Significantly enhanced antibacterial activity of TiO2 nanofibers with hierarchical nanostructures and controlled crystallinity
Literature Information
Won Seok Lee, Yang-Seok Park
Recently, there has been increased interest in electrospun-titanium dioxide nanofibers (TiO2 NFs) as antibacterial agents owing to their advantages, such as simple and cost-effective fabrication processes, and high surface areas. However, the photocatalytic effects of TiO2 NFs are relatively low because of their low-ordered crystalline structure, and the antibacterial effect is only effective under UV illumination owing to their large band-gap energy. In this paper, we have demonstrated a significantly enhanced antibacterial activity of hierarchical anatase TiO2 NFs against Staphylococcus aureus in the presence of UV light. Furthermore, the uniform deposition of a large quantity of Ag nanoparticles on the surface of the TiO2 NFs ensured a significant enhancement of the antibacterial performance, even under dark conditions. These results were obtained by exploiting the enhanced photocatalytic effect achieved through control of the crystallinity, as well as the enhanced surface area of the nanomaterials.
Related Literature
Lithium doping on 2D squaraine-bridged covalent organic polymers for enhancing adsorption properties: a theoretical study
Ling Huang, Xianfeng Yi, Anmin Zheng
DOI: 10.1039/C7CP07686J
An ab initio study of Cu-based delafossites as an alternative to nickel oxide in photocathodes: effects of Mg-doping and surface electronic features
Eduardo Schiavo, Vincenzo Barone, Orlando Crescenzi, Ana B. Muñoz-García, Michele Pavone
DOI: 10.1039/C8CP00848E
Calculation of linear and nonlinear optical properties of azobenzene derivatives with Kohn–Sham and coupled-cluster methods
Arun K. Pal, Thomas J. Duignan, Jochen Autschbach
DOI: 10.1039/C7CP08655E
Oxygen-induced high diffusion rate of magnesium dopants in GaN/AlGaN based UV LED heterostructures
Paweł Piotr Michałowski, Sebastian Złotnik, Jakub Sitek, Krzysztof Rosiński, Mariusz Rudziński
DOI: 10.1039/C8CP01470A
“On demand” triggered crystallization of CaCO3 from solute precursor species stabilized by the water-in-oil microemulsion
Teresa Roncal-Herrero, Alejandro Fernandez-Martinez, Adriana Matamoros-Veloza, Roland Kröger
DOI: 10.1039/C8CP00540K
A first-principles study of hydrogen storage capacity based on Li–Na-decorated silicene
Zhe Sheng, Shujing Wu, Xianying Dai, Tianlong Zhao, Yue Hao
DOI: 10.1039/C8CP00722E
Substituent control of the ultrafast twisted intramolecular charge transfer rate in dimethylaminochalcone derivatives
DOI: 10.1039/C7CP08239H
Adsorption of alcohols and hydrocarbons on nonstoichiometric cementite{010} surfaces
David Muñoz Ramo, Stephen J. Jenkins
DOI: 10.1039/C8CP01028E
Effects of CNT size on the desalination performance of an outer-wall CNT slit membrane
Elisa Y. M. Ang, Teng Yong Ng, Rongming Lin, Zishun Liu, K. R. Geethalakshmi
DOI: 10.1039/C8CP01191E
You might also like
What precautions should be taken when handling 2-Chloro-1,2-bis(4-methylphenyl)ethanone (CAS: 71193-32-3)?
When handling 2-Chloro-1,2-bis(4-methylphenyl)ethanone (CAS: 71193-32-3), it is ...
What industries use 4-Ethoxy-3-(5-methyl-4-oxo-7-propyl-1,4-dihydroimidazo[5,1-f][1,2,4]triazin-2-yl)benzenesulfonyl chloride (CAS: 224789-26-8)?
4-Ethoxy-3-(5-methyl-4-oxo-7-propyl-1,4-dihydroimidazo[5,1-f][1,2,4]triazin-2-yl...
How should Methyl 3-Oxo-4-Androsten-17-Carboxylate (CAS: 2681-55-2) be stored?
Methyl 3-Oxo-4-Androsten-17-Carboxylate (CAS: 2681-55-2) should be stored in a c...
What are the main uses of (R)-3-Amino-4-(3-hexylphenylamino)-4-oxobutylphosphonic acid (CAS: 909725-61-7)?
(R)-3-Amino-4-(3-hexylphenylamino)-4-oxobutylphosphonic acid is primarily used i...
What regulatory guidelines apply to 2-Methyl-2-propanyl 3-amino-3-carbamoyl-1-azetidinecarboxylate (CAS: 1254120-14-3)?
2-Methyl-2-propanyl 3-amino-3-carbamoyl-1-azetidinecarboxylate (CAS: 1254120-14-...
Are there alternatives to (E)-4-(tert-Butoxy)-4-oxobut-2-enoic acid (CAS: 135355-96-3) in synthesis?
There are alternative reagents that can be used in synthesis instead of (E)-4-(t...
What are the physical and chemical properties of [2-(3-Chlorophenyl)-1,3-thiazol-4-yl]methanol (CAS: 121202-20-8)?
[2-(3-Chlorophenyl)-1,3-thiazol-4-yl]methanol (CAS: 121202-20-8) is a crystallin...
What is the market or research trend for Methyl (2S)-[(4S)-2,2-dimethyl-1,3-dioxolan-4-yl]{[(4-methylphenyl)sulfonyl]oxy}acetate (CAS: 166249-17-8)?
The market and research trends for Methyl (2S)-[(4S)-2,2-dimethyl-1,3-dioxolan-4...
What is the market or research trend for 1-Bromo-2-isocyanatoethane (CAS: 42865-19-0)?
The market for 1-Bromo-2-isocyanatoethane (CAS: 42865-19-0) is driven by its use...
What are the main uses of 4-Nitro-D-phenylalanine hydrochloride (CAS: 147065-06-3)?
4-Nitro-D-phenylalanine hydrochloride (CAS: 147065-06-3) is primarily used in re...
Source Journal
Analyst

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.










![(1R)-3-Bromo-1,7,7-trimethylbicyclo[2.2.1]heptan-2-one structure (1R)-3-Bromo-1,7,7-trimethylbicyclo[2.2.1]heptan-2-one structure](https://static.chemtradehub.com/structs/102/10293-06-8-dd8a.webp)



