Wavelength dispersion of the local field intensity in silver–gold nanocages

Literature Information

Publication Date 2015-01-30
DOI 10.1039/C4CP04453C
Impact Factor 3.676
Authors

R. Pilot, A. Zoppi, S. Trigari, F. L. Deepak, E. Giorgetti, R. Bozio


View Original

Abstract

This study provides a combined theoretical and experimental analysis of the far-field (extinction) and of the near-field (SERS enhancement) spectral distribution in hollow nanoparticles, that is, silver–gold nanocages (NCs). Chitosan protected NCs have been synthesized by a galvanic replacement-based procedure: their morphological properties and chemical composition have been characterized by TEM, STEM and ICP. NCs were then functionalized with a thiolated organic dye prior to carrying out SERS measurements. Finite Element Method simulations of a single NC have shown that the field enhancement at the excitation wavelength follows the same spectral dependence as the extinction spectrum and, consequently, the SERS enhancement profile, as a function of the excitation wavelength, peaks at higher energy with respect to extinction. The simulated extinction is remarkably narrower than the experimental spectrum of NCs in solution, indicating that the colloidal sample is substantially polydispersed. However, a simple qualitative model that we have developed would suggest that the SERS enhancement profile is blue-shifted with respect to the extinction in the presence of polydispersivity as well. In addition, NC dimers have been simulated: both their extinction and near field-spectra shift to the red when the size of the gap is reduced analogous to what happens with dimers of filled spherical nanoparticles (NPs). In addition, simulations also revealed that a NC dimer is only slightly more efficient in amplifying the field with respect to the isolated NC, and this behavior is peculiar to NCs. In fact, filled spherical NP dimers exhibit a remarkably stronger field enhancement with respect to the isolated NP. By means of Wavelength Scanned SERS, we measured the spectral distribution of the local field in a dispersion of NCs. We observed experimentally that the local field is distributed in the same spectral region as the extinction and that the absolute value of the SERS enhancement factor maintains a low value throughout the range explored (568–800 nm). We propose that the observed correlation between the SERS profile and the extinction is accidental and originates from the limited increase in amplification provided by NC aggregates with respect to isolated NCs.

Related Literature

Revision of the oxygen reduction reaction on N-doped graphenes by grand-canonical DFT

Sergey V. Pavlov, Victoria A. Nikitina, Sergey A. Kislenko

2023-11-23 Paper

DOI: 10.1039/D3CP04517J

Polystyrene-based catalysts with simultaneous Brønsted and Lewis acidity for hydroxymethylfurfural production from starch: molecular weight and solvent effects

Ibeh S. Omodolor, Nkem O. Ofole, Sarah A. Walz, Maria R. Coleman, Ravikumar Gogar, Sridhar Viamajala, Francielle C. F. Marcos

2023-12-05 Paper

DOI: 10.1039/D3SE01164J

Expression of concern: Optimization of a compact layer of TiO2via atomic-layer deposition for high-performance perovskite solar cells

Ahmed Esmail Shalan, Sudhakar Narra, Tomoya Oshikiri, Kosei Ueno, Xu Shi, Hui-Ping Wu, Mahmoud M. Elshanawany, Eric Wei-Guang Diau

2023-11-16 Expression of Concern

DOI: 10.1039/D3SE90087H

Direct thermodynamic characterization of solid-state reactions by isothermal calorimetry

Marija Cvetnić, Robert Šplajt, Edi Topić, Mirta Rubčić, Nikola Bregović

2023-10-27 Paper

DOI: 10.1039/D3CP03933A

First-principles prediction of the thermal conductivity of two configurations of difluorinated graphene monolayer

Ao Chen, Hua Tong, Cheng-Wei Wu, Shi-Yi Li, Pin-Zhen Jia, Wu-Xing Zhou

2023-11-25 Paper

DOI: 10.1039/D3CP04923J

f-Block reactions of metal cations with carbon dioxide studied by inductively coupled plasma tandem mass spectrometry

Richard M Cox, Kali M. Melby, Amanda D. French, Michael J. Rodriguez

2023-12-05 Paper

DOI: 10.1039/D3CP04180H

Tailoring flavin-based photosensitizers for efficient photooxidative coupling of benzylic amines

Huimin Guo, Yang Qiu, Siyu Liu, Xiangyu Zhang, Jianzhang Zhao

2023-11-21 Paper

DOI: 10.1039/D3CP04579J

Contents list

2023-11-21 Front/Back Matter

DOI: 10.1039/D3SE90089D

You might also like

Compound Q&A

How should waste containing 4-Bromo-3-methyl-2-thiophenecarboxylic acid (CAS: 265652-39-9) be handled?

Waste containing 4-Bromo-3-methyl-2-thiophenecarboxylic acid (CAS: 265652-39-9) ...

265652-39-94-Bromo-3-methyl-2-t...
Compound Q&A

What industries use (2S,5S,2'S,5'S)-1,1'-(1,2-Ethanediyl)bis(2,5-dimethylphospholane) (CAS: 136779-26-5)?

(2S,5S,2'S,5'S)-1,1'-(1,2-Ethanediyl)bis(2,5-dimethylphospholane) is primarily u...

136779-26-5(2S,5S,2'S,5'S)-1,1'...
Compound Q&A

What industries use Ethyl 2-(2-bromo-5-fluorophenyl)acetate (CAS: 1214910-61-8)?

Ethyl 2-(2-bromo-5-fluorophenyl)acetate (CAS: 1214910-61-8) is used in the pharm...

1214910-61-8Ethyl 2-(2-bromo-5-f...
Compound Q&A

How is 4-Methyl-2-benzofuran-1,3-dione (CAS: 4792-30-7) typically synthesized?

4-Methyl-2-benzofuran-1,3-dione (CAS: 4792-30-7) can be synthesized through seve...

4792-30-74-Methyl-2-benzofura...
Compound Q&A

What industries use 4,6-Dichloroquinoline-3-carbonitrile (CAS: 936498-04-3)?

4,6-Dichloroquinoline-3-carbonitrile (CAS: 936498-04-3) is used in the pharmaceu...

936498-04-34,6-Dichloroquinolin...
Compound Q&A

What are the main uses of Chloro[tris(para-trifluoromethylphenyl)phosphine]gold(I) (CAS: 385815-83-8)?

Chloro[tris(para-trifluoromethylphenyl)phosphine]gold(I) is primarily used in or...

385815-83-8Chloro[tris(para-tri...
Compound Q&A

Is 2-Bromo-5-nitrofuran (CAS: 823-73-4) safe?

2-Bromo-5-nitrofuran (CAS: 823-73-4) is generally considered safe when handled w...

823-73-42-Bromo-5-nitrofuran
Compound Q&A

How should 5-Bromo-2,3,4-trifluorobenzoic acid (CAS: 212631-85-1) be stored?

5-Bromo-2,3,4-trifluorobenzoic acid should be stored in a cool, dry place away f...

212631-85-15-Bromo-2,3,4-triflu...
Compound Q&A

What are the main uses of Zinc bis(aminoacetate) (CAS: 7214-08-6)?

Zinc bis(aminoacetate) (CAS: 7214-08-6) is primarily used in the pharmaceutical ...

7214-08-6Zinc bis(aminoacetat...
Compound Q&A

How should Adamantan-1-ylmethanol (CAS: 770-71-8) be stored?

Adamantan-1-ylmethanol should be stored in a cool, dry, and well-ventilated plac...

770-71-8Adamantan-1-ylmethan...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.