Quantum-state-dependent decay rates of electrostatically trapped Rydberg NO molecules

Literature Information

Publication Date 2021-07-22
DOI 10.1039/D1CP01930A
Impact Factor 3.676
Authors

M. H. Rayment, S. D. Hogan


View Original

Abstract

Nitric oxide (NO) molecules travelling in pulsed supersonic beams have been prepared in long-lived Rydberg–Stark states by resonance-enhanced two-colour two-photon excitation from the X 2Π1/2 (v′′ = 0, J′′ = 3/2) ground state, through the A 2Σ+ (v′ = 0, N′ = 0, J′ = 1/2) intermediate state. These excited molecules were decelerated from 795 ms−1 to rest in the laboratory-fixed frame of reference, in the travelling electric traps of a transmission-line Rydberg–Stark decelerator. The decelerator was operated at 30 K to minimise effects of blackbody radiation on the molecules during deceleration and trapping. The molecules were electrostatically trapped for times of up to 1 ms, and detected in situ by pulsed electric field ionisation. Measurements of the rate of decay from the trap were performed for states with principal quantum numbers between n = 32 and 50, in Rydberg series converging to the N+= 0, 1, and 2 rotational states of NO+. For the range of Rydberg states studied, the measured decay times of between 200 μs and 400 μs were generally observed to reduce as the value of n was increased. For some particular values of n deviations from this trend were seen. These observations are interpreted, with the aid of numerical calculations, to arise as a result of contributions to the decay rates, on the order of 1 kHz, from rotational and vibrational channel interactions. These results shed new light on the role of weak intramolecular interactions on the slow decay of long-lived Rydberg states in NO.

Related Literature

Density functional calculations of the electronic structure of 3-phenylamino-4-phenyl-1,2,4-triazole-5-thione

Ali Hussain Reshak, Dalibor Stys, S. Auluck, I. V. Kityk

2010-02-03 Paper

DOI: 10.1039/B920743K

Computational identification of a metal organic framework for high selectivity membrane-based CO2/CH4 separations: Cu(hfipbb)(H2hfipbb)0.5

Taku Watanabe, Seda Keskin, Sankar Nair, David S. Sholl

2009-10-29 Communication

DOI: 10.1039/B918254N

Spectroscopic characterization of Fe-doped synthetic chrysotile by EPR, DRS and magnetic susceptibility measurements

Elena Borghi, Manlio Occhiuzzi, Elisabetta Foresti, Isidoro Giorgio Lesci, Norberto Roveri

2009-11-09 Paper

DOI: 10.1039/B915182F

Novel percolation phenomena and mechanism of strengthening elastomers by nanofillers

Zhenhua Wang, Sizhu Wu, Wenchuan Wang

2010-02-09 Paper

DOI: 10.1039/B919789C

Manipulation and characterisation of accumulation and coarse mode aerosol particles using a Bessel beam trap

Helena Meresman, Jon B. Wills, Michael Summers, David McGloin, Jonathan P. Reid

2009-11-05 Paper

DOI: 10.1039/B914165K

Band gap engineering of ZnOvia doping with manganese: effect of Mn clustering

Hilkka Saal, Thomas Bredow, Michael Binnewies

2009-03-26 Paper

DOI: 10.1039/B901596E

On the conduction pathway for protons in nanocrystalline yttria-stabilized zirconia

Sangtae Kim, Hugo J. Avila-Paredes, Shizhong Wang, Chien-Ting Chen, Roger A. De Souza, Manfred Martin, Zuhair A. Munir

2009-03-02 Communication

DOI: 10.1039/B901623F

Poly(p-phenylene sulfone)s with high ion exchange capacity: ionomers with unique microstructural and transport features

C. C. de Araujo, M. Schuster, G. Portale, H. Mendil-Jakani, G. Gebel, J. Maier

2009-03-03 Paper

DOI: 10.1039/B822069G

Contents

Front/Back Matter

DOI: 10.1039/B906547B

You might also like

Compound Q&A

What precautions should be taken when handling 2-Chloro-1,2-bis(4-methylphenyl)ethanone (CAS: 71193-32-3)?

When handling 2-Chloro-1,2-bis(4-methylphenyl)ethanone (CAS: 71193-32-3), it is ...

71193-32-32-Chloro-1,2-bis(4-m...
Compound Q&A

What industries use 4-Ethoxy-3-(5-methyl-4-oxo-7-propyl-1,4-dihydroimidazo[5,1-f][1,2,4]triazin-2-yl)benzenesulfonyl chloride (CAS: 224789-26-8)?

4-Ethoxy-3-(5-methyl-4-oxo-7-propyl-1,4-dihydroimidazo[5,1-f][1,2,4]triazin-2-yl...

224789-26-84-Ethoxy-3-(5-methyl...
Compound Q&A

How should Methyl 3-Oxo-4-Androsten-17-Carboxylate (CAS: 2681-55-2) be stored?

Methyl 3-Oxo-4-Androsten-17-Carboxylate (CAS: 2681-55-2) should be stored in a c...

2681-55-2Methyl 3-Oxo-4-Andro...
Compound Q&A

What are the main uses of (R)-3-Amino-4-(3-hexylphenylamino)-4-oxobutylphosphonic acid (CAS: 909725-61-7)?

(R)-3-Amino-4-(3-hexylphenylamino)-4-oxobutylphosphonic acid is primarily used i...

909725-61-7(R)-3-Amino-4-(3-hex...
Compound Q&A

What regulatory guidelines apply to 2-Methyl-2-propanyl 3-amino-3-carbamoyl-1-azetidinecarboxylate (CAS: 1254120-14-3)?

2-Methyl-2-propanyl 3-amino-3-carbamoyl-1-azetidinecarboxylate (CAS: 1254120-14-...

1254120-14-32-Methyl-2-propanyl ...
Compound Q&A

Are there alternatives to (E)-4-(tert-Butoxy)-4-oxobut-2-enoic acid (CAS: 135355-96-3) in synthesis?

There are alternative reagents that can be used in synthesis instead of (E)-4-(t...

135355-96-3(E)-4-(tert-Butoxy)-...
Compound Q&A

What are the physical and chemical properties of [2-(3-Chlorophenyl)-1,3-thiazol-4-yl]methanol (CAS: 121202-20-8)?

[2-(3-Chlorophenyl)-1,3-thiazol-4-yl]methanol (CAS: 121202-20-8) is a crystallin...

121202-20-8[2-(3-Chlorophenyl)-...
166249-17-8Methyl (2S)-[(4S)-2,...
Compound Q&A

What is the market or research trend for 1-Bromo-2-isocyanatoethane (CAS: 42865-19-0)?

The market for 1-Bromo-2-isocyanatoethane (CAS: 42865-19-0) is driven by its use...

42865-19-01-Bromo-2-isocyanato...
Compound Q&A

What are the main uses of 4-Nitro-D-phenylalanine hydrochloride (CAS: 147065-06-3)?

4-Nitro-D-phenylalanine hydrochloride (CAS: 147065-06-3) is primarily used in re...

147065-06-34-Nitro-D-phenylalan...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.