Microwave absorption in powders of small conducting particles for heating applications

Literature Information

Publication Date 2012-12-19
DOI 10.1039/C2CP43310A
Impact Factor 3.676
Authors

Adrian Porch, Peter P. Edwards


View Original

Abstract

In microwave chemistry there is a common misconception that small, highly conducting particles heat profusely when placed in a large microwave electric field. However, this is not the case; with the simple physical explanation that the electric field (which drives the heating) within a highly conducting particle is highly screened. Instead, it is the magnetic absorption associated with induction that accounts for the large experimental heating rates observed for small metal particles. We present simple principles for the effective heating of particles in microwave fields from calculations of electric and magnetic dipole absorptions for a range of practical values of particle size and conductivity. For highly conducting particles, magnetic absorption dominates electric absorption over a wide range of particle radii, with an optimum absorption set by the ratio of mean particle radius a to the skin depth δ (specifically, by the condition a = 2.41δ). This means that for particles of any conductivity, optimized magnetic absorption (and hence microwave heating by magnetic induction) can be achieved by simple selection of the mean particle size. For weakly conducting samples, electric dipole absorption dominates, and is maximized when the conductivity is approximately σ ≈ 3ωε0 ≈ 0.4 S m−1, independent of particle radius. Therefore, although electric dipole heating can be as effective as magnetic dipole heating for a powder sample of the same volume, it is harder to obtain optimized conditions at a fixed frequency of microwave field. The absorption of sub-micron particles is ineffective in both magnetic and electric fields. However, if the particles are magnetic, with a lossy part to their complex permeability, then magnetic dipole losses are dramatically enhanced compared to their values for non-magnetic particles. An interesting application of this is the use of very small magnetic particles for the selective microwave heating of biological samples.

Related Literature

Quantitative assessment of human whole blood RNA as a potential biomarker for infectious disease

Paul Dickinson, Thorsten Forster, Mizanur Khondoker, Marie Craigon, Alan Ross, Petter Storm, Stewart Burgess, Paul Lacaze, Benjamin J. Stenson, Peter Ghazal

2007-10-31 Paper

DOI: 10.1039/B707122C

Modified secured principal component regression for detection of unexpected chromatographic features in herbal fingerprints

Yun Hu, Yi-Zeng Liang, Pei-Shan Xie, Yukihiro Ozaki

2006-01-23 Paper

DOI: 10.1039/B513365C

VideoAFM—a new tool for high speed surface analysis

Jamie K. Hobbs, Cvetelin Vasilev, Andrew D. L. Humphris

2005-11-11 Paper

DOI: 10.1039/B511330J

Back cover

Front/Back Matter

DOI: 10.1039/B718700A

NMR-based screening: a powerful tool in fragment-based drug discovery

Murray Coles

2006-05-05 Book Chapter

DOI: 10.1039/B709658P

Back cover

Cover

DOI: 10.1039/C3AN90011H

Diffusional protection of electrode surfaces using regular arrays of immobilised droplets: overcoming interferences in electroanalysis

Andrew O. Simm, Olga Ordeig, Javier del Campo, Francesc Xavier Muñoz, Richard G. Compton

2006-08-02 Communication

DOI: 10.1039/B607888E

Bead injection for biomolecular assays: Affinity chromatography enhanced by bead injection spectroscopy‡

Yan Gutzman, Andrea D. Carroll, Jaromir Ruzicka

2006-06-06 Paper

DOI: 10.1039/B605112J

Development and optimization of a lab-on-a-chip device for the measurement of trace nitrogen dioxide gas in the atmosphere

Yoshimasa Takabayashi, Michihisa Uemoto, Kenjiro Aoki, Tamao Odake, Takashi Korenaga

2006-02-07 Paper

DOI: 10.1039/B513999F

You might also like

Compound Q&A

How should waste containing (6-Bromo-2-naphthyl)oxy](dimethyl)(2-methyl-2-propanyl)silane be handled?

Waste containing (6-Bromo-2-naphthyl)oxy](dimethyl)(2-methyl-2-propanyl)silane (...

100751-65-3[(6-Bromo-2-naphthyl...
Compound Q&A

How is 7-Fluoro-4-isoquinolinecarboxylic acid (CAS: 1841081-40-0) typically synthesized?

7-Fluoro-4-isoquinolinecarboxylic acid can be synthesized via a multi-step proce...

1841081-40-07-Fluoro-4-isoquinol...
Compound Q&A

What are the physical and chemical properties of 2,3,5,6-Tetrabromothieno[3,2-b]thiophene (CAS: 124638-53-5)?

2,3,5,6-Tetrabromothieno[3,2-b]thiophene is a crystalline compound with a high m...

124638-53-52,3,5,6-Tetrabromoth...
Compound Q&A

Is 1-[4-(Benzylamino)-7,8-dihydro-5H-pyrano[4,3-d]pyrimidin-2-yl]-2-methyl-1H-indole-4-carboxamide (CAS: 1542705-92-9) safe?

1-[4-(Benzylamino)-7,8-dihydro-5H-pyrano[4,3-d]pyrimidin-2-yl]-2-methyl-1H-indol...

1542705-92-91-[4-(Benzylamino)-7...
Compound Q&A

What is the market or research trend for imidazo[5,1-d]-1,2,3,5-tetrazine-8-carboxylic acid, 3,4-dihydro-3-methyl-4-oxo- (CAS: 113942-30-6)?

The market for imidazo[5,1-d]-1,2,3,5-tetrazine-8-carboxylic acid, 3,4-dihydro-3...

113942-30-6Imidazo[5,1-d]-1,2,3...
Compound Q&A

What is 3-(Triisopropylsilyl)propiolaldehyde (CAS: 163271-80-5)?

3-(Triisopropylsilyl)propiolaldehyde is a synthetic organic compound with the CA...

163271-80-53-(Triisopropylsilyl...
Compound Q&A

What regulatory guidelines apply to 6-Nitro-2H-1,4-benzoxazin-3(4H)-one (CAS: 81721-87-1)?

6-Nitro-2H-1,4-benzoxazin-3(4H)-one (CAS: 81721-87-1) is subject to various regu...

81721-87-16-Nitro-2H-1,4-benzo...
Compound Q&A

How should waste containing (3-Fluorophenyl)(4-{[(2-methyl-2-propanyl)oxy]carbonyl}-1-piperazinyl)acetic acid (CAS: 885272-91-3) be handled?

Waste containing (3-Fluorophenyl)(4-{[(2-methyl-2-propanyl)oxy]carbonyl}-1-piper...

885272-91-3(3-Fluorophenyl)(4-{...
Compound Q&A

What are the physical and chemical properties of N,N'-4,4'-Biphenyldiyldiisonicotinamide (CAS: 55119-40-9)?

N,N'-4,4'-Biphenyldiyldiisonicotinamide is a white crystalline solid with a mole...

55119-40-9N,N'-4,4'-Biphenyldi...
Compound Q&A

What industries use 6-Bromo-8-fluoro-2-quinazolinol (CAS: 1036756-15-6)?

6-Bromo-8-fluoro-2-quinazolinol is primarily used in the pharmaceutical industry...

1036756-15-66-Bromo-8-fluoro-2-q...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.