Standard free energy of the equilibrium between the trans-monomer and the cyclic-dimer of acetic acid in the gas phase from infrared spectroscopy

Literature Information

Publication Date 2015-02-23
DOI 10.1039/C4CP05684A
Impact Factor 3.676
Authors

Manuel Goubet, Florent Réal, Thérèse R. Huet, Pascale Roy, Robert Georges


View Original

Abstract

Survey jet-cooled spectra of acetic acid have been recorded in the infrared region (200–4000 cm−1) over a wide range of expansion conditions. From the variations of the relative intensities of the signals, vibrational transitions have been assigned unambiguously to the trans-monomer and cyclic-dimer. The IR-active fundamental frequencies have been determined at the instrumental accuracy of 0.5 cm−1. This analysis of the jet-cooled spectra supported by electronic structure calculations permitted us to characterize the trans-monomer/cyclic-dimer equilibrium. From static cell spectra at 298 K, variations of the molar fractions ratio as a function of the total pressure were used to estimate the equilibrium constant and the Gibbs free energy of dimerization at 298 K. The very good agreement with the literature data shows that the present method is able to produce, from a single study, a free energy value as reliable as the one obtained from a large collection of data. In addition, the semi-empirical free energy value was used to estimate the accuracy of electronic structure calculations and in turn the accuracy of the derived useful information such as the dissociation energy of the complex (i.e. the strength of the hydrogen bonds) or the relative energies within the conformational landscape.

Related Literature

Silicon nanocrystal hybrid photocatalysts as models to understand solar fuels producing assemblies

Simran S. Saund, Abha Dabak-Wakankar, Melissa K. Gish

2023-12-12 Paper

DOI: 10.1039/D3SE01512B

Revealing the evolution of local structures in the formation process of alkaline earth metal cation-containing zeolites from glasses

Makiko Deguchi, Kentaro Kobayashi, Sohei Sukenaga, Mariko Ando, Hiroyuki Shibata, Akihiko Machida, Yutaka Yanaba, Tatsuya Okubo

2023-12-07 Paper

DOI: 10.1039/D3CP04954J

Valorisation of residual biomass by pyrolysis: influence of process conditions on products

A. C. M. Vilas-Boas, L. A. C. Tarelho, H. S. M. Oliveira, F. G. C. S. Silva, D. T. Pio, M. A. A. Matos

2023-12-04 Paper

DOI: 10.1039/D3SE01216F

Electrochemical CO2 conversion technologies: state-of-the-art and future perspectives

Remko J. Detz, Claire J. Ferchaud, Arie J. Kalkman, Jasmin Kemper, Carlos Sánchez-Martínez, Marija Saric, Manoj V. Shinde

2023-10-25 Perspective

DOI: 10.1039/D3SE00775H

An iron phosphate hydroxide hydrate electrocatalyst: synergistic effects of Fe2+ and Fe3+ for enhanced hydrogen evolution reaction stability

Jeygeerthika Reddy, Vivekanandan Raman, K. K. Viswanathan, Kandasamy Prabakar

2023-12-11 Paper

DOI: 10.1039/D3SE01488F

A minimal kinetic model for the interpretation of complex catalysis in single enzyme molecules

Prasanta Kundu, Soma Saha, Gautam Gangopadhyay

2023-11-21 Paper

DOI: 10.1039/D3CP01720F

Photoelectrochemical conversion of glycerol aqueous solution to value-added chemicals using Bi2Fe4O9 as a photoanode

Bruno L. da Silva, Saulo A. Carminati, Matheus B. C. Souza, Leonardo C. Soares, Claudia Longo, Pablo S. Fernández, Ana F. Nogueira

2023-10-18 Paper

DOI: 10.1039/D3SE01045G

Solvent-controlled synthesis of hydrophilic and hydrophobic carbon dots

Chenhan Zhang, Zhihua Ying, Yuan Jiang, Haiyang Wang, Xuebin Zhou, Weipeng Xuan, Peng Zheng

2023-12-08 Paper

DOI: 10.1039/D3CP04273A

You might also like

Compound Q&A

How should waste containing 4-Bromo-3-methyl-2-thiophenecarboxylic acid (CAS: 265652-39-9) be handled?

Waste containing 4-Bromo-3-methyl-2-thiophenecarboxylic acid (CAS: 265652-39-9) ...

265652-39-94-Bromo-3-methyl-2-t...
Compound Q&A

What industries use (2S,5S,2'S,5'S)-1,1'-(1,2-Ethanediyl)bis(2,5-dimethylphospholane) (CAS: 136779-26-5)?

(2S,5S,2'S,5'S)-1,1'-(1,2-Ethanediyl)bis(2,5-dimethylphospholane) is primarily u...

136779-26-5(2S,5S,2'S,5'S)-1,1'...
Compound Q&A

What industries use Ethyl 2-(2-bromo-5-fluorophenyl)acetate (CAS: 1214910-61-8)?

Ethyl 2-(2-bromo-5-fluorophenyl)acetate (CAS: 1214910-61-8) is used in the pharm...

1214910-61-8Ethyl 2-(2-bromo-5-f...
Compound Q&A

How is 4-Methyl-2-benzofuran-1,3-dione (CAS: 4792-30-7) typically synthesized?

4-Methyl-2-benzofuran-1,3-dione (CAS: 4792-30-7) can be synthesized through seve...

4792-30-74-Methyl-2-benzofura...
Compound Q&A

What industries use 4,6-Dichloroquinoline-3-carbonitrile (CAS: 936498-04-3)?

4,6-Dichloroquinoline-3-carbonitrile (CAS: 936498-04-3) is used in the pharmaceu...

936498-04-34,6-Dichloroquinolin...
Compound Q&A

What are the main uses of Chloro[tris(para-trifluoromethylphenyl)phosphine]gold(I) (CAS: 385815-83-8)?

Chloro[tris(para-trifluoromethylphenyl)phosphine]gold(I) is primarily used in or...

385815-83-8Chloro[tris(para-tri...
Compound Q&A

Is 2-Bromo-5-nitrofuran (CAS: 823-73-4) safe?

2-Bromo-5-nitrofuran (CAS: 823-73-4) is generally considered safe when handled w...

823-73-42-Bromo-5-nitrofuran
Compound Q&A

How should 5-Bromo-2,3,4-trifluorobenzoic acid (CAS: 212631-85-1) be stored?

5-Bromo-2,3,4-trifluorobenzoic acid should be stored in a cool, dry place away f...

212631-85-15-Bromo-2,3,4-triflu...
Compound Q&A

What are the main uses of Zinc bis(aminoacetate) (CAS: 7214-08-6)?

Zinc bis(aminoacetate) (CAS: 7214-08-6) is primarily used in the pharmaceutical ...

7214-08-6Zinc bis(aminoacetat...
Compound Q&A

How should Adamantan-1-ylmethanol (CAS: 770-71-8) be stored?

Adamantan-1-ylmethanol should be stored in a cool, dry, and well-ventilated plac...

770-71-8Adamantan-1-ylmethan...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.