Defect structure and optical phonon confinement in ultrananocrystalline BixSn1−xO2 (x = 0, 0.03, 0.05, and 0.08) synthesized by a sonochemical method

Literature Information

Publication Date 2016-01-18
DOI 10.1039/C5CP06214D
Impact Factor 3.676
Authors

L. Aswaghosh, Divinah Manoharan, N. Victor Jaya


View Original

Abstract

We report the structure of defect and the oxygen vacancy-induced optical phonon confinement in phase pure tetragonal rutile crystal structured ultrananocrystalline BixSn1−xO2 (x = 0, 0.03, 0.05, 0.08) with high surface area synthesized by sonochemical method. As the Bi ion incorporates into the SnO2 host lattice, it replaces the Sn ions marked by the lattice expansion, which leads to the formation of oxygen vacancies so as to maintain charge neutrality. The grain size reduces from 6 nm to 3 nm with increase in Bi content from 0% to 8%. The size effect and the increased oxygen vacancy concentration were found to induce phonon confinement within the grain. This has led to interesting changes in the vibrational spectra of the ultrananocrystalline BixSn1−xO2 as the size reduces below 9 nm. Absence of periodicity beyond this critical particle size relaxes the zone-centre optical phonon selection rule, causing the Raman spectrum to have contributions also from phonons away from the Brillouin-zone centre. The structure of defects, such as the in-plane, bridging and sub-bridging oxygen vacancies present, was confirmed using Raman spectroscopic analysis. The reason for enhancement in photoluminescence behaviour with increased Bi content is discussed. The energy band gap was found to be wider (∼4 eV) compared to the bulk and reveals an increasing trend as a function of Bi%. The increase in band gap with decrease in particle size marks the quantum confinement effect. The variation of band gap upon doping is due to the BM shift effect, which arises as a result of the increase in carrier concentration.

Related Literature

Direct transformation of 5-hydroxymethylfurfural to the building blocks 2,5-dihydroxymethylfurfural (DHMF) and 5-hydroxymethyl furanoic acid (HMFA) via Cannizzaro reaction

Svilen P. Simeonov, José M. S. S. Esperança, Luís Paulo N. Rebelo, Carlos A. M. Afonso

2013-08-06 Paper

DOI: 10.1039/C3GC40930A

Ammoxidation of allyl alcohol – a sustainable route to acrylonitrile

Wolfgang F. Hölderich

2013-08-12 Communication

DOI: 10.1039/C3GC41089G

A new generation of aprotic yet Brønsted acidic imidazolium salts: effect of ester/amide groups in the C-2, C-4 and C-5 on antimicrobial toxicity and biodegradation

Rohitkumar G. Gore, Lauren Myles, Marcel Spulak, Ian Beadham, Teresa M. Garcia, Stephen J. Connon, Nicholas Gathergood

2013-09-05 Paper

DOI: 10.1039/C3GC40992A

Back cover

Cover

DOI: 10.1039/C3GC90051G

Additions and corrections

Front/Back Matter

DOI: 10.1039/C3GC90046K

Antioxidant canolol production from a renewable feedstock via an engineered decarboxylase

Krista L. Morley, Stephan Grosse, Hannes Leisch

2013-10-03 Paper

DOI: 10.1039/C3GC40748A

Revisiting the Brønsted acid catalysed hydrolysis kinetics of polymeric carbohydrates in ionic liquids by in situ ATR-FTIR spectroscopy

Andreas J. Kunov-Kruse, Anders Riisager, Shunmugavel Saravanamurugan, Rolf W. Berg, Steffen B. Kristensen, Rasmus Fehrmann

2013-07-22 Paper

DOI: 10.1039/C3GC41174E

Synthesis of thioesters through copper-catalyzed coupling of aldehydes with thiols in water

Chih-Lun Yi, Yu-Ting Huang, Chin-Fa Lee

2013-06-28 Paper

DOI: 10.1039/C3GC40946E

Front cover

Cover

DOI: 10.1039/C3GC90041J

You might also like

155412-88-71-(3-Aminophenyl)-3-...
Compound Q&A

How should waste containing 1-(D-Ribofuranosyl)-1,4-dihydro-3-pyridinecarboxamide (CAS: 19132-12-8) be handled?

Waste containing 1-(D-Ribofuranosyl)-1,4-dihydro-3-pyridinecarboxamide (CAS: 191...

19132-12-81-(D-Ribofuranosyl)-...
Compound Q&A

What regulatory guidelines apply to 2-Methyl-2-propanyl 3-bromo-3-(hydroxymethyl)-1-azetidinecarboxylate (CAS: 2007919-81-3)?

2-Methyl-2-propanyl 3-bromo-3-(hydroxymethyl)-1-azetidinecarboxylate (CAS: 20079...

2007919-81-32-Methyl-2-propanyl ...
Compound Q&A

What is N-(4-Chloro-2-pyridinyl)acetamide (CAS: 245056-66-0)?

N-(4-Chloro-2-pyridinyl)acetamide (CAS: 245056-66-0) is a chemical compound with...

245056-66-0N-(4-Chloro-2-pyridi...
Compound Q&A

What is 5-Chloro-2-hydroxybenzoic acid (CAS: 321-14-2)?

5-Chloro-2-hydroxybenzoic acid, also known as 5-chlorosalicylic acid, is an arom...

321-14-25-Chloro-2-hydroxybe...
Compound Q&A

What precautions should be taken when handling 1,1-Dichloro-1-fluoroethane (CAS: 1717-00-6)?

When handling 1,1-Dichloro-1-fluoroethane (CAS: 1717-00-6), it is important to u...

1717-00-61,1-Dichloro-1-fluor...
Compound Q&A

What are the physical and chemical properties of Fmoc-(2S,3R)-3-phenylpyrrolidine-2-carboxylic acid (CAS: 281655-32-1)?

Fmoc-(2S,3R)-3-phenylpyrrolidine-2-carboxylic acid is a white crystalline solid ...

281655-32-1Fmoc-(2S,3R)-3-pheny...
Compound Q&A

What are the main uses of 4-Amino-5-bromo-2-pyridinecarboxylic acid (CAS: 1363381-01-4)?

4-Amino-5-bromo-2-pyridinecarboxylic acid is primarily used as a precursor in th...

1363381-01-44-Amino-5-bromo-2-py...
1007881-98-2(S)-tert-butyl 2-((2...
Compound Q&A

What precautions should be taken when handling 8-bromo-2,2-dimethyl-3,4-dihydro-2H-1,4-benzoxazin-3-one (CAS: 688363-73-7)?

When handling 8-bromo-2,2-dimethyl-3,4-dihydro-2H-1,4-benzoxazin-3-one, use prop...

688363-73-78-bromo-2,2-dimethyl...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.