Dissociative photodetachment dynamics of the oxalate monoanion

Literature Information

Publication Date 2019-12-20
DOI 10.1039/C9CP05338G
Impact Factor 3.676
Authors

J. A. Gibbard, E. Castracane, A. J. Shin, R. E. Continetti


View Original

Abstract

The dissociative photodetachment (DPD) dynamics of the oxalate monoanion are studied using photoelectron–photofragment coincidence (PPC) spectroscopy. Following photodetachment of C2O4H− at 4.66 eV HOCO + CO2 products are observed, indicating the facile decarboxylation of the radical driven by the thermodynamic stability of CO2. No evidence is seen for photodetachment to stable C2O4H or ionic photodissociation to produce HOCO−. Calculations indicate the stabilizing presence of an intramolecular hydrogen bond in the anion via the formation of a strained five-membered ring. No intramolecular hydrogen bond is predicted in the radical due to the lower charge density on the oxygen atom. The PPC spectrum is consistent with a single direct two-body DPD channel that results in fragments of similar mass and is characterized by a large kinetic energy release (KER) and a broad photoelectron spectrum. The large KER is indicative of substantial repulsion in the radical following photodetachment. The form of the photoelectron spectrum is dominated by the bound to continuum Franck–Condon factors (BCFCF) and is suggestive of photodetachment to a repulsive potential energy surface. A lower bound for the electron affinity of C2O4H is reported as 4 eV. BCFCF calculations allow an approximate functional form of the repulsive surface along the C–C stretch coordinate to be extracted from the experimental photoelectron spectrum. PPC spectroscopy of the deuterated analogue (C2O4D−), at higher anion beam energies is used to increase the detectability of any possible D atom products, but none are observed.

Related Literature

Heterotellurium-containing macrocycles towards degradable tellurium-functionalized polymers

Jieni Hu, Chuanhao Sun, Siqi Li, Yuan Yuan

2021-07-20 Communication

DOI: 10.1039/D1PY00703C

Back cover

2021-06-22 Cover

DOI: 10.1039/D1PY90087K

IrAAC-based construction of dual sequence-defined polytriazoles

Xiaojun Wang, Xueyan Zhang, Yong Wang, Shengtao Ding

2021-06-21 Paper

DOI: 10.1039/D1PY00718A

From 0-dimension to 1-dimensions: Au nanocrystals as versatile plasmonic photocatalyst for broadband light induced RAFT polymerization

Junle Zhang, Mengya Li, Yanjie He, Xiaomeng Zhang, Zhe Cui, Peng Fu, Minying Liu, Xiaoguang Qiao, Qingxiang Zhao, Xinchang Pang

2021-03-25 Paper

DOI: 10.1039/D1PY00088H

Mediating covalent crosslinking of single-chain nanoparticles through solvophobicity in organic solvents

Georg M. Scheutz, Justine Elgoyhen, Kyle C. Bentz, Hao Sun, Junpeng Zhao, Daniel A. Savin, Brent S. Sumerlin

2021-07-27 Communication

DOI: 10.1039/D1PY00780G

Front cover

2021-06-29 Cover

DOI: 10.1039/D1PY90088A

Synthesis of fully degradable cationic polymers with various topological structures via postpolymerization modification by using thio-bromo “click” reaction

Yunkai Dai, Zhitao Hu, Xiaoying Wang, Xingliang Liu, Yuanchao Li, Yi Shi, Yongming Chen

2021-04-05 Paper

DOI: 10.1039/D1PY00106J

Polymers and boron neutron capture therapy (BNCT): a potent combination

Anaïs Pitto-Barry

2021-03-23 Review Article

DOI: 10.1039/D0PY01392G

Back cover

2021-04-13 Cover

DOI: 10.1039/D1PY90053F

You might also like

Compound Q&A

What precautions should be taken when handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3)?

When handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3), it ...

79206-94-34-(2-Furylmethyl)thi...
Compound Q&A

What precautions should be taken when handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9)?

When handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9), it...

71320-77-94-Chloro-N-[2-(4-mor...
Compound Q&A

How should waste containing 2-[2-(2-Methoxyethoxy)ethoxy]ethyl 4-methylbenzenesulfonate (CAS: 62921-74-8) be handled?

Waste containing this compound (CAS: 62921-74-8) should be handled according to ...

62921-74-82-[2-(2-Methoxyethox...
Compound Q&A

How should waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate be handled?

Waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate should be collected i...

40056-18-6(S)-Methyl 2-amino-3...
166882-70-85-({4-[(2S,4R)-4-Hyd...
Compound Q&A

Are there alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid (CAS: 7312-27-8) in synthesis?

There are several alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid in syn...

7312-27-8(2E)-3-(3,4-Dichloro...
Compound Q&A

How should Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84-9) be stored?

Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84...

925437-84-9Ethyl 6-(2-nitrophen...
Compound Q&A

How should waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) be handled?

Waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) should be coll...

18453-07-12-(1,3-Thiazol-2-yl)...
Compound Q&A

How is Methyl 5-iodo-2-methylbenzoate (CAS: 103440-54-6) typically synthesized?

Methyl 5-iodo-2-methylbenzoate can be synthesized through the iodination of meth...

103440-54-6Methyl 5-iodo-2-meth...
Compound Q&A

How is 5-Chloro[1,2,4]triazolo[1,5-a]pyridine (CAS: 1427399-34-5) typically synthesized?

5-Chloro[1,2,4]triazolo[1,5-a]pyridine is commonly synthesized via the condensat...

1427399-34-55-Chloro[1,2,4]triaz...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.