Hygroscopic and phase transition properties of alkyl aminium sulfates at low relative humidities

Literature Information

Publication Date 2015-07-08
DOI 10.1039/C5CP02404H
Impact Factor 3.676
Authors

Yangxi Chu, Meike Sauerwein


View Original

Abstract

Alkyl aminium sulfates (AASs) can affect the physicochemical properties of atmospheric aerosols such as hygroscopicity. Previous laboratory experiments have shown that the water content in AAS bulk solutions is higher than in aqueous ammonium sulfate solution in the range of 60–95% relative humidity (RH). Furthermore, amine was found to evaporate from the solution during the preparation of AASs from the parent amine and sulfuric acid solutions. Here we report the hygroscopicities of deposited particles of four AASs at different aminium-to-sulfate molar ratios (A/Ss) in the range of <3–90% RH using air-flow cells coupled with in situ micro-Raman spectroscopy. Normalized integrated areas of O–H stretching peaks in the Raman spectra were converted to water-to-solute molar ratios (WSRs) at various RH values. Evaporation of amine was also observed in most cases and the exact A/Ss of sample particles or solutions were determined by ion chromatography. Mono-methylaminium sulfate (MMAS) and mono-ethylaminium sulfate (MEAS) particles were stable at A/S = 2.0, but di-methylaminium sulfate (DMAS) and tri-methylaminium sulfate (TMAS) suffered from DMA and TMA evaporation and eventually equilibrated to the A/S of 1.5 and 1.0, respectively. At these stable compositions MMAS and MEAS exhibited phase transitions in the super-saturation region, while DMAS and TMAS showed a continuous and reversible water uptake. Besides, an approach to estimate the hygroscopicities of DMAS and TMAS particles at an initial A/S larger than that of the stable compositions was presented. In the range of 60–95% RH, the WSRs of all the studied AAS particles were consistent with a previous study based on experimental values and the extended Zdanovskii–Stokes–Robinson equation. In general, all the studied AASs were more hygroscopic than their corresponding ammonium counterparts within the studied RH range and evaporation of amine needs to be corrected in studying unstable AAS particles.

Related Literature

Chromium deposition and poisoning at La0.6Sr0.4Co0.2Fe0.8O3−δ oxygen electrodes of solid oxide electrolysis cells

Kongfa Chen, Ling Zhao, Zhe Lü, San Ping Jiang

2014-11-27 Paper

DOI: 10.1039/C4CP05110F

Theoretical study and design of multifunctional phosphorescent platinum(ii) complexes containing triarylboron moieties for efficient OLED emitters

Yong Wu, Guo-Gang Shan, Hai-Bin Li, Shui-Xing Wu, Xin-Yao Ren, Yun Geng, Zhong-Min Su

2014-12-01 Paper

DOI: 10.1039/C4CP04919E

Analysis of computational models for an accurate study of electronic excitations in GFP

Tobias Schwabe, Maarten T. P. Beerepoot, Jacob Kongsted

2014-12-03 Paper

DOI: 10.1039/C4CP04524F

The electronic structure of metal–molecule hybrids in charged interfaces: surface-enhanced Raman selection rules derived from plasmon-like resonances

J. Román-Pérez, I. López-Tocón, J. L. Castro, J. F. Arenas, J. Soto, J. C. Otero

2014-10-30 Communication

DOI: 10.1039/C4CP04724A

Behind the color switching in gasochromic VO2

Jeng-Lung Chen, Chun-Chieh Chang, Chi Liang Chen, Chih-Chin Hsu, Wei-Luen Jang, Da-Hua Wei, Chung-Li Dong, Chih-Wen Pao, Jyh-Fu Lee, Jin-Ming Chen, Jinghua Guo, Maw-Kuen Wu

2014-12-16 Paper

DOI: 10.1039/C4CP04623D

Carbon nanotubes oxidized by a green method as efficient metal-free catalysts for nitroarene reduction

Shuchang Wu, Guodong Wen, Robert Schlögl, Dang Sheng Su

2014-11-26 Communication

DOI: 10.1039/C4CP04658G

Resolving stress tensor components in space from polarized Raman spectra: polycrystalline alumina

Giuseppe Pezzotti, Wenliang Zhu

2014-11-24 Paper

DOI: 10.1039/C4CP04244A

You might also like

Compound Q&A

What are the main uses of (5-Sulfamoyl-3-pyridinyl)boronic acid (CAS: 951233-61-7)?

(5-Sulfamoyl-3-pyridinyl)boronic acid is primarily used in chemical synthesis, p...

951233-61-7(5-Sulfamoyl-3-pyrid...
Compound Q&A

How is Benzyl 2-methyl-2-(methylsulfonyl)-4-pentenoate (CAS: 1942858-50-5) typically synthesized?

Benzyl 2-methyl-2-(methylsulfonyl)-4-pentenoate is typically synthesized via est...

1942858-50-5Benzyl 2-methyl-2-(m...
Compound Q&A

What precautions should be taken when handling 8-Fluoroquinolin-6-ol (CAS: 209353-22-0)?

When handling 8-Fluoroquinolin-6-ol (CAS: 209353-22-0), it is important to use p...

209353-22-08-Fluoroquinolin-6-o...
Compound Q&A

What are the physical and chemical properties of 1,3-Dibromo-5-(2-methyl-2-propanyl)benzene (CAS: 129316-09-2)?

1,3-Dibromo-5-(2-methyl-2-propanyl)benzene (CAS: 129316-09-2) is a crystalline c...

129316-09-21,3-Dibromo-5-(2-met...
Compound Q&A

What industries use Ethyl 7-chloro-4-oxo-1-(1,3-thiazol-2-yl)-1,4-dihydro-1,8-naphthyridine-3-carboxylate (CAS: 174726-87-5)?

Ethyl 7-chloro-4-oxo-1-(1,3-thiazol-2-yl)-1,4-dihydro-1,8-naphthyridine-3-carbox...

174726-87-5Ethyl 7-chloro-4-oxo...
Compound Q&A

What precautions should be taken when handling Delta-7-Avenasterol (CAS: 23290-26-8)?

When handling Delta-7-Avenasterol (CAS: 23290-26-8), it is important to wear app...

23290-26-8Delta-7-Avenasterol
872992-20-6N-({(5R)-3-[3-Fluoro...
Compound Q&A

What precautions should be taken when handling 2-Methyl-2-proanyl 4-[(2-aminophenyl)amino]-1-piperidinecarboxylate (CAS: 79099-00-6)?

When handling 2-Methyl-2-proanyl 4-[(2-aminophenyl)amino]-1-piperidinecarboxylat...

79099-00-62-Methyl-2-propanyl ...
Compound Q&A

What is N-Methyl-4-chlorobenzylamine hydrochloride (CAS: 65542-24-7)?

N-Methyl-4-chlorobenzylamine hydrochloride (CAS: 65542-24-7) is a organic compou...

65542-24-7N-Methyl-4-chloroben...
Compound Q&A

Is [2-(Dodecyloxy)ethoxy]acetic acid (CAS: 27306-90-7) safe?

[2-(Dodecyloxy)ethoxy]acetic acid (CAS: 27306-90-7) is generally considered safe...

27306-90-7[2-(Dodecyloxy)ethox...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.