The A-center defect in diamond: quantum mechanical characterization through the infrared spectrum
Literature Information
Simone Salustro, Giuseppe Sansone, Claudio M. Zicovich-Wilson, Yves Noël, Lorenzo Maschio, Roberto Dovesi
The A-center in diamond, which consists of two nitrogen atoms substituting two neighboring carbon atoms, has been investigated at the quantum mechanical level using an all-electron Gaussian type basis set, hybrid functionals and the periodic supercell approach. In order to simulate different defect concentrations, four supercells have been considered containing 32, 64, 128 and 216 atoms, respectively. The ground state is a closed shell system where the two neighboring nitrogen atoms are separated, as a consequence of the strong repulsive interaction between the lone pairs, by 2.22 Å. The calculated band gap of a perfect diamond is 5.75 eV, which is in very good agreement with the experimental value of 5.80 eV (at 0 °K); the vertical electronic transition energy from the defective band to the conduction band is 4.75 and 4.46 eV for the cells containing 128 and 216 atoms, respectively. The presence of the A-center does not affect the Raman spectrum of diamond. Several intense peaks appear on the contrary in the IR spectrum, which permit (or should permit) the identification of this defect. The four peaks proposed by Sutherland et al. (Nature, 1954, 174, 901–904) and widely accepted as fingerprints of the A-center (at 480, 1093, 1203, 1282 cm−1), and the most important features of the spectrum published by Davies 22 years later (J. Phys. C: Solid State Phys., 1976, 9, 537–542) are very well reproduced by our simulated spectrum with the largest supercell. The modes in which the nitrogen atoms are more involved are identified by the frequency shift due to the 14N → 15N isotopic substitution; the two modes corresponding to the experimental ones at 480 and 1282 cm−1 show the largest isotopic shift. The graphical animation of the modes (available at http://www.pmmp.jussieu.fr/yves/Jmolvib/?name=A_freq.xyz&spt=A_freq.spt) not only confirms this attribution, but permits also the investigation of the nature of the full set of modes.
Related Literature
A desulphurization strategy for Sonogashira couplings by visible light/copper catalysis
Xuan Li, Xiaolong Zhu, Xiuyan Song, Qirong Deng, Jian Lv
DOI: 10.1039/D1QO01548F
One-pot enantioselective construction of 3,4-dihydro-2H-1,4-oxazines over Ru/Au relay catalysis and its mechanistic serendipity
Dongfeng Yang, Chengyi Wang, Yu Wang, Guohua Liu, Tanyu Cheng, Rui Liu
DOI: 10.1039/D1QO01482J
Rh(iii)-Catalyzed tandem C(sp2)–H allylation/N-alkylation annulation of arene amides with 2-alkylidenetrimethylene carbonates
Hui Xie, Jin-Yi Liang, Zhuo-Jun Huang, Bing Shu, Yi-Chuan Zheng, Yan-Zhi Liu, Shao-Yong Chen, Xu-Ge Liu, Shang-Shi Zhang
DOI: 10.1039/D1QO01129D
In situ phosphonium-containing Lewis base-catalyzed 1,6-cyanation reaction: a facile way to obtain α-diaryl and α-triaryl acetonitriles
Yuan Chen, Xiaoyu Ren, Yumeng Guo, Bing Yi, Hongkui Zhang, Guowei Gao, Tianli Wang
DOI: 10.1039/D1QO01501J
Mixed carboxylic–sulfonic anhydride in reaction with imines: a straightforward route to water-soluble β-lactams via a Staudinger-type reaction
Olga Bakulina, Dmitry Dar'in, Mikhail Krasavin
DOI: 10.1039/C8OB00768C
Acetylation of alcohols and amines under visible light irradiation: diacetyl as an acylation reagent and photosensitizer
Pengcheng Lian, Ruyi Li, Xiao Wan, Zixin Xiang, Hang Liu, Zhiyu Cao, Xiaobing Wan
DOI: 10.1039/D1QO01613J
A mechanistic study on the regioselective Ni-catalyzed methylation–alkenylation of alkyne with AlMe3 and allylic alcohol
Jiao Liu, Deguang Liu, Wan Nie, Haizhu Yu, Jing Shi
DOI: 10.1039/D1QO01580J
Recent advances in catalytic enantioselective direct C–H bond functionalization of electron-deficient N-containing heteroarenes
Xiao-Lan Liu, Luo-Bin Jiang, Mu-Peng Luo, Zhi Ren, Shou-Guo Wang
DOI: 10.1039/D1QO01223A
Efficient enantioselective synthesis of CF2H-containing dispiro[benzo[b]thiophene-oxindole-pyrrolidine]s via organocatalytic cycloaddition
Yabo Deng, Yongzhen Li, Yalan Wang, Shuo Sun, Sichao Ma, Pengfei Jia, Wenguang Li, Kairong Wang, Wenjin Yan
DOI: 10.1039/D1QO01392K
You might also like
What industries use (1R,3S)-1,3-Cyclopentanediol (CAS: 16326-97-9)?
(1R,3S)-1,3-Cyclopentanediol finds applications in various industries. In the ph...
What precautions should be taken when handling N'-[4-(Dimethylamino)phenyl]-N,N-dimethyl-1,4-benzenediamine (CAS: 637-31-0)?
When handling N'-[4-(Dimethylamino)phenyl]-N,N-dimethyl-1,4-benzenediamine, it i...
Are there alternatives to 5-(2,4-Difluorophenyl)-2-methoxypyrimidine (CAS: 1352318-16-1) in synthesis?
There are several alternatives to 5-(2,4-Difluorophenyl)-2-methoxypyrimidine in ...
What regulatory guidelines apply to 1-(3-Methoxyphenoxy)propan-2-ol (CAS: 382141-68-6)?
1-(3-Methoxyphenoxy)propan-2-ol (CAS: 382141-68-6) must comply with the Globally...
Is Tetrodotoxin Citrate (CAS: 18660-81-6) safe?
Tetrodotoxin Citrate is extremely dangerous and should be handled with extreme c...
What are the main uses of 2-Methyl-2-propanyl [(1R,3S)-3-hydroxycyclopentyl]carbamate (CAS: 225641-84-9)?
2-Methyl-2-propanyl [(1R,3S)-3-hydroxycyclopentyl]carbamate (CAS: 225641-84-9) i...
How should waste containing 4-(2-Hydroxyhexafluoroisopropyl)Benzoic Acid (CAS: 16261-80-6) be handled?
Waste containing 4-(2-Hydroxyhexafluoroisopropyl)Benzoic Acid (CAS: 16261-80-6) ...
How is 2-Methyl-2-proanyl {(2S)-1-[(benzyloxy)amino]-3-hydroxy-3-methyl-1-oxo-2-butanyl}carbamate (CAS: 102507-19-7) typically synthesized?
2-Methyl-2-proanyl {(2S)-1-[(benzyloxy)amino]-3-hydroxy-3-methyl-1-oxo-2-butanyl...
What is Benzeneethanamine, α-ethyl-, hydrochloride (1:1) (CAS: 20735-15-3)?
Benzeneethanamine, α-ethyl-, hydrochloride (1:1) is an organic compound with the...
Are there alternatives to 3-{(E)-[4-(Dimethylamino)phenyl]diazenyl}benzoic acid (CAS: 20691-84-3) in synthesis?
In the synthesis of compounds similar to 3-{(E)-[4-(Dimethylamino)phenyl]diazeny...
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.














![N-[(5,6-Dichloro-1H-benzimidazol-2-yl)methyl]-9-(1-methyl-1H-pyrazol-4-yl)-2-(4-morpholinyl)-9H-purin-6-amine structure N-[(5,6-Dichloro-1H-benzimidazol-2-yl)methyl]-9-(1-methyl-1H-pyrazol-4-yl)-2-(4-morpholinyl)-9H-purin-6-amine structure](https://static.chemtradehub.com/structs/238/2387704-62-1-25f4.webp)