The synthesis and tissue adhesiveness of temperature-sensitive hyperbranched poly(amino acid)s with functional side groups
Literature Information
Dedai Lu, Yongyong Zhang, Ting'e Li, Yunfei Li, Hongsen Wang, Zhiqiang Shen, Qiangbing Wei, Ziqiang Lei
The incorporation of L-3,4-dihydroxyphenylalanine (L-DOPA) residues in mussel-like biomimetic copolymers has drawn great attention due to their adhesive properties. In this work, a series of temperature-sensitive and hyperbranched poly(amino acid)s containing different functional side groups (catechol, guanidyl, mercapto and double bond) were designed and synthesized by the ring-opening polymerization of N-carboxy-α-amino acid anhydride (NCA), using a temperature-sensitive and multi-hydroxyl end pluronic L-31 as the initiator in this process. The tissue adhesive properties of these copolymers were evaluated by tensile strength tests on wet pork skin. We found that the topological structure, side groups of copolymers, adhesive temperature and cure time had influence on the wet adhesive strength, especially side groups. While only L-DOPA was incorporated into copolymeric chains, the wet adhesive strength was about 106 kPa. With guanidyl, mercapto and double bonds incorporated into copolymeric chains, an obvious increase in the wet adhesive strength was observed. Additionally, the wet adhesive strength improved by about 20 kPa at body temperature (37 °C) as compared to that at room temperature (25 °C). Meanwhile, we found that it has good biocompatibility and degradability through its cytotoxicity and degradation tests.
Related Literature
Rheo-optical study of colloidal crystals
Tsuneo Okubo, Hiroshi Kimura, Tohru Hatta, Takaharu Kawai
DOI: 10.1039/B109963A
Site selective hydroxylation of the MgO surface
O. Diwald, M. Sterrer, E. Knözinger
DOI: 10.1039/B110334B
Micellar aggregation of sulfonate surfactants studied by electron paramagnetic resonance of a cationic nitroxide: an experimental and computational approach
A. M. Tedeschi, G. D'Errico, E. Busi, R. Basosi, V. Barone
DOI: 10.1039/B106833D
Photophysical properties of [N]phenylenes
C. Dosche, H.-G. Löhmannsröben, A. Bieser, P. I. Dosa, S. Han, M. Iwamoto, A. Schleifenbaum, K. P. C. Vollhardt
DOI: 10.1039/B109342H
Coupling between dipole-bound and valence states: the nitromethane anion
DOI: 10.1039/B202143A
Phase behaviour of room temperature ionic liquid solutions: an unusually large co-solvent effect in (water + ethanol)
Vesna Najdanovic-Visak, José M. S. S. Esperança, Luís P. N. Rebelo, Manuel Nunes da Ponte, Henrique J. R. Guedes, Kenneth R. Seddon, Jerzy Szydlowski
DOI: 10.1039/B201723G
Scanning plasmon near-field microscopy: signal–noise ratio of different registration schemes and prospects for single molecule detection
V. N. Konopsky, S. A. Saunin, V. A. Bykov, E. A. Vinogradov
DOI: 10.1039/B109955H
Potential energy and free energy surfaces of the formic acid dimer: Correlated ab initio calculations and molecular dynamics simulations
Jana Chocholoušová, Jaroslav Vacek, Pavel Hobza
DOI: 10.1039/B110872G
Laser spectroscopy of 1,2,3,4-tetrahydro-1-naphthol·ROH (R = H, CH3) clusters
A. Paladini, M. Satta, D. Catone, A. Filippi, S. Piccirillo, M. Speranza
DOI: 10.1039/B201347A
Optical and electronic properties of neutral and charged oligodiacetylene clusters
DOI: 10.1039/B111624J
You might also like
How should waste containing (6-Bromo-2-naphthyl)oxy](dimethyl)(2-methyl-2-propanyl)silane be handled?
Waste containing (6-Bromo-2-naphthyl)oxy](dimethyl)(2-methyl-2-propanyl)silane (...
How is 7-Fluoro-4-isoquinolinecarboxylic acid (CAS: 1841081-40-0) typically synthesized?
7-Fluoro-4-isoquinolinecarboxylic acid can be synthesized via a multi-step proce...
What are the physical and chemical properties of 2,3,5,6-Tetrabromothieno[3,2-b]thiophene (CAS: 124638-53-5)?
2,3,5,6-Tetrabromothieno[3,2-b]thiophene is a crystalline compound with a high m...
Is 1-[4-(Benzylamino)-7,8-dihydro-5H-pyrano[4,3-d]pyrimidin-2-yl]-2-methyl-1H-indole-4-carboxamide (CAS: 1542705-92-9) safe?
1-[4-(Benzylamino)-7,8-dihydro-5H-pyrano[4,3-d]pyrimidin-2-yl]-2-methyl-1H-indol...
What is the market or research trend for imidazo[5,1-d]-1,2,3,5-tetrazine-8-carboxylic acid, 3,4-dihydro-3-methyl-4-oxo- (CAS: 113942-30-6)?
The market for imidazo[5,1-d]-1,2,3,5-tetrazine-8-carboxylic acid, 3,4-dihydro-3...
What is 3-(Triisopropylsilyl)propiolaldehyde (CAS: 163271-80-5)?
3-(Triisopropylsilyl)propiolaldehyde is a synthetic organic compound with the CA...
What regulatory guidelines apply to 6-Nitro-2H-1,4-benzoxazin-3(4H)-one (CAS: 81721-87-1)?
6-Nitro-2H-1,4-benzoxazin-3(4H)-one (CAS: 81721-87-1) is subject to various regu...
How should waste containing (3-Fluorophenyl)(4-{[(2-methyl-2-propanyl)oxy]carbonyl}-1-piperazinyl)acetic acid (CAS: 885272-91-3) be handled?
Waste containing (3-Fluorophenyl)(4-{[(2-methyl-2-propanyl)oxy]carbonyl}-1-piper...
What are the physical and chemical properties of N,N'-4,4'-Biphenyldiyldiisonicotinamide (CAS: 55119-40-9)?
N,N'-4,4'-Biphenyldiyldiisonicotinamide is a white crystalline solid with a mole...
What industries use 6-Bromo-8-fluoro-2-quinazolinol (CAS: 1036756-15-6)?
6-Bromo-8-fluoro-2-quinazolinol is primarily used in the pharmaceutical industry...
Source Journal
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.










![N-[(E)-Phenylmethylene]benzenesulfonamide structure N-[(E)-Phenylmethylene]benzenesulfonamide structure](https://static.chemtradehub.com/structs/139/13909-34-7-8167.webp)
![2,2'-{2,2-Propanediylbis[(2,6-dibromo-4,1-phenylene)oxy]}diethanol structure 2,2'-{2,2-Propanediylbis[(2,6-dibromo-4,1-phenylene)oxy]}diethanol structure](https://static.chemtradehub.com/structs/416/4162-45-2-b3d6.webp)


