A comprehensive study of the thermal conductivity of the hard sphere fluid and solid by molecular dynamics simulation
Literature Information
Sławomir Pieprzyk, Arkadiusz C. Brańka, David M. Heyes, Marcus N. Bannerman
This work reports a new set of hard sphere (HS) thermal conductivity coefficient, λ, data obtained by Molecular Dynamics (MD) computer simulation, over a density range covering the dilute fluid to near the close-packed solid, and for a large number of particles (up to N = 13 1072) and long simulation times. The N-dependence of the thermal conductivity is shown to be proportional to N−2/3 to a good approximation over a wide range of system sizes, which enabled λ values in the thermodynamic limit to be predicted accurately. The fluid and solid λ can be represented well by the Enskog theory (ET) formula, λE, times a density-dependent correction term, which is close to unity for the fluid and practically constant for the solid. The convergence of the MD λ data back towards ET in the metastable fluid starts just above the freezing density. For the HS solid and dense fluid it was found that the thermal conductivity is nearly linear in pressure, as has been observed experimentally for a number of solids. Simple excess entropy scaling over the higher density fluid phase region was found, and Rosenfeld's exponential relationship can be fitted to the simulation data for the solid to a high degree of accuracy. The simulation analysis has revealed a number of new trends in the behaviour of the HS thermal conductivity which could be useful in building more accurate models for heat conduction in experimental systems.
Recommended Journals
Related Literature
Sulfonate compounds embraced from acid copper electroplating baths as innovative additives for alkaline Zn batteries
Katerina Bogomolov, Ekaterina Grishina
DOI: 10.1039/D3TA04612E
Defect engineering: the role of cationic vacancies in photocatalysis and electrocatalysis
Wenming Ding, Shengbo Yuan, Yang Yang, Xiaoman Li, Min Luo
DOI: 10.1039/D3TA04947G
An integrated-milliampere-level hydroelectric generator utilizing chemical-doped P-type and N-type graphites
Dunren He, Wanyi Nie, Huihui Huang
DOI: 10.1039/D3TA06080B
Multifunctional underwater superoleophobic cellulose-based composite aerogel with oil/water separation, dye adsorption, and antibacterial activities
Zhen Zhang, Linyan Zhao, Lin Cui, DongMei Li, Xing Tian, Zhiyong Liu, Shenglin Liu
DOI: 10.1039/D3NJ05042D
Radiolytic stability and effects on metal extraction of N,N,N′-trioctyldiglycolamide, an important TODGA degradation product
Iván Sánchez-García, Richard J. M. Egberink, Willem Verboom, Hitos Galán
DOI: 10.1039/D3NJ04265K
Mechanistic understanding of 3d-metal phthalocyanine catalysts: heterostructure regulation of dz2 orbitals for efficient CO2 reduction
Jiayong Xiao, Hao Dong, Hui Zhang, Haolan Yang, Ming Qiu, Ying Yu
DOI: 10.1039/D3TA05834D
Overall control of the quality consistency of Citri Retriculatae Pericapium by combining HPLC fingerprint, terahertz time-domain spectroscopy and chemometrics
Xinyi Wang, Jiajia Fan, Yong Guo, Lili Lan, Qian Li, Guoxiang Sun
DOI: 10.1039/D3NJ04725C
You might also like
How should waste containing N-Methoxy-N-methyl-1,3-thiazole-5-carboxamide (CAS: 898825-89-3) be handled?
Waste containing N-Methoxy-N-methyl-1,3-thiazole-5-carboxamide (CAS: 898825-89-3...
How should N-(4-Biphenylyl)dibenzo[b,d]furan-4-amine (CAS: 1318338-47-4) be stored?
N-(4-Biphenylyl)dibenzo[b,d]furan-4-amine should be stored in a tightly sealed c...
What is the market or research trend for 3-Acetamido-5-amino-2,4,6-triiodobenzoic acid (CAS: 1713-07-1)?
The market for 3-Acetamido-5-amino-2,4,6-triiodobenzoic acid (CAS: 1713-07-1) is...
How should Benzyl 2-O-acetyl-3,4,6-tri-O-benzyl-beta-D-galactopyranoside (CAS: 61820-03-9) be stored?
Benzyl 2-O-acetyl-3,4,6-tri-O-benzyl-beta-D-galactopyranoside (CAS: 61820-03-9) ...
What regulatory guidelines apply to 2-Ethylpiperazine dihydrochloride (CAS: 438050-52-3)?
2-Ethylpiperazine dihydrochloride (CAS: 438050-52-3) is regulated under the Glob...
What regulatory guidelines apply to 1,1'-[1,3-Phenylenebis(methylene)]bis(3-methyl-1H-pyrrole-2,5-dione) (CAS: 119462-56-5)?
1,1'-[1,3-Phenylenebis(methylene)]bis(3-methyl-1H-pyrrole-2,5-dione) (CAS: 11946...
Are there alternatives to 5-Fluoro-2-(1-pyrrolidinyl)pyridine (CAS: 1287217-79-1) in synthesis?
Several alternatives can be used in the synthesis of 5-Fluoro-2-(1-pyrrolidinyl)...
What precautions should be taken when handling 1-((2R,3R,4R,5R)-5-((bis(4-methoxyphenyl)(phenyl)methoxy)methyl)-4-hydroxy-3-methoxytetrahydrofuran-2-yl)-5-methylpyrimidine-2,4(1H,3H)-dione (CAS: 153631-19-7)?
Proper personal protective equipment (PPE) must be worn when handling this compo...
What precautions should be taken when handling 6-Bromoimidazo[1,2-a]pyridin-8-amine (CAS: 676371-00-9)?
When handling 6-Bromoimidazo[1,2-a]pyridin-8-amine, it is important to wear appr...
Are there alternatives to (2S,4R)-4-(4-Nitrobenzyl)pyrrolidine-2-carboxylic acid hydrochloride (CAS: 1049740-22-8) in synthesis?
Alternatives to (2S,4R)-4-(4-Nitrobenzyl)pyrrolidine-2-carboxylic acid hydrochlo...
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.














