The electronic properties of three popular high spin complexes [TM(acac)3, TM = Cr, Mn, and Fe] revisited: an experimental and theoretical study
Literature Information
S. Carlotto, L. Floreano, A. Cossaro, M. Rancan, M. Sambi
The occupied and unoccupied electronic structures of three high spin TM(acac)3 (TM = Cr, Mn, and Fe) complexes (I, II, and III, respectively) were studied by revisiting their literature vapour-phase He(I) and, when available, He(II) photoemission (PE) spectra and by means of original near-edge X-ray absorption fine structure (NEXAFS) spectroscopic data recorded at the O K-edge (OK-edge) and TM L2,3-edges (TML2,3-edges). The assignments of the vapour-phase He(I)/He(II) PE spectra were guided by the results of spin-unrestricted non-relativistic Slater transition state calculations, while the OK-edge and TML2,3-edge spectroscopic pieces of evidence were analysed by exploiting the results of spin-unrestricted scalar-relativistic time-dependent density functional theory (DFT) and DFT/ROCIS calculations, respectively. Although the actual symmetry (D3, in the absence of any Jahn–Teller distortion) of the title molecules allowed an extensive mixing between TM t2g-like and eg-like atomic orbitals, the use of the Nalewajski–Mrozek TM–O bond multiplicity index combined with a thorough analysis of the ground state (GS) outcomes allowed the assessment of the TM–O bond weakening associated with the progressive TM 3d-based eg-like orbital filling. The experimental information provided by OK-edge spectra was rather poor; nevertheless, the combined use of symmetry, orbitals and spectra allowed us (i) to rationalise minor differences characterizing spectral features along the series, (ii) to quantify the contribution provided by the ligand-to-metal-charge-transfer (LMCT) excitations to the different spectral features, and (iii) to recognize the t2g-/eg-like nature of the TM 3d-based orbitals involved in LMCT transitions. As far as the TML2,3-edge spectra and the DFT/ROCIS results were concerned, the lowest lying I,IIL3 spectral features included states having either the GS spin multiplicity (S(I) = 3/2, S(II) = 2) or, at higher excitation energies (EEs), states with ΔS = ±1. In contrast to that, only states with ΔS = 0, −1 significantly contributed to the IIIL3 spectral pattern. Along the whole series, the L3 higher EE side was systematically characterized by states involving TM2p → π4 MLCT excitations; as such, coupled-single excitations with ΔS = 0 were involved in I and II, while single MLCT TM2p → π4 transitions with ΔS = −1 were involved in III.
Related Literature
A facile strategy for manipulating micellar size and morphology through intramolecular cross-linking of amphiphilic block copolymers
Ryoto Tanaka, Kodai Watanabe, Takuya Yamamoto, Kenji Tajima, Takuya Isono, Toshifumi Satoh
DOI: 10.1039/C7PY00646B
Synthesis and characterization of bead-like poly(N-isopropylacrylamide) copolymers with double decker silsesquioxane in the main chains
Kun Wei, Lei Wang, Lei Li, Sixun Zheng
DOI: 10.1039/C4PY00786G
Shape memory polymer foams prepared from a heparin-inspired polyurethane/urea
Q. Chai, Y. Huang, T. L. Kirley, N. Ayres
DOI: 10.1039/C7PY00204A
A facile route to well-defined imidazolium-based poly(ionic liquid)s of enhanced conductivity via RAFT
Karol Erfurt, Anna Chrobok, Andrzej Zięba
DOI: 10.1039/C7PY01046J
One-pot preparation of BAB triblock copolymer nano-objects through bifunctional macromolecular RAFT agent mediated dispersion polymerization
Yaqing Qu, Shuang Wang, Habib Khan, Chengqiang Gao, Heng Zhou
DOI: 10.1039/C5PY01917F
Injectable cationic hydrogels with high antibacterial activity and low toxicity
Hong Du, Xuxia Yao, Xiaodong Li, Zhiquan Shen
DOI: 10.1039/C6PY01346E
You might also like
What are the main uses of 4-Nitrophenyl phosphate disodium salt hexahydrate (CAS: 333338-18-4)?
4-Nitrophenyl phosphate disodium salt hexahydrate is primarily used as a substra...
What are the main uses of 2-(Trifluoromethyl)-1,3-oxazole-4-carboxylic Acid (CAS: 1060816-01-4)?
2-(Trifluoromethyl)-1,3-oxazole-4-carboxylic Acid (CAS: 1060816-01-4) is widely ...
How should 2-Fluoro-4-biphenylcarboxylic acid (CAS: 137045-30-8) be stored?
2-Fluoro-4-biphenylcarboxylic acid should be stored in a cool, dry place at room...
What industries use Prednisolone-21-Carboxylic Acid (CAS: 61549-70-0)?
Prednisolone-21-Carboxylic Acid is primarily used in the pharmaceutical industry...
How should 4-(Hydrazinomethyl)-1,2,3-benzenetriol (CAS: 3614-72-0) be stored?
4-(Hydrazinomethyl)-1,2,3-benzenetriol (CAS: 3614-72-0) should be stored in a co...
What industries use 4-Amino-1-methyl-1H-pyrazole-5-carboxylic acid hydrochloride (CAS: 92534-70-8)?
4-Amino-1-methyl-1H-pyrazole-5-carboxylic acid hydrochloride (CAS: 92534-70-8) i...
What regulatory guidelines apply to dehydropachymic acid (CAS: 77012-31-8)?
Dehydropachymic acid (CAS: 77012-31-8) is regulated by various agencies. It fall...
What is the market or research trend for 6-[(2,2-Dimethylpropanoyl)amino]nicotinic acid (CAS: 898561-66-5)?
The market and research trends for 6-[(2,2-Dimethylpropanoyl)amino]nicotinic aci...
How should 1,10-Phenanthroline-2,9-dicarbaldehyde (CAS: 57709-62-3) be stored?
1,10-Phenanthroline-2,9-dicarbaldehyde should be stored in a cool, dry place awa...
How is 5-Carbamoyl-11-oxo-10,11-dihydro-5H-dibenzo[b,f]azepin-10-yl acetate (CAS: 113952-21-9) typically synthesized?
5-Carbamoyl-11-oxo-10,11-dihydro-5H-dibenzo[b,f]azepin-10-yl acetate can be synt...
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.














![N-[2-(4-Hydroxyphenoxy)-4-nitrophenyl]methanesulfonamide structure N-[2-(4-Hydroxyphenoxy)-4-nitrophenyl]methanesulfonamide structure](https://static.chemtradehub.com/structs/109/109032-22-6-7c88.webp)