More stable and more efficient alternatives of Z-907: carbazole-based amphiphilic Ru(ii) sensitizers for dye-sensitized solar cells

Literature Information

Publication Date 2014-10-31
DOI 10.1039/C4CP04120H
Impact Factor 3.676
Authors

Hammad Cheema, Ashraful Islam, Robert Younts, Bhoj Gautam, Idriss Bedja, Ravindra Kumar Gupta, Liyuan Han, Kenan Gundogdu, Ahmed El-Shafei


View Original

Abstract

Here we report two novel amphiphilic Ru(II) heteroleptic bipyridyl complexes, HD-14 and HD-15, compared to previously reported NCSU-10. We have combined the strong electron donor characteristics of carbazole and the hydrophobic nature of different long alkyl chains, C7, C18 and C2 (NCSU-10), tethered to N-carbazole to study their influence on photocurrent, photovoltage and long term stability for dye-sensitized solar cells. Photon harvesting efficiency and electron donating characteristics of carbazole-based ancillary ligands were found to be unaffected by different alkyl chain lengths. However, a slight drop in the Voc of HD-14 and HD-15 was observed compared to that of NCSU-10. It was found by nanosecond flash photolysis transient absorption (TA) measurements that the faster the dye regeneration the higher the photocurrent density response, and the dye regeneration time was found to be 2.6, 3.6, and 3.7 μs for HD-14, HD-15, and N719 dyes, respectively. The difference in the amplitude of the transient absorption (TA) signal of the oxidized dye as measured by femtosecond TA studies is in excellent agreement with the photocurrent generated, which was in the following order HD-14 > HD-15 > N719. Under 1000 h light soaking conditions, HD-15 maintained up to 98% (only 2% loss) of the initial power conversion efficiency compared to 8% loss for HD-14 and 22% loss in the power conversion efficiency for NCSU-10. HD-15 was strikingly stable to light soaking conditions when employed in the presence of an ionic liquid electrolyte, which paves the way for widespread applications of dye-sensitized solar cells with long term stability. The total power conversion efficiency (η) was 9.27% for HD-14 and 9.17% for HD-15 compared to 8.92% for N719.

Related Literature

Towards large amounts of Janusnanoparticles through a protection–deprotection route

Stéphane Reculusa, Franck Pereira, Marie-Hélène Delville, Christophe Mingotaud, Etienne Duguet, Elodie Bourgeat-Lami, Serge Ravaine

2005-10-03 Communication

DOI: 10.1039/B507486J

Characterization of the H2 sensing mechanism of Pd-promoted SnO2 by XAS in operando conditions

Thomas Neisius, Bernard Chenevier, Aleksandre M. Gaskov, Michel Labeau

2005-09-19 Communication

DOI: 10.1039/B509826B

Fluorescence based strategies for genetic analysis

Rohan T. Ranasinghe, Tom Brown

2005-09-30 Feature Article

DOI: 10.1039/B509522K

Sandwich-shaped silver(i) metallomacrocycles encapsulating a XF62− (X = Si, Ge and Sn) anion

Masahiko Maekawa, Susumu Kitagawa, Takayoshi Kuroda-Sowa, Megumu Munakata

2006-03-17 Communication

DOI: 10.1039/B518411H

Front cover

Cover

DOI: 10.1039/B604823B

Assembled bright green fluorescent zinc coordination polymer

Ruibiao Fu, Shengchang Xiang, Shengmin Hu, Longsheng Wang, Yaming Li, Xihe Huang, Xintao Wu

2005-09-22 Communication

DOI: 10.1039/B509695B

Monitoring the formation of TTF dimers by Na+ complexation

Marc Sallé, Jean-Yves Balandier, Franck Le Derf, Eric Levillain, Magali Allain, Pascal Viel, Serge Palacin

2006-03-30 Communication

DOI: 10.1039/B518275A

Supramolecular cruciforms

Warren W. Gerhardt, Anthony J. Zucchero, James N. Wilson, Clinton R. South, Uwe H. F. Bunz, Marcus Weck

2006-03-21 Communication

DOI: 10.1039/B602087A

You might also like

Compound Q&A

What are the main uses of 1H-Indazole-6-carbonitrile (CAS: 141290-59-7)?

1H-Indazole-6-carbonitrile finds applications in pharmaceuticals, where it serve...

141290-59-71H-Indazole-6-carbon...
Compound Q&A

How should waste containing Dioctyl (2E)-2-butenedioate (CAS: 2997-85-5) be handled?

Waste containing Dioctyl (2E)-2-butenedioate (CAS: 2997-85-5) should be collecte...

2997-85-5Dioctyl (2E)-2-buten...
Compound Q&A

What industries use Sodium [(1,2-benzoxazol-3-ylmethyl)sulfonyl]azanide (CAS: 68291-98-5)?

Sodium [(1,2-benzoxazol-3-ylmethyl)sulfonyl]azanide is primarily used in pharmac...

68291-98-5Sodium [(1,2-benzoxa...
Compound Q&A

Are there alternatives to Dimethyl 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-2,6-pyridinedicarboxylate (CAS: 741709-66-0) in synthesis?

Dimethyl 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-2,6-pyridinedicarboxyla...

741709-66-0Dimethyl 4-(4,4,5,5-...
Compound Q&A

How should waste containing 2-Fluoro-6-hydrazinopyridine (CAS: 80714-39-2) be handled?

Waste containing 2-Fluoro-6-hydrazinopyridine (CAS: 80714-39-2) should be manage...

80714-39-22-Fluoro-6-hydrazino...
Compound Q&A

What is 6-Formyl-2-pyridinecarboxylic acid (CAS: 499214-11-8)?

6-Formyl-2-pyridinecarboxylic acid is an organic compound with the molecular for...

499214-11-86-Formyl-2-pyridinec...
900874-91-13-(3,4-dimethoxyphen...
Compound Q&A

How is 9H-Tribenzo[b,d,f]azepine (CAS: 29875-73-8) typically synthesized?

9H-Tribenzo[b,d,f]azepine is typically synthesized via a multi-step process invo...

29875-73-89H-Tribenzo[b,d,f]az...
Compound Q&A

How is 1-Cyclopropyl-7-ethoxy-6-fluoro-8-methoxy-4-oxo-1,4-dihydro-3-quinolinecarboxylic acid (CAS: 1797982-51-4) typically synthesized?

1-Cyclopropyl-7-ethoxy-6-fluoro-8-methoxy-4-oxo-1,4-dihydro-3-quinolinecarboxyli...

1797982-51-41-Cyclopropyl-7-etho...
Compound Q&A

How should waste containing Methyl 3-oxo-1,2,3,4-tetrahydro-6-quinoxalinecarboxylate (CAS: 671820-52-3) be handled?

Waste containing Methyl 3-oxo-1,2,3,4-tetrahydro-6-quinoxalinecarboxylate (CAS: ...

671820-52-3Methyl 3-oxo-1,2,3,4...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.