A simple approach for the ultrasensitive detection of paraquat residue in adzuki beans by surface-enhanced Raman scattering

Literature Information

Publication Date 2018-12-20
DOI 10.1039/C8AN01845F
Impact Factor 4.616
Authors

Ching-Wei Yu, Wei-Chen Chuang, Ming-Jun Chen, Shao-Kai Lin, Tsyr-Horng Shyu, Yung-Hsiang Wang, Cheng-Chien Li, Wei-Chung Chao, Chun-Yu Chuang


View Original

Abstract

Paraquat (PQ), a broad-spectrum contact herbicide, has been used in many countries for controlling weed growth in agriculture because of its quick-acting and nonselective contact with green plant tissue. PQ is also toxic to humans, and even contributes to the development of neurodegenerative diseases. However, PQ is generally excluded from pesticide residue monitoring programs due to the lack of suitable determination methods. Thus, this study developed a detection method combined with simple extraction and surface-enhanced Raman spectroscopy (SERS) to rapidly determine and quantify the PQ residue on legumes without destructive procedures and high-cost instruments. Following the extraction procedure of the QuPPe-method, however, we took whole adzuki beans (Vigna angularis) extracted via a mixture of methanol and 1% formic acid at room temperature and followed by a 1 min cleanup by SPE. The PQ values for adzuki beans determined by LC/MSMS showed that regardless of whether extraction was followed by the QuPPe-method or the method we proposed, a consistent and low relative standard deviation (RSD) below <22% was found. In this study, we proposed to extract PQ on the surface of the beans by shaking briefly with solvent, and then the PQ molecules were detected and quantified by depositing Ag nanoparticles (AgNPs) and performing SERS within 10 min. Using a coating of deposited Ag nanoparticles, SERS can achieve a limit of detection (LOD) for PQ on the order of 1 μg L−1 (∼4 × 10−9 M) and a method detection limit (MDL) for adzuki beans of 0.8 μg kg−1 (∼3.3 × 10−9 M). This sensitivity at the ppb level absolutely met the maximum residue limit (MRL) for PQ in dried beans as declared by most countries, including the US (0.3 mg kg−1), Australia (1.0 mg kg−1) and Taiwan (0.2 mg kg−1). Taiwan will ban the use of PQ as a defoliating agent for harvest in adzuki bean fields in 2019; therefore, developing a method for detecting PQ residues in the field or in import markets is necessary for consumer health and for authorities. This study provided an opportunity to utilize SERS in the field of on-site pesticide residue screening.

Related Literature

Characterizing hydrogen and tetrel bonds in clusters of CO2 with carboxylic acids

Weixing Li, Sonia Melandri, Luca Evangelisti, Camilla Calabrese, Annalisa Vigorito, Assimo Maris

2021-07-24 Paper

DOI: 10.1039/D1CP02568F

An augmented (multi-descriptor) grouping algorithm to optimize chemical ordering in nanoalloys

Davide Fioravanti, Giovanni Barcaro, Alessandro Fortunelli

2021-09-21 Paper

DOI: 10.1039/D1CP03583E

A flat-lying dimer as a key intermediate in NO reduction on Cu(100)

Kenta Kuroishi, Thanh Ngoc Pham, Yuelin Wang, Yuji Hamamoto, Kouji Inagaki, Akitoshi Shiotari, Hiroshi Okuyama, Shinichiro Hatta, Tetsuya Aruga

2021-07-08 Paper

DOI: 10.1039/D1CP02746H

Contents list

2021-10-13 Front/Back Matter

DOI: 10.1039/D1CP90205A

Computational investigations of selected enzymes from two iron and α-ketoglutarate-dependent families

Madison B. Berger, Alice R. Walker, Erik Antonio Vázquez-Montelongo, G. Andrés Cisneros

2021-09-24 Perspective

DOI: 10.1039/D1CP03800A

Unravelling the nature of a toluene–fumaronitrile complex

Andrzej J. Kałka, Mateusz Z. Brela, Andrzej M. Turek

2021-07-03 Paper

DOI: 10.1039/D1CP01895G

Zn–Fe–oxide nanostructures of different iron concentrations for multifunctional applications: properties and precursor influence

V. Mihalache, C. Negrila, I. Mercioniu, N. Iacob, V. Kuncser

2021-07-23 Paper

DOI: 10.1039/D1CP01002F

Deformation mechanism of a metal–organic framework glass under indentation

Theany To, Malwina Stepniewska, Haizheng Tao, Laurent Calvez, Xianghua Zhang, Morten M. Smedskjaer, Yuanzheng Yue

2021-07-26 Paper

DOI: 10.1039/D1CP02213J

You might also like

Compound Q&A

How is Ethyl 4-chlorothieno[2,3-b]pyridine-5-carboxylate (CAS: 59713-58-5) typically synthesized?

Ethyl 4-chlorothieno[2,3-b]pyridine-5-carboxylate (CAS: 59713-58-5) can be synth...

59713-58-5Ethyl 4-chlorothieno...
Compound Q&A

What regulatory guidelines apply to 5-Methyl-1H-indole-3-carbaldehyde (CAS: 52562-50-2)?

5-Methyl-1H-indole-3-carbaldehyde (CAS: 52562-50-2) is subject to various regula...

52562-50-25-Methyl-1H-indole-3...
Compound Q&A

What are the physical and chemical properties of (1,3-Dimethyl-2,4-dioxo-1,2,3,4-tetrahydro-5-pyrimidinyl)boronic acid (CAS: 223418-73-3)?

(1,3-Dimethyl-2,4-dioxo-1,2,3,4-tetrahydro-5-pyrimidinyl)boronic acid is a white...

223418-73-3(1,3-Dimethyl-2,4-di...
Compound Q&A

How should waste containing Sulfocostunolide A (CAS: 1016983-51-9) be handled?

Waste containing Sulfocostunolide A (CAS: 1016983-51-9) should be handled with c...

1016983-51-9Sulfocostunolide A
Compound Q&A

What precautions should be taken when handling Murraxocin (CAS: 88478-44-8)?

When handling Murraxocin (CAS: 88478-44-8), ensure proper personal protective eq...

88478-44-8Murraxocin
Compound Q&A

What are the physical and chemical properties of Formvar (CAS: 63148-64-1)?

Formvar (CAS: 63148-64-1) is an alkyd resin characterized by a high molecular we...

63148-64-1Formvar(R)
Compound Q&A

Is (S)-4-benzyl-2-((benzyloxy)methyl)morpholine (CAS: 205242-66-6) safe?

(S)-4-benzyl-2-((benzyloxy)methyl)morpholine is generally safe when handled with...

205242-66-6(S)-4-benzyl-2-((ben...
Compound Q&A

What industries use Methyl 1-(5-bromo-2-pyrimidinyl)cyclopropanecarboxylate (CAS: 1447607-69-3)?

Methyl 1-(5-bromo-2-pyrimidinyl)cyclopropanecarboxylate (CAS: 1447607-69-3) is p...

1447607-69-3Methyl 1-(5-bromo-2-...
Compound Q&A

Is 2-Methyl-1-phenyl-1-propanamine hydrochloride (CAS: 24290-47-9) safe?

2-Methyl-1-phenyl-1-propanamine hydrochloride (CAS: 24290-47-9) is generally con...

24290-47-92-Methyl-1-phenyl-1-...
Compound Q&A

How is 3-(4-Bromophenyl)-2-methylpropanoic acid (CAS: 66735-01-1) typically synthesized?

3-(4-Bromophenyl)-2-methylpropanoic acid is synthesized through a multi-step pro...

66735-01-13-(4-Bromophenyl)-2-...

Source Journal

Analyst

Analyst
CiteScore: 7.8
Self-citation Rate: 5.6%
Articles per Year: 653

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.