Molecular dynamics simulations of proton-ordered water confined in low-diameter carbon nanotubes
Literature Information
Shujuan Li, Burkhard Schmidt
The present work deals with molecular dynamics simulations of water confined in single-walled carbon nanotubes (CNTs), with emphasis on the proton-ordering of water and its polarization. First, the water occupancy of open-ended armchair and zigzag CNTs immersed in water under ambient NPT conditions is calculated for various water models, and for varying Lennard-Jones parameters of the water–carbon interaction. As a function of the CNT diameter, the water density displays several oscillations before converging to the bulk value. Based on these results, the water structures encapsulated in 10 nm long armchair CNTs (n,n) with 5 ≤ n ≤ 10, are investigated under NVT conditions. Inside the smallest nanotubes (n = 5, 6) highly ferroelectric (FE), quasi-one-dimensional water chains are found while inside the other CNTs water molecules assemble into single-walled ice nanotubes (INTs). There are several, near-degenerate minimum energy INT structures: single helical structures were found for 7 ≤ n ≤ 10, in all cases in FE arrangement. In addition, a double helical INT structure was found for n = 8 with an even higher polarization. Prism-like structures were found only for 8 ≤ n ≤ 10 with various FE, ferrielectric (FI), and antiferroelectric (AF, n = 9, 10) proton ordering. The coexistence of the nearly iso-energetic FE, FI, and AF INT structures separated by high barriers renders the molecular dynamics highly metastable, typically with nanosecond timescales at room temperature. Hence, the replica exchange simulation method is used to obtain populations of different INT states at finite temperatures. Many of the FE INT structures confined in low-diameter CNTs are still prevalent at room temperature. Both helix–helix and helix–prism structural transitions are detected which can be either continuous (around 470 K for n = 8) or discontinuous (at 218 K for n = 9). Also melting-like transitions are found in which the INT structures are disrupted leading to a loss of FE or FI ordering of the water orientations. Also these transitions can be either smooth (for n = 7, 8) or abrupt, first-order transitions, at T = 362 K for n = 9 and at T = 285 K for n = 10.
Recommended Journals
Related Literature
Degradation analysis of inverted PM6 (PBDB-T-2F):Y7 (BTP-4CI) solar cells with PDINO and MoO3 as the ETL/HTL
Angel Sacramento, José L. Abad, Magaly Ramírez-Como, Victor S. Balderrama, Magali Estrada
DOI: 10.1039/D3SE00977G
f-Block reactions of metal cations with carbon dioxide studied by inductively coupled plasma tandem mass spectrometry
Richard M Cox, Kali M. Melby, Amanda D. French, Michael J. Rodriguez
DOI: 10.1039/D3CP04180H
Design for six sigma-based energy management for a plug-in fuel cell electric bus considering the noise disturbance
Daizheng Hou, Ruijie Li, Qiang Wang
DOI: 10.1039/D3SE01184D
Solvent-controlled synthesis of hydrophilic and hydrophobic carbon dots
Chenhan Zhang, Zhihua Ying, Yuan Jiang, Haiyang Wang, Xuebin Zhou, Weipeng Xuan, Peng Zheng
DOI: 10.1039/D3CP04273A
Differential effects of MoO3 and MoO2 sacrificial layers on the J–V performance of Cu2ZnSn(S,Se)4 solar cells
Jinhui Zhang, Chuanhe Ma, Haixuan Gao, Jinchun Jiang, Hailong Wang
DOI: 10.1039/D3SE01409F
Exploring fullerene derivatives for optoelectronic applications: synthesis and characterization study
Jovana Jakšić, Evgenija Milinković, Katarina Cvetanović, Zorana Tokić Vujošević, Vladislav Jovanov, Aleksandra Mitrović, Veselin Maslak
DOI: 10.1039/D3CP04322C
Self-assembly morphology transition mechanism of similar amphiphilic molecules
Guohui Li
DOI: 10.1039/D3CP04556K
In situ-fabricated quasi-solid polymer electrolytes incorporating an ionic liquid for flexible supercapacitors
Hai Lu, Peichun Wang, Yitian Ma, Meng Liu, Linqing Chang, Rui Feng, Shuliang Luo, Zhiyun Zhang, Yi Wang, Yan Yuan
DOI: 10.1039/D3SE01171B
Degradation of NTO induced by superoxide and hydroperoxyl radicals: a comprehensive DFT study
Liudmyla K. Sviatenko, Jerzy Leszczynski
DOI: 10.1039/D3CP05603A
You might also like
How should waste containing 4-Bromo-3-methyl-2-thiophenecarboxylic acid (CAS: 265652-39-9) be handled?
Waste containing 4-Bromo-3-methyl-2-thiophenecarboxylic acid (CAS: 265652-39-9) ...
What industries use (2S,5S,2'S,5'S)-1,1'-(1,2-Ethanediyl)bis(2,5-dimethylphospholane) (CAS: 136779-26-5)?
(2S,5S,2'S,5'S)-1,1'-(1,2-Ethanediyl)bis(2,5-dimethylphospholane) is primarily u...
What industries use Ethyl 2-(2-bromo-5-fluorophenyl)acetate (CAS: 1214910-61-8)?
Ethyl 2-(2-bromo-5-fluorophenyl)acetate (CAS: 1214910-61-8) is used in the pharm...
How is 4-Methyl-2-benzofuran-1,3-dione (CAS: 4792-30-7) typically synthesized?
4-Methyl-2-benzofuran-1,3-dione (CAS: 4792-30-7) can be synthesized through seve...
What industries use 4,6-Dichloroquinoline-3-carbonitrile (CAS: 936498-04-3)?
4,6-Dichloroquinoline-3-carbonitrile (CAS: 936498-04-3) is used in the pharmaceu...
What are the main uses of Chloro[tris(para-trifluoromethylphenyl)phosphine]gold(I) (CAS: 385815-83-8)?
Chloro[tris(para-trifluoromethylphenyl)phosphine]gold(I) is primarily used in or...
Is 2-Bromo-5-nitrofuran (CAS: 823-73-4) safe?
2-Bromo-5-nitrofuran (CAS: 823-73-4) is generally considered safe when handled w...
How should 5-Bromo-2,3,4-trifluorobenzoic acid (CAS: 212631-85-1) be stored?
5-Bromo-2,3,4-trifluorobenzoic acid should be stored in a cool, dry place away f...
What are the main uses of Zinc bis(aminoacetate) (CAS: 7214-08-6)?
Zinc bis(aminoacetate) (CAS: 7214-08-6) is primarily used in the pharmaceutical ...
How should Adamantan-1-ylmethanol (CAS: 770-71-8) be stored?
Adamantan-1-ylmethanol should be stored in a cool, dry, and well-ventilated plac...
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.










![(2R)-2,7,8-Trimethyl-2-[(4R,8R)-4,8,12-trimethyltridecyl]-6-chromanol structure (2R)-2,7,8-Trimethyl-2-[(4R,8R)-4,8,12-trimethyltridecyl]-6-chromanol structure](https://static.chemtradehub.com/structs/54-/54-28-4-155c.webp)



