Interaction of water, hydrogen and their mixtures with SnO2 based materials: the role of surface hydroxyl groups in detection mechanisms

Literature Information

Publication Date 2010-01-27
DOI 10.1039/B921665K
Impact Factor 3.676
Authors

Roman G. Pavelko, Helen Daly, Christopher Hardacre, Alexey A. Vasiliev, Eduard Llobet


View Original

Abstract

DRIFTS, TGA and resistance measurements have been used to study the mechanism of water and hydrogen interaction accompanied by a resistance change (sensor signal) of blank and Pd doped SnO2. It was found that a highly hydroxylated surface of blank SnO2 reacts with gases through bridging hydroxyl groups, whereas the Pd doped materials interact with hydrogen and water through bridging oxygen. In the case of blank SnO2 the sensor signal maximum towards H2 in dry air (R0/Rg) is observed at ∼345 °C, and towards water, at ∼180 °C, which results in high selectivity to hydrogen in the presence of water vapors (minor humidity effect). In contrast, on doping with Pd the response to hydrogen in dry air and to water occurred in the same temperature region (ca. 140 °C) leading to low selectivity with a high effect of humidity. An increase in water concentration in the gas phase changes the hydrogen interaction mechanism of Pd doped materials, while that of blank SnO2 is unchanged. The interaction of hydrogen with the catalyst doped SnO2 occurs predominantly through hydroxyl groups when the volumetric concentration of water in the gas phase is higher than that of H2 by a factor of 1000.

You might also like

Compound Q&A

What are the main uses of 4-Nitrophenyl phosphate disodium salt hexahydrate (CAS: 333338-18-4)?

4-Nitrophenyl phosphate disodium salt hexahydrate is primarily used as a substra...

333338-18-44-Nitrophenyl phosph...
Compound Q&A

What are the main uses of 2-(Trifluoromethyl)-1,3-oxazole-4-carboxylic Acid (CAS: 1060816-01-4)?

2-(Trifluoromethyl)-1,3-oxazole-4-carboxylic Acid (CAS: 1060816-01-4) is widely ...

1060816-01-42-(Trifluoromethyl)-...
Compound Q&A

How should 2-Fluoro-4-biphenylcarboxylic acid (CAS: 137045-30-8) be stored?

2-Fluoro-4-biphenylcarboxylic acid should be stored in a cool, dry place at room...

137045-30-82-Fluoro-4-biphenylc...
Compound Q&A

What industries use Prednisolone-21-Carboxylic Acid (CAS: 61549-70-0)?

Prednisolone-21-Carboxylic Acid is primarily used in the pharmaceutical industry...

61549-70-0Prednisolone-21-Carb...
Compound Q&A

How should 4-(Hydrazinomethyl)-1,2,3-benzenetriol (CAS: 3614-72-0) be stored?

4-(Hydrazinomethyl)-1,2,3-benzenetriol (CAS: 3614-72-0) should be stored in a co...

3614-72-04-(Hydrazinomethyl)-...
Compound Q&A

What industries use 4-Amino-1-methyl-1H-pyrazole-5-carboxylic acid hydrochloride (CAS: 92534-70-8)?

4-Amino-1-methyl-1H-pyrazole-5-carboxylic acid hydrochloride (CAS: 92534-70-8) i...

92534-70-84-Amino-1-methyl-1H-...
Compound Q&A

What regulatory guidelines apply to dehydropachymic acid (CAS: 77012-31-8)?

Dehydropachymic acid (CAS: 77012-31-8) is regulated by various agencies. It fall...

77012-31-8Dehydropachymic acid
Compound Q&A

What is the market or research trend for 6-[(2,2-Dimethylpropanoyl)amino]nicotinic acid (CAS: 898561-66-5)?

The market and research trends for 6-[(2,2-Dimethylpropanoyl)amino]nicotinic aci...

898561-66-56-[(2,2-Dimethylprop...
Compound Q&A

How should 1,10-Phenanthroline-2,9-dicarbaldehyde (CAS: 57709-62-3) be stored?

1,10-Phenanthroline-2,9-dicarbaldehyde should be stored in a cool, dry place awa...

57709-62-31,10-Phenanthroline-...
Compound Q&A

How is 5-Carbamoyl-11-oxo-10,11-dihydro-5H-dibenzo[b,f]azepin-10-yl acetate (CAS: 113952-21-9) typically synthesized?

5-Carbamoyl-11-oxo-10,11-dihydro-5H-dibenzo[b,f]azepin-10-yl acetate can be synt...

113952-21-95-Carbamoyl-11-oxo-1...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.