Timescales of water transport in viscous aerosol: measurements on sub-micron particles and dependence on conditioning history

Literature Information

Publication Date 2013-11-29
DOI 10.1039/C3CP54233E
Impact Factor 3.676
Authors

Jessica W. Lu, Andrew M. J. Rickards, Jim S. Walker, Kerry J. Knox, Rachael E. H. Miles, Jonathan P. Reid


View Original

Abstract

Evaporation studies of single aqueous sucrose aerosol particles as a function of relative humidity (RH) are presented for coarse and fine mode particles down into the submicron size range (600 nm < r < 3.0 μm). These sucrose particles serve as a proxy for biogenic secondary organic aerosols that have been shown to exist, under ambient conditions, in an ultraviscous glassy state, which can affect the kinetics of water mass transport within the bulk phase and hinder particle response to changes in the gas phase water content. A counter-propagating Bessel beams (CPBBs) optical trapping setup is employed to monitor the real-time change in the particle radius with RH decreasing from 75% to 5%. The slow-down of the size change upon each RH step and the deviation from the theoretical equilibrium hygroscopic growth curve indicate the onset of glassy behavior in the RH range of 10–40%. Size-dependent effects were not observed within the uncertainty of the measurements. The influence of the drying time below the glass transition RH on the timescale of subsequent water condensation and re-equilibration for sucrose particles is explored by optical tweezers measurements of micron-sized particles (3 μm < r < 6 μm). The timescale for water condensation and re-equilibration is shown to increase with increasing drying time, i.e. the time over which a viscous particle is dried below 5% RH. These studies demonstrate the importance of the history of the particle conditioning on subsequent water condensation and re-equilibration dynamics of ultraviscous and glassy aerosol particles.

Related Literature

Comparison of fast electron transfer kinetics at platinum, gold, glassy carbon and diamond electrodes using Fourier-transformed AC voltammetry and scanning electrochemical microscopy

Robert A. Lazenby, Kiran Bano, Jie Zhang, Alan M. Bond, Julie V. Macpherson, Patrick R. Unwin

2017-03-06 Paper

DOI: 10.1039/C7CP00968B

Bonding-induced thermal transport enhancement across a hard/soft material interface using molecular monolayers

Chao Yuan, Mengyu Huang, Yanhua Cheng, Xiaobing Luo

2017-02-07 Paper

DOI: 10.1039/C7CP00209B

Combined static and dynamic quenching in micellar systems—closed-form integrated rate laws verified using a versatile probe

Tim Kohlmann, Robert Naumann, Christoph Kerzig, Martin Goez

2017-03-01 Paper

DOI: 10.1039/C6CP08491E

Effects of Ge and Sn substitution on the metal–semiconductor transition and thermoelectric properties of Cu12Sb4S13 tetrahedrite

Yasufumi Kosaka, Koichiro Suekuni, Katsuaki Hashikuni, Yohan Bouyrie, Michihiro Ohta

2017-03-06 Paper

DOI: 10.1039/C7CP00351J

Facile synthesis of nanoporous Li1+xV1−xO2@C composites as promising anode materials for lithium-ion batteries

Malay Pramanik, Jaewoo Lee, Toshiaki Takei, Yusuke Ide, Md. Shahriar A. Hossain, Jung Ho Kim

2017-03-20 Paper

DOI: 10.1039/C6CP08827A

Thermodynamic stability of stoichiometric LaFeO3 and BiFeO3: a hybrid DFT study

Eugene Heifets, Joachim Maier

2016-12-20 Paper

DOI: 10.1039/C6CP07986E

Tracking areal lithium densities from neutron activation – quantitative Li determination in self-organized TiO2 nanotube anode materials for Li-ion batteries

E. Portenkirchner, G. Neri, J. Lichtinger, J. Brumbarov, R. Gernhäuser, J. Kunze-Liebhäuser

2017-03-02 Paper

DOI: 10.1039/C7CP00180K

An integrated perspective on RNA aptamer ligand-recognition models: clearing muddy waters

K. McCluskey

2017-02-15 Perspective

DOI: 10.1039/C6CP08798A

You might also like

Compound Q&A

What are the main uses of 1H-Indazole-6-carbonitrile (CAS: 141290-59-7)?

1H-Indazole-6-carbonitrile finds applications in pharmaceuticals, where it serve...

141290-59-71H-Indazole-6-carbon...
Compound Q&A

How should waste containing Dioctyl (2E)-2-butenedioate (CAS: 2997-85-5) be handled?

Waste containing Dioctyl (2E)-2-butenedioate (CAS: 2997-85-5) should be collecte...

2997-85-5Dioctyl (2E)-2-buten...
Compound Q&A

What industries use Sodium [(1,2-benzoxazol-3-ylmethyl)sulfonyl]azanide (CAS: 68291-98-5)?

Sodium [(1,2-benzoxazol-3-ylmethyl)sulfonyl]azanide is primarily used in pharmac...

68291-98-5Sodium [(1,2-benzoxa...
Compound Q&A

Are there alternatives to Dimethyl 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-2,6-pyridinedicarboxylate (CAS: 741709-66-0) in synthesis?

Dimethyl 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-2,6-pyridinedicarboxyla...

741709-66-0Dimethyl 4-(4,4,5,5-...
Compound Q&A

How should waste containing 2-Fluoro-6-hydrazinopyridine (CAS: 80714-39-2) be handled?

Waste containing 2-Fluoro-6-hydrazinopyridine (CAS: 80714-39-2) should be manage...

80714-39-22-Fluoro-6-hydrazino...
Compound Q&A

What is 6-Formyl-2-pyridinecarboxylic acid (CAS: 499214-11-8)?

6-Formyl-2-pyridinecarboxylic acid is an organic compound with the molecular for...

499214-11-86-Formyl-2-pyridinec...
900874-91-13-(3,4-dimethoxyphen...
Compound Q&A

How is 9H-Tribenzo[b,d,f]azepine (CAS: 29875-73-8) typically synthesized?

9H-Tribenzo[b,d,f]azepine is typically synthesized via a multi-step process invo...

29875-73-89H-Tribenzo[b,d,f]az...
Compound Q&A

How is 1-Cyclopropyl-7-ethoxy-6-fluoro-8-methoxy-4-oxo-1,4-dihydro-3-quinolinecarboxylic acid (CAS: 1797982-51-4) typically synthesized?

1-Cyclopropyl-7-ethoxy-6-fluoro-8-methoxy-4-oxo-1,4-dihydro-3-quinolinecarboxyli...

1797982-51-41-Cyclopropyl-7-etho...
Compound Q&A

How should waste containing Methyl 3-oxo-1,2,3,4-tetrahydro-6-quinoxalinecarboxylate (CAS: 671820-52-3) be handled?

Waste containing Methyl 3-oxo-1,2,3,4-tetrahydro-6-quinoxalinecarboxylate (CAS: ...

671820-52-3Methyl 3-oxo-1,2,3,4...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.