Dynamic covalent exchange in poly(thioether anhydrides)
Literature Information
Kelly R. Tillman, Rebecca Meacham, Anne N. Rolsma, Mikenzie Barankovich, Ana M. Witkowski, Patrick T. Mather, Tyler Graf, Devon A. Shipp
Dynamic covalent exchange (DCE) of anhydride moieties is examined in both model compounds and network polymers. In addition, the polyanhydrides are shown to be capable of self-healing and recycling. Specifically, thermodynamic and kinetic analysis of the exchange process in symmetric model compounds methacrylic anhydride and 4-pentenoic anhydride, which produce an asymmetric anhydride upon exchange, was undertaken using 13C NMR spectroscopy. The equilibrium constant (Keq) was determined to be approximately 2–3, and the activation energy (Ea) for the production of the asymmetric anhydride was 178 kJ mol−1. The rate of exchange was shown to be increased catalytically in the presence of carboxylic acid. Poly(thioether anhydrides) were made using 4-pentenoic anhydride and mixtures of dithiol (1,6-hexanedithiol) and tetrathiol (pentaerythritol tetrakis(3-mercaptopropionate)) via radical-mediated thiol–ene polymerizations, and network relaxation rates studied using dynamic mechanical analysis. The activation energy and stress relaxation times for various polymer compositions were correlated to crosslink density and polymer composition. It was determined that cross-link density of the polymer system does not significantly impact Ea; however, relaxation time (τ) nearly quadrupled from the least cross-linked system to the most cross-linked system. The network polymers exhibited self-healing and facile recycling behavior, which we attributed to the anhydride DCE process that occurs readily in these materials at elevated temperatures. Using the composition with the fastest relaxation, we observed complete visible recovery of damage (notch) within a 4 hours duration at 90 °C. Recycling under compression molding for 15 minutes using 76 MPa hydrostatic pressure at 90 °C was successful. Both healed and recycled samples were successful in recovering or surpassing their original mechanical properties.
Related Literature
DNA triplex structure, thermodynamics, and destabilisation: insight from molecular simulations
Belinda J. Boehm, Charles Whidborne, Alexander L. Button, Tara L. Pukala, David M. Huang
DOI: 10.1039/C8CP02385A
Isomeric organic semiconductors containing fused-thiophene cores: molecular packing and charge transport
Pei Zhou, Yong Wu, Yanzi Xu, Ying Zhi
DOI: 10.1039/C7CP08567B
Antagonistic effects of natural osmolyte mixtures and hydrostatic pressure on the conformational dynamics of a DNA hairpin probed at the single-molecule level
Satyajit Patra, Christian Anders, Paul Hendrik Schummel, Roland Winter
DOI: 10.1039/C8CP00907D
Phenyl radical + propene: a prototypical reaction surface for aromatic-catalyzed 1,2-hydrogen-migration and subsequent resonance-stabilized radical formation
Zachary J. Buras, Te-Chun Chu, Adeel Jamal, Nathan W. Yee, Joshua E. Middaugh, William H. Green
DOI: 10.1039/C8CP01159A
Substituent control of the ultrafast twisted intramolecular charge transfer rate in dimethylaminochalcone derivatives
DOI: 10.1039/C7CP08239H
Theoretical study on mesoscopic-size impurity effects in the charge separation process of organic photocells
Motomichi Tashiro, Takahito Nakajima
DOI: 10.1039/C7CP08125A
A first-principles study of hydrogen storage capacity based on Li–Na-decorated silicene
Zhe Sheng, Shujing Wu, Xianying Dai, Tianlong Zhao, Yue Hao
DOI: 10.1039/C8CP00722E
Magnetism of NaFePO4 and related polyanionic compounds
Oier Arcelus, Sergey Nikolaev, Javier Carrasco
DOI: 10.1039/C8CP01961D
Phenothiazine-based small-molecule organic solar cells with power conversion efficiency over 7% and open circuit voltage of about 1.0 V using solvent vapor annealing
Yogajivan Rout, Rajneesh Misra, Rahul Singhal, Subhayan Biswas, Ganesh D. Sharma
DOI: 10.1039/C7CP08308D
Solvation-controlled lithium-ion complexes in a nonflammable solvent containing ethylene carbonate: structural and electrochemical aspects
Michiru Sogawa, Hikaru Kawanoue, Yanko Marinov Todorov, Daisuke Hirayama, Hideyuki Mimura, Nobuko Yoshimoto, Masayuki Morita, Kenta Fujii
DOI: 10.1039/C7CP08511G
You might also like
What is 3-Fluoro-2-methylbenzylamine (CAS: 771573-36-5)?
3-Fluoro-2-methylbenzylamine is an organic compound with the CAS number 771573-3...
Is Tert-butyl 2-(oxetan-3-ylidene)acetate (CAS: 1207175-03-8) safe?
Tert-butyl 2-(oxetan-3-ylidene)acetate is considered safe for its intended uses ...
What precautions should be taken when handling 4-Acetyl-2-fluorobenzonitrile (CAS: 214760-18-6)?
Proper personal protective equipment (PPE) such as gloves, goggles, and a lab co...
How is 2-Ethyl-4-methyl-1,3-thiazole (CAS: 15679-12-6) typically synthesized?
2-Ethyl-4-methyl-1,3-thiazole is commonly synthesized via the reaction of thiour...
How should 5',5''-([2,2'-Bithiophene]-5,5'-diyl)bis(([1,1':3',1''-terphenyl]-4,4''-dicarboxylic acid)) (CAS: 1227780-71-3) be stored?
This compound should be stored in a cool, dry place away from direct sunlight an...
What regulatory guidelines apply to L-Lysine Acetate Salt (CAS: 52315-92-1)?
L-Lysine Acetate Salt (CAS: 52315-92-1) is subject to various regulatory guideli...
Is 6-Fluoro-3-hydroxy-2-pyrazinecarboxamide (CAS: 259793-96-9) safe?
6-Fluoro-3-hydroxy-2-pyrazinecarboxamide (CAS: 259793-96-9) is generally conside...
What are the physical and chemical properties of 1,1'-Sulfonylbis(1H-imidazole) (CAS: 7189-69-7)?
1,1'-Sulfonylbis(1H-imidazole) is a crystalline solid with a molecular weight of...
What industries use 4-methyl-7-nitro-1H-indole-3-carbonitrile (CAS: 289483-82-5)?
4-Methyl-7-nitro-1H-indole-3-carbonitrile (CAS: 289483-82-5) is primarily used i...
How should waste containing 5-Bromo-3-indolyl-beta-galactoside (CAS: 97753-82-7) be handled?
Waste containing 5-Bromo-3-indolyl-beta-galactoside (CAS: 97753-82-7) should be ...
Source Journal
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.











![(1R,3S,5R)-2-{[(2-Methyl-2-propanyl)oxy]carbonyl}-2-azabicyclo[3.1.0]hexane-3-carboxylic acid structure (1R,3S,5R)-2-{[(2-Methyl-2-propanyl)oxy]carbonyl}-2-azabicyclo[3.1.0]hexane-3-carboxylic acid structure](https://static.chemtradehub.com/structs/197/197142-34-0-6a44.webp)


