Reversible addition of the OH radical to p-cymene in the gas phase: multiple adduct formation. Part 2

Literature Information

Publication Date 2014-07-03
DOI 10.1039/C4CP02073A
Impact Factor 3.676
Authors

Paulo Alarcón, Birger Bohn, Marie-Thérèse Rayez, Jean-Claude Rayez


View Original

Abstract

A flash photolysis-resonance fluorescence (FP-RF) system was used to study the p-cymene (PC) + OH reaction at temperatures between 299 and 349 K in helium. Triexponential functions were fitted to groups of observed OH decay curves according to a model considering a reversible addition to form two adducts as thermolabile reservoirs of OH. Compared to Part 1 of this paper, consideration of a second adduct strongly improved the fits to our measurements, and the rate constants for the major pathways were optimized between 299 and 349 K. The Arrhenius expression for the rate constant of the sum of OH addition and H-atom abstraction pathways was found to be kOH = 1.9 × 10−12 exp[(610 ± 210) K/T] cm3 s−1. Rate constants of unimolecular decomposition reactions of the adducts were similar to other aromatic compounds with the following Arrhenius expressions: 1 × 1012 exp[(−7600 ± 800) K/T] s−1 for adduct 1 and 4 × 1011 exp[(−8000 ± 300) K/T] s−1 for adduct 2. Adduct yields increased and decreased with temperature for adduct 1 and 2, respectively, but were similar (∼0.4) around room temperature. Equilibrium constants yielded values for reaction enthalpies and entropies of adduct formations. While for one adduct reasonable agreement was obtained with theoretical predictions, there were significant deviations for the other adduct. This indicates the presence of more than two adduct isomers that were not accounted for in the reaction model. Quantum chemical calculations (DFT M06-2X/6-31G(d,p)) and RRKM kinetics were employed with the aim of clarifying the mechanism of the OH addition to PC. These calculations show that formation of adducts with OH in ortho positions to the isopropyl and methyl substituents is predominant (55% and 24%) to those with OH in ipso positions (21% and 3%). A large fraction (>90%) of the ipso-C3H7 adduct is predicted to react by dealkylation forming p-cresol (in the absence of oxygen) and isopropyl radicals. These theoretical results agree well with the interpretation of the experimental results showing that the two ortho adducts (which appeared as OH reservoirs in the experiment) have been observed.

Related Literature

Corrosion inhibition of copper in aqueous chloride solution by 1H-1,2,3-triazole and 1,2,4-triazole and their combinations: electrochemical, Raman and theoretical studies

Stanley Udochukwu Ofoegbu, Tiago L. P. Galvão, José R. B. Gomes, João Tedim, Helena I. S. Nogueira, M. G. S. Ferreira

2017-02-07 Paper

DOI: 10.1039/C7CP00241F

Inside front cover

Cover

DOI: 10.1039/C7CP90035J

Probing the degradation and homogeneity of embedded perovskite semiconducting layers in photovoltaic devices by Raman spectroscopy

K. E. A. Hooper, H. K. H. Lee, M. J. Newman, S. Meroni, J. Baker, T. M. Watson, W. C. Tsoi

2017-02-02 Paper

DOI: 10.1039/C6CP05123E

Cyclopentadithiophene organic core in small molecule organic solar cells: morphological control of carrier recombination

Rocío Domínguez, Núria F. Montcada, Pilar de la Cruz, Fernando Langa

2016-12-23 Paper

DOI: 10.1039/C6CP08166E

Mechanism of activated chemiluminescence of cyclic peroxides: 1,2-dioxetanes and 1,2-dioxetanones

Ignacio Fdez. Galván, Daniel Roca-Sanjuán, Erick L. Bastos, Wilhelm J. Baader, Roland Lindh

2017-01-03 Paper

DOI: 10.1039/C6CP08154A

Modeling the abnormally slow infiltration rate in mesoporous films

Claudio L. A. Berli, Magalí Mercuri, Martín G. Bellino

2016-12-12 Communication

DOI: 10.1039/C6CP06602J

Low intensity, continuous wave photodoping of ZnO quantum dots – photon energy and particle size effects

Matías E. Aguirre, S. Municoy, M. A. Grela, A. J. Colussi

2017-01-04 Paper

DOI: 10.1039/C6CP06829D

You might also like

Compound Q&A

What are the main uses of (5-Sulfamoyl-3-pyridinyl)boronic acid (CAS: 951233-61-7)?

(5-Sulfamoyl-3-pyridinyl)boronic acid is primarily used in chemical synthesis, p...

951233-61-7(5-Sulfamoyl-3-pyrid...
Compound Q&A

How is Benzyl 2-methyl-2-(methylsulfonyl)-4-pentenoate (CAS: 1942858-50-5) typically synthesized?

Benzyl 2-methyl-2-(methylsulfonyl)-4-pentenoate is typically synthesized via est...

1942858-50-5Benzyl 2-methyl-2-(m...
Compound Q&A

What precautions should be taken when handling 8-Fluoroquinolin-6-ol (CAS: 209353-22-0)?

When handling 8-Fluoroquinolin-6-ol (CAS: 209353-22-0), it is important to use p...

209353-22-08-Fluoroquinolin-6-o...
Compound Q&A

What are the physical and chemical properties of 1,3-Dibromo-5-(2-methyl-2-propanyl)benzene (CAS: 129316-09-2)?

1,3-Dibromo-5-(2-methyl-2-propanyl)benzene (CAS: 129316-09-2) is a crystalline c...

129316-09-21,3-Dibromo-5-(2-met...
Compound Q&A

What industries use Ethyl 7-chloro-4-oxo-1-(1,3-thiazol-2-yl)-1,4-dihydro-1,8-naphthyridine-3-carboxylate (CAS: 174726-87-5)?

Ethyl 7-chloro-4-oxo-1-(1,3-thiazol-2-yl)-1,4-dihydro-1,8-naphthyridine-3-carbox...

174726-87-5Ethyl 7-chloro-4-oxo...
Compound Q&A

What precautions should be taken when handling Delta-7-Avenasterol (CAS: 23290-26-8)?

When handling Delta-7-Avenasterol (CAS: 23290-26-8), it is important to wear app...

23290-26-8Delta-7-Avenasterol
872992-20-6N-({(5R)-3-[3-Fluoro...
Compound Q&A

What precautions should be taken when handling 2-Methyl-2-proanyl 4-[(2-aminophenyl)amino]-1-piperidinecarboxylate (CAS: 79099-00-6)?

When handling 2-Methyl-2-proanyl 4-[(2-aminophenyl)amino]-1-piperidinecarboxylat...

79099-00-62-Methyl-2-propanyl ...
Compound Q&A

What is N-Methyl-4-chlorobenzylamine hydrochloride (CAS: 65542-24-7)?

N-Methyl-4-chlorobenzylamine hydrochloride (CAS: 65542-24-7) is a organic compou...

65542-24-7N-Methyl-4-chloroben...
Compound Q&A

Is [2-(Dodecyloxy)ethoxy]acetic acid (CAS: 27306-90-7) safe?

[2-(Dodecyloxy)ethoxy]acetic acid (CAS: 27306-90-7) is generally considered safe...

27306-90-7[2-(Dodecyloxy)ethox...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.