Ethane diffusion in mixed linker zeolitic imidazolate framework-7-8 by pulsed field gradient NMR in combination with single crystal IR microscopy
Literature Information
Samuel Berens, Christian Chmelik, Febrian Hillman, Jörg Kärger, Hae-Kwon Jeong, Sergey Vasenkov
Pulsed field gradient (PFG) NMR was used in combination with single crystal IR microscopy (IRM) to study diffusion of ethane inside crystals of a mixed linker zeolitic imidazolate framework (ZIF) of the type ZIF-7-8 under comparable experimental conditions. These crystals contain 2-methylimidazolate (ZIF-8 linker) and benzimidazolate (ZIF-7 linker). It was observed that the PFG NMR attenuation curves measured for ethane in ZIF-7-8 exhibit deviations from the monoexponential behaviour, thereby indicating that the ethane self-diffusivity in different crystals of a crystal bed can be different. Measurements of the ethane uptake curves performed by IRM under the same conditions in different ZIF-7-8 crystals of the bed yield different transport diffusivities thus confirming that the rate of ethane diffusion is different in different ZIF-7-8 crystals. The IRM observation that the fractions of ZIF-8 and ZIF-7 linkers are different in different ZIF-7-8 crystals allowed attributing the observed heterogeneity in diffusivities to the heterogeneity in the linker fraction. The quantitative comparison of the average ethane self-diffusivities measured by PFG NMR in ZIF-7-8 with the corresponding data on corrected diffusivities from IRM measurements revealed a good agreement between the results obtained by the two techniques. In agreement with the expectation of smaller aperture sizes in ZIF-7-8 than in ZIF-8, the average ethane self-diffusivities in ZIF-7-8 were found to be significantly lower than the corresponding self-diffusivities in ZIF-8.
Recommended Journals

Medicinal Chemistry Research

Journal of Chemical Sciences

Bioorganic & Medicinal Chemistry Letters

Atomization and Sprays

Critical Reviews in Solid State and Materials Sciences

Journal of the Indian Institute of Science

Colloid Journal

Acta Metallurgica Sinica-English Letters

Herald of the Russian Academy of Sciences

Heteroatom Chemistry
Related Literature
Optimization and kinetics of crown ether-based hydroxyl-rich organic polymers for sustainable CO2 fixation and iodine vapor adsorption
Ningning Li, Yuhang Zhang, Xuanbo Liu, Xionglei Wang, Zheng Zhu, Balaji Panchal, Shenjun Qin
DOI: 10.1039/D3SE01298K
A minimal kinetic model for the interpretation of complex catalysis in single enzyme molecules
Prasanta Kundu, Soma Saha, Gautam Gangopadhyay
DOI: 10.1039/D3CP01720F
Auto-ignition and reaction kinetic characteristics of hydrogen-enriched n-dodecane mixtures under engine-like thermodynamic conditions
Zhen Gong, Yejian Qian
DOI: 10.1039/D3SE01012K
A self-phosphorized carbon-based monolithic chainmail electrode for high-current-density and durable alkaline water splitting
DOI: 10.1039/D3SE01486J
Machine-learning-assisted performance improvements for multi-resonance thermally activated delayed fluorescence molecules
Wanlin Cai, Cheng Zhong, Zi-Wei Ma, Zhuan-Yun Cai, Yue Qiu, Zubia Sajid, De-Yin Wu
DOI: 10.1039/D3CP04441F
Enhanced syngas selectivity and carbon utilization during chemical looping reforming of methane via a non-steady redox cycling strategy
Caroline M. Hill, Simon Ackermann, Kathryn G. Trimm, Dylan C. McCord, Philipp Furler, Jonathan R. Scheffe
DOI: 10.1039/D3SE01213A
AgInS2/CdSe type-II core/shell quantum dot-sensitized solar cells with an efficiency of 11.75% under 0.1 sun
Yu-Rou Wang, Jen-Bin Shi, Ming-Way Lee
DOI: 10.1039/D3SE01249B
Novel electrospun bead-like Ag2MoO4 nanofibers coated on Ni foam for visible light-driven heterogeneous photocatalysis and high-performance supercapacitor electrodes
Amirreza Safartoobi, Jamal Mazloom, Farhad Esmaeili Ghodsi
DOI: 10.1039/D3CP04751B
Self-assembly morphology transition mechanism of similar amphiphilic molecules
Guohui Li
DOI: 10.1039/D3CP04556K
Development of a QM/MM(ABEEM) method for the deprotonation of neutral and cation radicals in the G-tetrad and GGX(8-oxo-G) tetrad
Yue Wang, Linlin Liu, Yue Gao, Jiayue Zhao, Cui Liu, Lidong Gong, Zhongzhi Yang
DOI: 10.1039/D3CP04357F
You might also like
How should waste containing 4-Bromo-3-methyl-2-thiophenecarboxylic acid (CAS: 265652-39-9) be handled?
Waste containing 4-Bromo-3-methyl-2-thiophenecarboxylic acid (CAS: 265652-39-9) ...
What industries use (2S,5S,2'S,5'S)-1,1'-(1,2-Ethanediyl)bis(2,5-dimethylphospholane) (CAS: 136779-26-5)?
(2S,5S,2'S,5'S)-1,1'-(1,2-Ethanediyl)bis(2,5-dimethylphospholane) is primarily u...
What industries use Ethyl 2-(2-bromo-5-fluorophenyl)acetate (CAS: 1214910-61-8)?
Ethyl 2-(2-bromo-5-fluorophenyl)acetate (CAS: 1214910-61-8) is used in the pharm...
How is 4-Methyl-2-benzofuran-1,3-dione (CAS: 4792-30-7) typically synthesized?
4-Methyl-2-benzofuran-1,3-dione (CAS: 4792-30-7) can be synthesized through seve...
What industries use 4,6-Dichloroquinoline-3-carbonitrile (CAS: 936498-04-3)?
4,6-Dichloroquinoline-3-carbonitrile (CAS: 936498-04-3) is used in the pharmaceu...
What are the main uses of Chloro[tris(para-trifluoromethylphenyl)phosphine]gold(I) (CAS: 385815-83-8)?
Chloro[tris(para-trifluoromethylphenyl)phosphine]gold(I) is primarily used in or...
Is 2-Bromo-5-nitrofuran (CAS: 823-73-4) safe?
2-Bromo-5-nitrofuran (CAS: 823-73-4) is generally considered safe when handled w...
How should 5-Bromo-2,3,4-trifluorobenzoic acid (CAS: 212631-85-1) be stored?
5-Bromo-2,3,4-trifluorobenzoic acid should be stored in a cool, dry place away f...
What are the main uses of Zinc bis(aminoacetate) (CAS: 7214-08-6)?
Zinc bis(aminoacetate) (CAS: 7214-08-6) is primarily used in the pharmaceutical ...
How should Adamantan-1-ylmethanol (CAS: 770-71-8) be stored?
Adamantan-1-ylmethanol should be stored in a cool, dry, and well-ventilated plac...
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.


![2,5-Furandione, dihydro-3-[3-(triethoxysilyl)propyl]- structure 2,5-Furandione, dihydro-3-[3-(triethoxysilyl)propyl]- structure](https://static.chemtradehub.com/structs/936/93642-68-3-3b4b.webp)

