Enhancing the resolution of 1H and 13C solid-state NMR spectra by reduction of anisotropic bulk magnetic susceptibility broadening

Literature Information

Publication Date 2017-09-25
DOI 10.1039/C7CP04223J
Impact Factor 3.676
Authors

Julie L. Calahan, Joseph W. Lubach, Eric J. Munson


View Original

Abstract

We demonstrate that natural isotopic abundance 2D heteronuclear correlation (HETCOR) solid-state NMR spectra can be used to significantly reduce or eliminate the broadening of 1H and 13C solid-state NMR spectra of organic solids due to anisotropic bulk magnetic susceptibility (ABMS). ABMS often manifests in solids with aromatic groups, such as active pharmaceutical ingredients (APIs), and inhomogeneously broadens the NMR peaks of all nuclei in the sample. Inhomogeneous peaks with full widths at half maximum (FWHM) of ∼1 ppm typically result from ABMS broadening and the low spectral resolution impedes the analysis of solid-state NMR spectra. ABMS broadening of solid-state NMR spectra has previously been eliminated using 2D multiple-quantum correlation experiments, or by performing NMR experiments on diluted materials or single crystals. However, these experiments are often infeasible due to their poor sensitivity and/or provide limited gains in resolution. 2D 1H–13C HETCOR experiments have previously been applied to reduce susceptibility broadening in paramagnetic solids and we show that this strategy can significantly reduce ABMS broadening in diamagnetic organic solids. Comparisons of 1D solid-state NMR spectra and 1H and 13C solid-state NMR spectra obtained from 2D 1H–13C HETCOR NMR spectra show that the HETCOR spectrum directly increases resolution by a factor of 1.5 to 8. The direct gain in resolution is determined by the ratio of the inhomogeneous 13C/1H linewidth to the homogeneous 1H linewidth, with the former depending on the magnitude of the ABMS broadening and the strength of the applied field and the latter on the efficiency of homonuclear decoupling. The direct gains in resolution obtained using the 2D HETCOR experiments are better than that obtained by dilution. For solids with long proton longitudinal relaxation times, dynamic nuclear polarization (DNP) was applied to enhance sensitivity and enable the acquisition of 2D 1H–13C HETCOR NMR spectra. 2D 1H–13C HETCOR experiments were applied to resolve and partially assign the NMR signals of the form I and form II polymorphs of aspirin in a sample containing both forms. These findings have important implications for ultra-high field NMR experiments, optimization of decoupling schemes and assessment of the fundamental limits on the resolution of solid-state NMR spectra.

Related Literature

Atomic Sn sites on nitrogen-doped carbon as a zincophilic and hydrophobic protection layer for stable Zn anodes

Yijie Wang, Yan Tan, Chuanwei Cheng

2023-11-25 Paper

DOI: 10.1039/D3TA06372K

Asymmetric dual species copper(ii/i) electrolyte dye-sensitized solar cells with 35.6% efficiency under indoor light

Renjith S. Pillai, Frédéric Sauvage, Anders Hagfeldt

2023-11-27 Paper

DOI: 10.1039/D3TA06046B

Fiber-in-tube RuxCr1−xOy as highly efficient electrocatalysts for pH-universal water oxidation via facile bubble desorption

Chaewon Song, Dasol Jin, Subin Choi, Youngmi Lee

2023-10-30 Paper

DOI: 10.1039/D3TA05897B

Spiro[fluorene-9,9′-xanthene]-based hole shuttle materials for effective defect passivation in perovskite solar cells

Bommaramoni Yadagiri, Sanjay Sandhu, Ashok Kumar Kaliamurthy, Francis Kwaku Asiam, Jongdeok Park, Appiagyei Ewusi Mensah, Jae-Joon Lee

2023-11-21 Paper

DOI: 10.1039/D3TA05915D

Improving the performance of a SnS2 cathode with interspace layer engineering using a Na+ insertion/extraction method for aqueous zinc ion batteries

Nima Mikaeili Chahartagh, Shahriar Namvar, Mahshid Ershadi, Ehsan Delfani

2023-12-11 Paper

DOI: 10.1039/D3TA05251F

Advanced electrolyte with high stability and low-temperature resistance for zinc-ion batteries

Qixian Bai, Qi Meng, Weiping Liu, Wenjun Lin, Pengfei Yi, Jingjing Tang, Guilin Zhang, Penghui Cao, Juan Yang

2023-11-22 Paper

DOI: 10.1039/D3TA05052A

A fluorescent hydrogen-bonded organic framework for highly selective sensing of mono-nitrophenol isomers in water

Yu-Xin Lin, Chenghao Jiang, Yu-Bo Wang, Jia-Xin Wang, Bin Li, Guodong Qian

2023-11-20 Paper

DOI: 10.1039/D3TA05309A

You might also like

Compound Q&A

How should waste containing 2-Ethyl-4-Methyl-1H-Imidazole-5-Carbaldehyde (CAS: 88634-80-4) be handled?

Waste containing 2-Ethyl-4-Methyl-1H-Imidazole-5-Carbaldehyde (CAS: 88634-80-4) ...

88634-80-42-Ethyl-4-Methyl-1H-...
Compound Q&A

What industries use Triethoxy(octyl)silane (CAS: 1385031-14-0)?

Triethoxy(octyl)silane (CAS: 1385031-14-0) is widely used in the pharmaceuticals...

1385031-14-0Triethoxy(octyl)sila...
Compound Q&A

Are there alternatives to 3-iodo-7-nitro-1H-indazole (CAS: 864724-64-1) in synthesis?

Several alternatives to 3-iodo-7-nitro-1H-indazole (CAS: 864724-64-1) exist in t...

864724-64-13-iodo-7-nitro-1H-in...
Compound Q&A

Are there alternatives to Benzene, bis[(trimethoxysilyl)ethyl] (CAS: 266317-71-9) in synthesis?

Yes, there are alternatives to Benzene, bis[(trimethoxysilyl)ethyl] (CAS: 266317...

266317-71-9Benzene, bis[(trimet...
Compound Q&A

Is Isothiazole-3-carbonitrile (CAS: 1452-17-1) safe?

Isothiazole-3-carbonitrile (CAS: 1452-17-1) is generally considered safe when us...

1452-17-1Isothiazole-3-carbon...
Compound Q&A

Is (3-Chlorophenyl)methanol (CAS: 873-63-2) safe?

(3-Chlorophenyl)methanol (CAS: 873-63-2) is considered low to moderately toxic. ...

873-63-2(3-Chlorophenyl)meth...
Compound Q&A

How is (2S,3S)-2-Hydroxy-3-({[(2-methyl-2-propanyl)oxy]carbonyl}amino)-3-(2-naphthyl)propanoic acid (CAS: 959583-98-3) typically synthesized?

(2S,3S)-2-Hydroxy-3-({[(2-methyl-2-propanyl)oxy]carbonyl}amino)-3-(2-naphthyl)pr...

959583-98-3(2S,3S)-2-Hydroxy-3-...
Compound Q&A

What precautions should be taken when handling Methyl 2-(bromomethyl)-5-methoxybenzoate (CAS: 788081-99-2)?

Proper handling of methyl 2-(bromomethyl)-5-methoxybenzoate requires the use of ...

788081-99-2Methyl 2-(bromomethy...
Compound Q&A

What is 6,8-Dibromoimidazo[1,2-a]pyridine-2-carboxylic acid (CAS: 904805-36-3)?

6,8-Dibromoimidazo[1,2-a]pyridine-2-carboxylic acid (CAS: 904805-36-3) is an aro...

904805-36-36,8-Dibromoimidazo[1...
Compound Q&A

Is 3-Amino-5-bromo-2-pyridinecarbonitrile (CAS: 573675-27-1) safe?

3-Amino-5-bromo-2-pyridinecarbonitrile is considered safe when handled under pro...

573675-27-13-Amino-5-bromo-2-py...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.