Insight into lithium transport in lithium nitridometallate battery materials from muon spin relaxation

Literature Information

Publication Date 2012-11-21
DOI 10.1039/C2CP43318D
Impact Factor 3.676
Authors

Andrew S. Powell, Zlatka Stoeva, James S. Lord, Ronald I. Smith, Duncan H. Gregory, Jeremy J. Titman


View Original

Abstract

Muon spin relaxation and powder neutron diffraction have been combined to study three lithium cobalt nitride battery materials. Neutron diffraction shows that these retain the P6/mmm space group of Li3N with Co located only on Li(1) sites. The lattice parameters vary smoothly with the degree of metal substitution, such that the [Li2N] layers expand while the layer separation contracts, as observed previously for similar series of Cu- and Ni-substituted materials. However, in contrast to the latter, the Li3−x−yCoxN phases exhibit Curie–Weiss paramagnetism and this prevents the use of nuclear magnetic resonance to measure Li+ transport parameters. Therefore, muon spin relaxation has been employed here as an alternative technique to obtain quantitative information about Li+ diffusion. Muon spin relaxation shows that Li+ diffusion in Li3−x−yCoxN is anisotropic with transport confined to the [Li2N] plane at low temperature and exchange between Li(1) and Li(2) sites dominant at high temperature. By a comparison with previous studies some general trends have been established across a range of Cu-, Ni- and Co-substituted materials. For intra-layer diffusion Ea decreases as metal substitution increases and the corresponding expansion of the layers results in a more open pathway for Li+ diffusion. However, an optimal value of x is found with a ≈ 3.69 Å after which the concomitant contraction in layer spacing reduces the polarizability of the lattice framework.

Related Literature

Preparation and characterisation of wheat starch-based aerogels for procyanidin encapsulation to enhance stability

Yu Gao, Hong-Ning Lv, Sheng-Hua Zha, Xiao-Li Sun

2023-11-21 Paper

DOI: 10.1039/D3NJ03311B

Synthesis of a water-based TEOS–PDMS sol–gel coating for hydrophobic cotton and polyester fabrics

Nurul Hidayah Abu Bakar, Wan Norfazilah Wan Ismail, Hartina Mohd Yusop, Noreen Farzuhana Mohd Zulkifli

2023-12-15 Paper

DOI: 10.1039/D3NJ03206J

Injectable organo-hydrogels influenced by click chemistry as a paramount stratagem in the conveyor belt of pharmaceutical revolution

Misba Majood, Radhika Chaurasia, Rupesh, Akanksha Singh, Tapan Dey, Omnarayan Agrawal, Yogesh Kumar Verma, Monalisa Mukherjee

2023-10-09 Perspective

DOI: 10.1039/D3TB01674A

Advancement in total hip implant: a comprehensive review of mechanics and performance parameters across diverse novelties

Md Mohiuddin Soliman, Mohammad Tariqul Islam, Muhammad E. H. Chowdhury, Farayi Musharavati, Touhidul Alam, Norbahiah Misran, Sakib Mahmud, Amith Khandakar

2023-10-11 Review Article

DOI: 10.1039/D3TB01469J

Rational design of copper(i)-doped metal–organic frameworks as dual-functional nanocarriers for combined chemo–chemodynamic therapy

Lijia Yao, Bingquan Chen, Hailong Wu, Yuanjing Cui, Guodong Qian

2023-10-19 Paper

DOI: 10.1039/D3TB01869E

Co–MnO/C nanoparticles derived from MOFs with improved conductivity and reduced volume change for lithium-ion batteries

Yiting Wang, Jie Zheng, Changjian He, Xiaochun Li, Yichuan Rui, Bohejin Tang

2023-11-21 Paper

DOI: 10.1039/D3NJ04872A

Correction: Injectable organo-hydrogels influenced by click chemistry as a paramount stratagem in the conveyor belt of pharmaceutical revolution

Misba Majood, Radhika Chaurasia, Rupesh, Akanksha Singh, Tapan Dey, Omnarayan Agrawal, Yogesh Kumar Verma, Monalisa Mukherjee

2023-10-24 Correction

DOI: 10.1039/D3TB90198J

You might also like

Compound Q&A

Is 6-(3-Fluorophenyl)picolinic acid (CAS: 887982-40-3) safe?

6-(3-Fluorophenyl)picolinic acid is generally considered safe for laboratory use...

887982-40-36-(3-Fluorophenyl)pi...
Compound Q&A

What industries use (3R)-3-Pyrrolidinol (CAS: 2799-21-5)?

(3R)-3-Pyrrolidinol is used in the pharmaceutical industry as a precursor for dr...

2799-21-5(3R)-3-Pyrrolidinol
Compound Q&A

What precautions should be taken when handling (4R,5R)-4,5-Diethoxycarbonyl-2,2-dimethyldioxolane (CAS: 59779-75-8)?

When handling (4R,5R)-4,5-Diethoxycarbonyl-2,2-dimethyldioxolane (CAS: 59779-75-...

59779-75-8(4R,5R)-4,5-Diethoxy...
Compound Q&A

How is 1-(6-Chloroimidazo[1,2-b]pyridazin-3-yl)ethanone (CAS: 90734-71-7) typically synthesized?

1-(6-Chloroimidazo[1,2-b]pyridazin-3-yl)ethanone is often synthesized via a mult...

90734-71-71-(6-Chloroimidazo[1...
Compound Q&A

What is the market or research trend for N-Ethyl-3,4-dimethylbenzylamine (CAS: 39180-83-1)?

The market for N-Ethyl-3,4-dimethylbenzylamine (CAS: 39180-83-1) remains steady,...

39180-83-1N-Ethyl-3,4-dimethyl...
Compound Q&A

What is Tert-butyl 3-(pyrrolidin-1-yl)azetidine-1-carboxylate (CAS: 1019008-21-9)?

Tert-butyl 3-(pyrrolidin-1-yl)azetidine-1-carboxylate is a chemical compound wit...

1019008-21-9Tert-butyl 3-(pyrrol...
Compound Q&A

What regulatory guidelines apply to 1-Bromo-3-chloro-2,4-dimethoxybenzene (CAS: 1228956-93-1)?

1-Bromo-3-chloro-2,4-dimethoxybenzene (CAS: 1228956-93-1) falls under the classi...

1228956-93-11-Bromo-3-chloro-2,4...
Compound Q&A

Is 8-Bromo-2-methyl-3,4-dihydroisoquinolin-1(2H)-one (CAS: 1368622-07-4) safe?

The safety of 8-Bromo-2-methyl-3,4-dihydroisoquinolin-1(2H)-one (CAS: 1368622-07...

1368622-07-48-Bromo-2-methyl-3,4...
Compound Q&A

Is Benzyl [(3S)-2,6-dioxo-3-piperidinyl]carbamate (CAS: 22785-43-9) safe?

Benzyl [(3S)-2,6-dioxo-3-piperidinyl]carbamate is generally safe when handled wi...

22785-43-9Benzyl [(3S)-2,6-dio...
Compound Q&A

How should 1-{[4-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl]sulfonyl}pyrrolidine (CAS: 928657-21-0) be stored?

1-{[4-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl]sulfonyl}pyrrolidine s...

928657-21-01-{[4-(4,4,5,5-Tetra...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.