In situ polymerization of supramolecular nanorods assembled from polymerizable perylene bisimide
Literature Information
Publication Date
2017-07-03
DOI
10.1039/C7PY00895C
Impact Factor
5.582
Authors
Zhibo Li
View Original
Abstract
A dimethacryl amide functionalized perylene bisimide monomer was synthesized. Such a polymerizable monomer can self-assemble into a one dimensional rod-like structure with a mean diameter of ca. 100 nm and a length of several micrometers. The preformed supramolecular assemblies were characterized by UV-Vis spectroscopy, TEM, FE-SEM, X-ray diffraction and differential scanning calorimetry. In situ free radical polymerization was then performed in the organized state to maintain the assembly structures, and the nanorods retained their original shapes after polymerization. A significant result is that the long-range π-electron delocalization enables enhancement of the electrical conductivity of these polymeric nanorods, which facilitates the construction of electronic devices.
Related Literature
An EPR/ENDOR study of the reduction products of symmetrical isomers of dipyridylacetylene
Paper
DOI: 10.1039/A902689D
Friction and adhesion of mixed self-assembled monolayers studied by chemical force microscopy
Paper
DOI: 10.1039/A809994D
Thermodynamic study of organic compounds in di-n-butyl ether. Enthalpy and Gibbs energy of solvation
Luca Bernazzani, Maria R. Carosi, Norberto Ceccanti, Giovanni Conti, Paolo Gianni, Vincenzo Mollica, Maria R. Tinè, Luciano Lepori, Enrico Matteoli
2000-10-16
Paper
DOI: 10.1039/B004804F
Spin–orbit branching in Cl(2P) atoms produced by ultraviolet photodissociation of HCl
Paper
DOI: 10.1039/A903331I
Temperature-dependent self-diffusion coefficients of water and six selected molecular liquids for calibration in accurate 1H NMRPFG measurements
Manfred Holz, Stefan R. Heil, Antonio Sacco
2000-10-03
Paper
DOI: 10.1039/B005319H
Interaction of methanol with lanthanum oxide surfaces and LaOx/Cu(111) interfaces. Part I. Adsorption and thermal decomposition
Alison M. De Asha, John T. S. Critchley, A. Elina Siokou, Roger M. Nix
2000-09-22
Paper
DOI: 10.1039/B005602M
Spectroscopic properties of Mg-chlorin, Mg-porphin and chlorophyllsa, b, c1, c2, c3 and d studied by semi-empirical and ab initio MO/CI methods
Juha Linnanto, Jouko Korppi-Tommola
2000-10-05
Paper
DOI: 10.1039/B004998K
You might also like
Compound Q&A
What precautions should be taken when handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3)?
When handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3), it ...
79206-94-34-(2-Furylmethyl)thi...
Compound Q&A
What precautions should be taken when handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9)?
When handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9), it...
71320-77-94-Chloro-N-[2-(4-mor...
Compound Q&A
How should waste containing 2-[2-(2-Methoxyethoxy)ethoxy]ethyl 4-methylbenzenesulfonate (CAS: 62921-74-8) be handled?
Waste containing this compound (CAS: 62921-74-8) should be handled according to ...
62921-74-82-[2-(2-Methoxyethox...
Compound Q&A
How should waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate be handled?
Waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate should be collected i...
40056-18-6(S)-Methyl 2-amino-3...
Compound Q&A
How is 5-({4-[(2S,4R)-4-Hydroxy-2-methyltetrahydro-2H-pyran-4-yl]-2-thienyl}sulfanyl)-1-methyl-1,3-dihydro-2H-indol-2-one (CAS: 166882-70-8) typically synthesized?
This compound can be synthesized using a multi-step process involving the conjug...
166882-70-85-({4-[(2S,4R)-4-Hyd...
Compound Q&A
Are there alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid (CAS: 7312-27-8) in synthesis?
There are several alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid in syn...
7312-27-8(2E)-3-(3,4-Dichloro...
Compound Q&A
How should Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84-9) be stored?
Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84...
925437-84-9Ethyl 6-(2-nitrophen...
Compound Q&A
How should waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) be handled?
Waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) should be coll...
18453-07-12-(1,3-Thiazol-2-yl)...
Compound Q&A
How is Methyl 5-iodo-2-methylbenzoate (CAS: 103440-54-6) typically synthesized?
Methyl 5-iodo-2-methylbenzoate can be synthesized through the iodination of meth...
103440-54-6Methyl 5-iodo-2-meth...
Compound Q&A
How is 5-Chloro[1,2,4]triazolo[1,5-a]pyridine (CAS: 1427399-34-5) typically synthesized?
5-Chloro[1,2,4]triazolo[1,5-a]pyridine is commonly synthesized via the condensat...
1427399-34-55-Chloro[1,2,4]triaz...
Source Journal
Polymer Chemistry
CiteScore:
8.6
Self-citation Rate:
7.3%
Articles per Year:
457
Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.
Recommended Compounds
![5-Acetyl-2,3-dihydrobenzo[b]furan structure](https://static.chemtradehub.com/structs/908/90843-31-5-eea4.webp "5-Acetyl-2,3-dihydrobenzo[b]furan structure")
Methyl 2-cyano-3,12-dioxooleana-1,9(11)-dien-28-oate
CAS Number:
218600-53-4
Molecular Formula:
C32H43NO4
Recommended Suppliers
Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.