 1293987-84-4)?

7-Bromo-3-methyl-3,4-dihydroquinazolin-4-one is a solid with a crystalline form....

1293987-84-47-bromo-3-methyl-3,4...

Source Journal

Analyst

Analyst
CiteScore: 7.8
Self-citation Rate: 5.6%
Articles per Year: 653

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.