Reaction kinetics of OH + HNO3 under conditions relevant to the upper troposphere/lower stratosphere

Literature Information

Publication Date 2018-09-18
DOI 10.1039/C8CP04193H
Impact Factor 3.676
Authors

Frank A. F. Winiberg, Carl J. Percival, M. Anwar H. Khan, Dudley E. Shallcross, Yingdi Liu, Stanley P. Sander


View Original

Abstract

The OH initiated oxidation of HNO3 in the UT/LS plays an important role in controlling the O3 budget, removing HOx radicals whilst driving NOx/y partitioning chemistry by yielding NO3 radicals: OH + HNO3 → H2O + NO3. In this paper, k1(T, P) was measured using OH (A ← X) Laser Induced Fluorescence (LIF) and the data was modelled over the 223–298 K temperature and 25–750 Torr pressure ranges, using the modified Lindemann–Hinshelwood expression , where k0 = 5.2 × 10−14 exp(200/T) cm3 s−1, k2 = 8.4 × 10−17 exp(1900/T) cm3 s−1 and k3 = 1.6 × 10−34 exp(1745/T) cm3 s−1. A significant source of experimental uncertainty derives from accurate determination of HNO3 concentration, which is impacted by heterogeneous uptake of the low volatility HNO3 onto cold surfaces of the reactors. Our results represent the determination of k1(T, P) using two different in situ [HNO3] measurements: VUV absorption and a new two photon Photolysis Induced Fluoresence (PIF). Experimental results are discussed along with a computational master equation calculation (MESMER), which highlight the need for further theoretical study into the OH + HNO3 mechanism and potential energy surface. The atmospheric impact of these new rate constants were modelled using the STOCHEM-CRI chemistry transport global model, which have shown a small reduction in global budgets of key atmospheric species, with more significant changes in the NOx/HNO3 ratio, peaking in the tropical upper troposphere regions.

Related Literature

Development of a QM/MM(ABEEM) method for the deprotonation of neutral and cation radicals in the G-tetrad and GGX(8-oxo-G) tetrad

Yue Wang, Linlin Liu, Yue Gao, Jiayue Zhao, Cui Liu, Lidong Gong, Zhongzhi Yang

2023-11-28 Paper

DOI: 10.1039/D3CP04357F

Valorisation of residual biomass by pyrolysis: influence of process conditions on products

A. C. M. Vilas-Boas, L. A. C. Tarelho, H. S. M. Oliveira, F. G. C. S. Silva, D. T. Pio, M. A. A. Matos

2023-12-04 Paper

DOI: 10.1039/D3SE01216F

First-principles studies on the electronic and photocatalytic water splitting properties of surface functionalized Y2C-based MXenes

Sheng-Yi Zhang, Ni-Ping Shi, Chuan-Kui Wang, Guang-Ping Zhang

2023-11-29 Paper

DOI: 10.1039/D3CP04191C

Absorption and desorption behaviours of ammonia on bis(fluorosulfonyl)amide salts investigated using the pressure-swing method

Manabu Tokushige, Ryota Fujisawa, Junichi Ryu

2023-12-15 Paper

DOI: 10.1039/D3SE01350B

In situ-fabricated quasi-solid polymer electrolytes incorporating an ionic liquid for flexible supercapacitors

Hai Lu, Peichun Wang, Yitian Ma, Meng Liu, Linqing Chang, Rui Feng, Shuliang Luo, Zhiyun Zhang, Yi Wang, Yan Yuan

2023-12-18 Paper

DOI: 10.1039/D3SE01171B

An iron phosphate hydroxide hydrate electrocatalyst: synergistic effects of Fe2+ and Fe3+ for enhanced hydrogen evolution reaction stability

Jeygeerthika Reddy, Vivekanandan Raman, K. K. Viswanathan, Kandasamy Prabakar

2023-12-11 Paper

DOI: 10.1039/D3SE01488F

AgInS2/CdSe type-II core/shell quantum dot-sensitized solar cells with an efficiency of 11.75% under 0.1 sun

Yu-Rou Wang, Jen-Bin Shi, Ming-Way Lee

2023-11-27 Paper

DOI: 10.1039/D3SE01249B

Solvent-controlled synthesis of hydrophilic and hydrophobic carbon dots

Chenhan Zhang, Zhihua Ying, Yuan Jiang, Haiyang Wang, Xuebin Zhou, Weipeng Xuan, Peng Zheng

2023-12-08 Paper

DOI: 10.1039/D3CP04273A

In situ construction of heterostructured CuxO@NiCoS nanoarrays for alkaline overall water splitting

Chenyu Song, Jishuang Yang, Chinnadurai Ayappan, Haitang Yang, Ruimin Xing, Shanhu Liu

2023-12-02 Paper

DOI: 10.1039/D3SE01194A

You might also like

Compound Q&A

How should waste containing 4-Bromo-3-methyl-2-thiophenecarboxylic acid (CAS: 265652-39-9) be handled?

Waste containing 4-Bromo-3-methyl-2-thiophenecarboxylic acid (CAS: 265652-39-9) ...

265652-39-94-Bromo-3-methyl-2-t...
Compound Q&A

What industries use (2S,5S,2'S,5'S)-1,1'-(1,2-Ethanediyl)bis(2,5-dimethylphospholane) (CAS: 136779-26-5)?

(2S,5S,2'S,5'S)-1,1'-(1,2-Ethanediyl)bis(2,5-dimethylphospholane) is primarily u...

136779-26-5(2S,5S,2'S,5'S)-1,1'...
Compound Q&A

What industries use Ethyl 2-(2-bromo-5-fluorophenyl)acetate (CAS: 1214910-61-8)?

Ethyl 2-(2-bromo-5-fluorophenyl)acetate (CAS: 1214910-61-8) is used in the pharm...

1214910-61-8Ethyl 2-(2-bromo-5-f...
Compound Q&A

How is 4-Methyl-2-benzofuran-1,3-dione (CAS: 4792-30-7) typically synthesized?

4-Methyl-2-benzofuran-1,3-dione (CAS: 4792-30-7) can be synthesized through seve...

4792-30-74-Methyl-2-benzofura...
Compound Q&A

What industries use 4,6-Dichloroquinoline-3-carbonitrile (CAS: 936498-04-3)?

4,6-Dichloroquinoline-3-carbonitrile (CAS: 936498-04-3) is used in the pharmaceu...

936498-04-34,6-Dichloroquinolin...
Compound Q&A

What are the main uses of Chloro[tris(para-trifluoromethylphenyl)phosphine]gold(I) (CAS: 385815-83-8)?

Chloro[tris(para-trifluoromethylphenyl)phosphine]gold(I) is primarily used in or...

385815-83-8Chloro[tris(para-tri...
Compound Q&A

Is 2-Bromo-5-nitrofuran (CAS: 823-73-4) safe?

2-Bromo-5-nitrofuran (CAS: 823-73-4) is generally considered safe when handled w...

823-73-42-Bromo-5-nitrofuran
Compound Q&A

How should 5-Bromo-2,3,4-trifluorobenzoic acid (CAS: 212631-85-1) be stored?

5-Bromo-2,3,4-trifluorobenzoic acid should be stored in a cool, dry place away f...

212631-85-15-Bromo-2,3,4-triflu...
Compound Q&A

What are the main uses of Zinc bis(aminoacetate) (CAS: 7214-08-6)?

Zinc bis(aminoacetate) (CAS: 7214-08-6) is primarily used in the pharmaceutical ...

7214-08-6Zinc bis(aminoacetat...
Compound Q&A

How should Adamantan-1-ylmethanol (CAS: 770-71-8) be stored?

Adamantan-1-ylmethanol should be stored in a cool, dry, and well-ventilated plac...

770-71-8Adamantan-1-ylmethan...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.