A mesoporous silica-supported CeO2/cellulose cathode catalyst for efficient bioelectrochemical reduction of inorganic carbon to biofuels

Literature Information

Publication Date 2021-07-21
DOI 10.1039/D1RE00166C
Impact Factor 4.239
Authors

Dayakar Thatikayala, Deepak Pant, Booki Min


View Original

Abstract

In this study, a novel efficient cathode electrode was fabricated to convert inorganic carbon to volatile fatty acids (VFAs) through microbial electrosynthesis (MES) in a single chamber reactor. The cathode catalyst was made up of mesoporous silica (mS) coated with cerium oxide (CeO2) and carbonized cellulose (C) in which mS acted as a core material and both CeO2 and C acted as a shell material. CeO2/C was loaded on the porous surface of mS, which acted as catalytic centers to enhance the biochemical reactions. The C/CeO2@mS composite catalyst coated on carbon cloth (Cc) was characterized by XRD and FESEM and showed high crystallinity and a porous core–shell morphology. The cyclic voltammetry analysis indicated that the cathode with C/CeO2@mS exhibited higher catalytic activity (−0.59 mA cm−2 (background current)) than the other controls (0.26 mA cm−2 for MES-C and −0.06 mA cm−2 for MES-mS). Three MES reactors with different cathodes were comparatively operated for the conversion of CO2 (8 g L−1 of HCO3−), and MES-C/CeO2@mS exhibited maximum acetate production (19.1 ± 0.95 mM) followed by MES-C (10.8 ± 0.51 mM) and MES-mS (9.5 ± 0.33 mM). The coulombic efficiency (CE%) in MES-C/CeO2@mS was 76%, and it was 42% and 34% for MES-mS and MES-C, respectively. The maximum current generation (0.48 ± 0.21 mA cm−2) was obtained with MES-C/CeO2@mS at a relatively higher cathode potential (−0.61 mV) as compared with the other cathodes. MES-C/CeO2@mS showed a lower Tafel slope of 220 mV dec−1, which was 2.71 times lower than that of abiotic MES-C/CeO2@mS (598 mV dec−1) suggesting enhanced electrokinetics with exoelectrogenic biofilm development on the cathode electrode. This study clearly demonstrates that the C/CeO2@mS catalyst can be successfully used for highly efficient bioelectrochemical conversion of CO2 to value added products via a MES route.

Related Literature

Thermal and photochemical oxidation of self-assembled monolayers on alumina particles exposed to nitrogen dioxide

Jonathan D. Raff, János Szanyi, Barbara J. Finlayson-Pitts

2010-11-01 Paper

DOI: 10.1039/C0CP01041C

Water-in-oil-in-water double nanoemulsion induced by CO2

Yueju Zhao, Jianling Zhang, Qian Wang, Jianshen Li, Buxing Han

2010-10-29 Paper

DOI: 10.1039/C0CP00869A

Coherent excitation phenomena in time-resolved experiments

A. Peralta Conde, R. Montero, A. Longarte, F. Castaño

2010-10-26 Paper

DOI: 10.1039/C0CP00805B

Electronic state spectroscopy of methyl formate probed by high resolution VUV photoabsorption, He(i)photoelectron spectroscopy and ab initio calculations

Y. Nunes, G. Martins, N. J. Mason, D. Duflot, S. V. Hoffmann, J. Delwiche, M.-J. Hubin-Franskin

2010-08-19 Paper

DOI: 10.1039/C0CP00051E

Quantum molecular dynamics and control

M. A. Robb

2010-11-22 Editorial

DOI: 10.1039/C0CP90134B

Interaction of water, hydrogen and their mixtures with SnO2 based materials: the role of surface hydroxyl groups in detection mechanisms

Roman G. Pavelko, Helen Daly, Christopher Hardacre, Alexey A. Vasiliev, Eduard Llobet

2010-01-27 Paper

DOI: 10.1039/B921665K

Incorporation of Pd into Au(111): enhanced electrocatalytic activity for the hydrogen evolution reaction

Peter J. Schäfer, Ludwig A. Kibler

2010-09-28 Paper

DOI: 10.1039/C0CP00780C

Tracking the formation of cobalt substituted ALPO-5 using simultaneous in situ X-ray diffraction and X-ray absorption spectroscopy techniques

Kerry Simmance, Gopinathan Sankar, Robert G. Bell, Carmelo Prestipino

2009-11-13 Communication

DOI: 10.1039/B920245E

Rational synthesis and characterization of porous Cu(ii) coordination polymers

Shin-ichiro Noro

2010-01-18 Perspective

DOI: 10.1039/B916584C

You might also like

Compound Q&A

What are the main uses of 4-Nitrophenyl phosphate disodium salt hexahydrate (CAS: 333338-18-4)?

4-Nitrophenyl phosphate disodium salt hexahydrate is primarily used as a substra...

333338-18-44-Nitrophenyl phosph...
Compound Q&A

What are the main uses of 2-(Trifluoromethyl)-1,3-oxazole-4-carboxylic Acid (CAS: 1060816-01-4)?

2-(Trifluoromethyl)-1,3-oxazole-4-carboxylic Acid (CAS: 1060816-01-4) is widely ...

1060816-01-42-(Trifluoromethyl)-...
Compound Q&A

How should 2-Fluoro-4-biphenylcarboxylic acid (CAS: 137045-30-8) be stored?

2-Fluoro-4-biphenylcarboxylic acid should be stored in a cool, dry place at room...

137045-30-82-Fluoro-4-biphenylc...
Compound Q&A

What industries use Prednisolone-21-Carboxylic Acid (CAS: 61549-70-0)?

Prednisolone-21-Carboxylic Acid is primarily used in the pharmaceutical industry...

61549-70-0Prednisolone-21-Carb...
Compound Q&A

How should 4-(Hydrazinomethyl)-1,2,3-benzenetriol (CAS: 3614-72-0) be stored?

4-(Hydrazinomethyl)-1,2,3-benzenetriol (CAS: 3614-72-0) should be stored in a co...

3614-72-04-(Hydrazinomethyl)-...
Compound Q&A

What industries use 4-Amino-1-methyl-1H-pyrazole-5-carboxylic acid hydrochloride (CAS: 92534-70-8)?

4-Amino-1-methyl-1H-pyrazole-5-carboxylic acid hydrochloride (CAS: 92534-70-8) i...

92534-70-84-Amino-1-methyl-1H-...
Compound Q&A

What regulatory guidelines apply to dehydropachymic acid (CAS: 77012-31-8)?

Dehydropachymic acid (CAS: 77012-31-8) is regulated by various agencies. It fall...

77012-31-8Dehydropachymic acid
Compound Q&A

What is the market or research trend for 6-[(2,2-Dimethylpropanoyl)amino]nicotinic acid (CAS: 898561-66-5)?

The market and research trends for 6-[(2,2-Dimethylpropanoyl)amino]nicotinic aci...

898561-66-56-[(2,2-Dimethylprop...
Compound Q&A

How should 1,10-Phenanthroline-2,9-dicarbaldehyde (CAS: 57709-62-3) be stored?

1,10-Phenanthroline-2,9-dicarbaldehyde should be stored in a cool, dry place awa...

57709-62-31,10-Phenanthroline-...
Compound Q&A

How is 5-Carbamoyl-11-oxo-10,11-dihydro-5H-dibenzo[b,f]azepin-10-yl acetate (CAS: 113952-21-9) typically synthesized?

5-Carbamoyl-11-oxo-10,11-dihydro-5H-dibenzo[b,f]azepin-10-yl acetate can be synt...

113952-21-95-Carbamoyl-11-oxo-1...

Source Journal

Reaction Chemistry & Engineering

Reaction Chemistry & Engineering
CiteScore: 0
Self-citation Rate: 8.8%
Articles per Year: 284

Reaction Chemistry & Engineering is an interdisciplinary journal reporting cutting-edge research focused on enhancing the understanding and efficiency of reactions. Reaction engineering leverages the interface where fundamental molecular chemistry meets chemical engineering and technology. Challenges in chemistry can be overcome by the application of new technologies, while engineers may find improved solutions for process development from the latest developments in reaction chemistry. Reaction Chemistry & Engineering is a unique forum for researchers whose interests span the broad areas of chemical engineering and chemical sciences to come together in solving problems of importance to wider society. All papers should be written to be approachable by readers across the engineering and chemical sciences. Papers that consider multiple scales, from the laboratory up to and including plant scale, are particularly encouraged.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.