Corrosion inhibition of copper in aqueous chloride solution by 1H-1,2,3-triazole and 1,2,4-triazole and their combinations: electrochemical, Raman and theoretical studies

Literature Information

Publication Date 2017-02-07
DOI 10.1039/C7CP00241F
Impact Factor 3.676
Authors

Stanley Udochukwu Ofoegbu, Tiago L. P. Galvão, José R. B. Gomes, João Tedim, Helena I. S. Nogueira, M. G. S. Ferreira


View Original

Abstract

Triazoles are well-known organic corrosion inhibitors of copper. 1H-1,2,3-Triazole and 1,2,4-triazole, two very simple molecules with the only difference being the positions of the nitrogen atoms in the triazole ring, were studied in this work as corrosion inhibitors of copper in 50 mM NaCl solution using a set of electrochemical and analytical techniques. The results of electrochemical tests indicate that 1H-1,2,3-triazole exhibited superior inhibitor properties but could not suppress anodic copper dissolution at moderate anodic potentials (>+300 mV SCE), while 1,2,4-triazole, although it exhibited higher anodic currents, suppressed anodic copper dissolution at very anodic potentials. Density functional theory calculations were also performed to interpret the measured data and trends observed in the electrochemical studies. The computational studies considered either the inhibitors isolated in the gaseous phase or adsorbed onto Cu(111) surface models. From the calculations, the mechanisms of the inhibitive effects of both triazoles were established and plausible mechanisms of formation of the protective films on the Cu surface were proposed. The results of this study hold positive implications for research in the areas of catalysis, and copper content control in water purification systems.

Related Literature

Well-defined hydrogen and organofunctional polysiloxanes with spiro-fused siloxane backbones

Takahiro Kawatsu, Keita Fuchise, Katsuhiko Takeuchi, Jun-Chul Choi, Kazuhiko Sato, Kazuhiro Matsumoto

2021-03-18 Paper

DOI: 10.1039/D0PY01503B

Organic–inorganic nanohybrids based on an AIE luminogen-functional polymer and CdTe/ZnS QDs: morphologies, optical properties, and applications

Bingfeng Shi, Jianhua Lü, Ying Liu, Yang Xiao, Changli Lü

2021-06-02 Paper

DOI: 10.1039/D1PY00308A

Regulation of tectonic sequences in chain-folding-directed monodisperse isomeric oligomers precisely tailored by Ugi-hydrosilylation orthogonal cycles

Chao Li, Li Han, Xiping Chen, Xinyu Bao, Qi Sun, Hongwei Ma, Yang Li

2021-05-25 Communication

DOI: 10.1039/D1PY00416F

Front cover

2021-04-20 Cover

DOI: 10.1039/D1PY90055B

The effect of alkyl chain lengths on the red-to-near-infrared emission of boron-fused azomethine conjugated polymers and their film-state stimuli-responsivities

Shunsuke Ohtani, Natsumi Yamada, Masayuki Gon, Kazuo Tanaka, Yoshiki Chujo

2021-04-19 Paper

DOI: 10.1039/D1PY00213A

Outstanding Reviewers for Polymer Chemistry in 2020

2021-05-25 Editorial

DOI: 10.1039/D1PY90058G

RAFT polymerisation of trifluoroethylene: the importance of understanding reverse additions

Marc Guerre, Cédric Totée, Gilles Silly, Olinda Gimello, Bruno Améduri, Jean-François Tahon, Rinaldo Poli, Sophie Barrau, Vincent Ladmiral

2021-03-15 Paper

DOI: 10.1039/D0PY01754J

Detection and evaluation of polymer–polymer interactions in dilute solutions of associating polymers

Georges M. Pavlov, Anna A. Gosteva, Olga V. Okatova, Olga A. Dommes, Irina I. Gavrilova

2021-03-22 Paper

DOI: 10.1039/D0PY01725F

You might also like

Compound Q&A

What precautions should be taken when handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3)?

When handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3), it ...

79206-94-34-(2-Furylmethyl)thi...
Compound Q&A

What precautions should be taken when handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9)?

When handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9), it...

71320-77-94-Chloro-N-[2-(4-mor...
Compound Q&A

How should waste containing 2-[2-(2-Methoxyethoxy)ethoxy]ethyl 4-methylbenzenesulfonate (CAS: 62921-74-8) be handled?

Waste containing this compound (CAS: 62921-74-8) should be handled according to ...

62921-74-82-[2-(2-Methoxyethox...
Compound Q&A

How should waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate be handled?

Waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate should be collected i...

40056-18-6(S)-Methyl 2-amino-3...
166882-70-85-({4-[(2S,4R)-4-Hyd...
Compound Q&A

Are there alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid (CAS: 7312-27-8) in synthesis?

There are several alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid in syn...

7312-27-8(2E)-3-(3,4-Dichloro...
Compound Q&A

How should Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84-9) be stored?

Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84...

925437-84-9Ethyl 6-(2-nitrophen...
Compound Q&A

How should waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) be handled?

Waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) should be coll...

18453-07-12-(1,3-Thiazol-2-yl)...
Compound Q&A

How is Methyl 5-iodo-2-methylbenzoate (CAS: 103440-54-6) typically synthesized?

Methyl 5-iodo-2-methylbenzoate can be synthesized through the iodination of meth...

103440-54-6Methyl 5-iodo-2-meth...
Compound Q&A

How is 5-Chloro[1,2,4]triazolo[1,5-a]pyridine (CAS: 1427399-34-5) typically synthesized?

5-Chloro[1,2,4]triazolo[1,5-a]pyridine is commonly synthesized via the condensat...

1427399-34-55-Chloro[1,2,4]triaz...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.