Mutual energy transfer luminescent properties in novel CsGd(MoO4)2:Yb3+,Er3+/Ho3+ phosphors for solid-state lighting and solar cells
Literature Information
Kai Li, Rik Van Deun
In this work, we prepared a novel kind of Yb3+,Er3+/Ho3+ co-doped CsGd(MoO4)2 phosphors with a different structure from the reported ALn(MoO4)2 (A = Li, Na or K; Ln = La, Gd or Y) compounds using a high-temperature solid-state reaction method. X-ray diffraction showed that the as-prepared samples had a pure phase. Based on the efficient energy transfer from Yb3+ to Er3+/Ho3+, the up-conversion (UC) luminescence of the optimal CsGd(MoO4)2:0.30Yb3+,0.02Er3+ sample showed intensely green light with dominant emission peaks at 528 and 550 nm corresponding to Er3+ transitions 2H11/2 → 4I15/2 and 4S3/2 → 4I15/2, respectively, as well as a weak emission peak originating from 4F9/2 → 4I15/2 at 671 nm, under 975 nm laser excitation. The CsGd(MoO4)2:Yb3+,Ho3+ samples mainly displayed two emission bands around 540 and 660 nm together with a negligible one at 755 nm, which corresponded to Ho3+ transitions 4F4,5F2 → 5I8, 5F5 → 5I8 and 4F4,5F2 → 5I7, respectively, under 975 nm laser excitation. With increasing Yb3+ concentration in CsGd(MoO4)2:Yb3+,Ho3+ phosphors, the emission color could be tuned from orange red to light yellow due to the large energy gap between levels 4F4,5F2 and 5F5. In addition, the CsGd(MoO4)2:Yb3+,Er3+ showed green light under 376 nm UV irradiation similar to that upon 975 nm laser excitation. However, the emissions for CsGd(MoO4)2:Yb3+,Ho3+ samples under 358 nm UV or 449 nm blue excitation showed dominant emission peaks at 540 nm and weak 660 nm and 752 nm peaks, which were a bit different from those under 975 nm excitation. Interestingly, we observed efficient energy transfer phenomena (possible quantum cutting) from Er3+/Ho3+ to Yb3+ and a Yb3+–O2− charge transfer (CT) transition in the molybdates, which was deduced from the visible and near-infrared emission spectra and the decrease of the Er3+/Ho3+ luminescent lifetimes with increasing Yb3+ concentration in the CsGd(MoO4)2:Yb3+,Er3+/Ho3+ samples. The luminescence properties of these phosphors suggest their potential possibility for applications in solid-state lighting and displays as well as in c-Si solar energy conversion systems.
Recommended Journals
Related Literature
Thiolate-bridged heterodinuclear platinum–zinc chelates as models for ternary platinum–DNA–protein complexes and zinc ejection from zinc fingers. Evidence from studies using ESI-mass spectrometry
Qin Liu, Melissa Golden, Marcetta Y. Darensbourg, Nicholas Farrell
DOI: 10.1039/B507751F
2-Phenallyl as a versatile protecting group for the asymmetric one-pot three-component synthesis of propargylamines
Nina Gommermann, Paul Knochel
DOI: 10.1039/B507810E
Preparation of biohybrid amphiphiles via the copper catalysed Huisgen [3 + 2] dipolar cycloaddition reaction
A. J. (Ton) Dirks, Sander S. van Berkel, Nikos S. Hatzakis, Joost A. Opsteen, Floris L. van Delft, Jeroen J. L. M. Cornelissen, Alan E. Rowan, Jan C. M. van Hest, Floris P. J. T. Rutjes, Roeland J. M. Nolte
DOI: 10.1039/B508428H
Solid-state 87Rb NMR signatures for rubidium cations bound to a G-quadruplex
Ramsey Ida, Gang Wu
DOI: 10.1039/B505674H
Demethylation of the [Me3Sn(PhN2O2)]4 tetramer into dimeric [Me2Sn(PhN2O2)2]2: a thermally induced methyl-transfer between supramolecules‡
Andrea Deák, Gábor Tárkányi
DOI: 10.1039/B506728F
New synthesis method for nickel phosphide hydrotreating catalysts
Shaofeng Yang, Roel Prins
DOI: 10.1039/B507940C
The vicinal F–C–C–F moiety as a tool for influencing peptide conformation
Martin Schüler, David O'Hagan, Alexandra M. Z. Slawin
DOI: 10.1039/B506010A
Injectable biodegradable hydrogels composed of hyaluronic acid–tyramine conjugates for drug delivery and tissue engineering
Motoichi Kurisawa, Joo Eun Chung, Yi Yan Yang, Shu Jun Gao, Hiroshi Uyama
DOI: 10.1039/B506989K
Chiral azide-bridged two-dimensional Cu(ii) compounds showing a field-induced spin–flop transition
Young Sin You, Jung Hee Yoon, Hyoung Chan Kim, Chang Seop Hong
DOI: 10.1039/B507051A
You might also like
How should waste containing N-Methoxy-N-methyl-1,3-thiazole-5-carboxamide (CAS: 898825-89-3) be handled?
Waste containing N-Methoxy-N-methyl-1,3-thiazole-5-carboxamide (CAS: 898825-89-3...
How should N-(4-Biphenylyl)dibenzo[b,d]furan-4-amine (CAS: 1318338-47-4) be stored?
N-(4-Biphenylyl)dibenzo[b,d]furan-4-amine should be stored in a tightly sealed c...
What is the market or research trend for 3-Acetamido-5-amino-2,4,6-triiodobenzoic acid (CAS: 1713-07-1)?
The market for 3-Acetamido-5-amino-2,4,6-triiodobenzoic acid (CAS: 1713-07-1) is...
How should Benzyl 2-O-acetyl-3,4,6-tri-O-benzyl-beta-D-galactopyranoside (CAS: 61820-03-9) be stored?
Benzyl 2-O-acetyl-3,4,6-tri-O-benzyl-beta-D-galactopyranoside (CAS: 61820-03-9) ...
What regulatory guidelines apply to 2-Ethylpiperazine dihydrochloride (CAS: 438050-52-3)?
2-Ethylpiperazine dihydrochloride (CAS: 438050-52-3) is regulated under the Glob...
What regulatory guidelines apply to 1,1'-[1,3-Phenylenebis(methylene)]bis(3-methyl-1H-pyrrole-2,5-dione) (CAS: 119462-56-5)?
1,1'-[1,3-Phenylenebis(methylene)]bis(3-methyl-1H-pyrrole-2,5-dione) (CAS: 11946...
Are there alternatives to 5-Fluoro-2-(1-pyrrolidinyl)pyridine (CAS: 1287217-79-1) in synthesis?
Several alternatives can be used in the synthesis of 5-Fluoro-2-(1-pyrrolidinyl)...
What precautions should be taken when handling 1-((2R,3R,4R,5R)-5-((bis(4-methoxyphenyl)(phenyl)methoxy)methyl)-4-hydroxy-3-methoxytetrahydrofuran-2-yl)-5-methylpyrimidine-2,4(1H,3H)-dione (CAS: 153631-19-7)?
Proper personal protective equipment (PPE) must be worn when handling this compo...
What precautions should be taken when handling 6-Bromoimidazo[1,2-a]pyridin-8-amine (CAS: 676371-00-9)?
When handling 6-Bromoimidazo[1,2-a]pyridin-8-amine, it is important to wear appr...
Are there alternatives to (2S,4R)-4-(4-Nitrobenzyl)pyrrolidine-2-carboxylic acid hydrochloride (CAS: 1049740-22-8) in synthesis?
Alternatives to (2S,4R)-4-(4-Nitrobenzyl)pyrrolidine-2-carboxylic acid hydrochlo...
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.












![tert-Butyl 6-chloro-4-oxospiro[chroman-2,4'-piperidine]-1'-carboxylate structure tert-Butyl 6-chloro-4-oxospiro[chroman-2,4'-piperidine]-1'-carboxylate structure](https://static.chemtradehub.com/structs/101/1011482-37-3-88a5.webp)

