Infra-red imaging of bulk water and water–solid interfaces under stable and metastable conditions
Literature Information
Lionel Mercury, Paul Dumas
Superheated water has been studied by infrared spectroscopy to examine whether the special ability of liquid water to undergo such a metastable state corresponds to the development of peculiar inter-molecular networking under tension. As the best technique to superheat water is to trap the liquid inside micro-cavities in solids (the so-called “fluid inclusions”), the role of the water–solid interfaces to stabilize the adjoining liquid is also explored with the same infra-red micro-spectroscopy tool. The key signal is the intra-molecular OH stretching band, sensitive to the networking in the probed material. The sample of choice is liquid water occluded inside a quartz cavity of micrometric size, synthesized in laboratory from pure quartz and milli-Q water. The stretching band of the superheated water shows no significant spectral difference from that of a bulk “normal” water, which means that the molecular properties of the superheating liquid are quite similar to those of the stable bulk liquid. Liquid water is readily “superheatable” but retains its “normality” under these special conditions. Additionally, this result establishes a firm ground to justify that the properties of the former are predicted extrapolating the usual (though empirical) equation of state of the latter. The infra-red signals of the water–solid interfaces are more complex. The water–solid interfaces blue-shift the signal, affecting differently the three sub-bands of the OH-stretching. This effect was unexpected since the micro-IR spectroscopy probes volume beyond what is classically assigned for the interfacial properties. In addition, the interfacial signature is clearer under superheating than under the saturation conditions, which offers an interesting (and unexpected) way to interpret the special stability of the occluded metastable water. These encouraging results give confidence on the potentialities of the high-resolution micro-spectroscopy to get insights into the molecular basis of macroscopic properties.
Related Literature
Structural phase transformation and microwave dielectric studies of SmNb1−x(Si1/2Mo1/2)xO4 compounds with fergusonite structure
S. D. Ramarao, V. R. K. Murthy
DOI: 10.1039/C5CP00569H
A new diluted magnetic semiconductor based on the expanded phase of ZnS: surmounting the random distribution of magnetic impurities
Xinqiang Wang, Hengjiang Zhu
DOI: 10.1039/C4CP05739B
Investigation of thermal evolution of copper nanoclusters encapsulated in carbon nanotubes: a molecular dynamics study
Hamed Akbarzadeh, Mohsen Abbaspour, Sirous Salemi, Mousareza Abroodi
DOI: 10.1039/C5CP01294E
Bringing light into the dark triplet space of molecular systems
Jing Ge, Zhigang Geng, Shenlong Jiang, Kaili Fan, Zhenkun Guo, Jiahua Hu, Zongwei Chen
DOI: 10.1039/C5CP00323G
Coherent resonance of quantum plasmons in the graphene–gold cluster hybrid system
Chikang Li
DOI: 10.1039/C4CP05049E
Experimental and computational study of solvent effects on one- and two-photon absorption spectra of chlorinated harmines
Dalibor Hršak, Lotte Holmegaard, Anton S. Poulsen, Nanna H. List, Jacob Kongsted, M. Paula Denofrio, Rosa Erra-Balsells, Franco M. Cabrerizo, Ove Christiansen, Peter R. Ogilby
DOI: 10.1039/C5CP00773A
Low temperature (550–700 K) oxidation pathways of cyclic ketones: dominance of HO2-elimination channels yielding conjugated cyclic coproducts
Adam M. Scheer, Oliver Welz, Subith S. Vasu, David L. Osborn, Craig A. Taatjes
DOI: 10.1039/C4CP06097K
Alternative mechanisms for O2 release and O–O bond formation in the oxygen evolving complex of photosystem II
Per E. M. Siegbahn
DOI: 10.1039/C5CP00138B
An experimental and theoretical study of the photoisomerization and thermal reversion on 5-arylmethylene-2-thioxoimidazolidin-4-one
A. J. Pepino, M. A. Burgos Paci, W. J. Peláez, G. A. Argüello
DOI: 10.1039/C4CP04748F
Composition-dependent buckling behaviour of hybrid boron nitride–carbon nanotubes
Jin Zhang, S. A. Meguid
DOI: 10.1039/C5CP00914F
You might also like
How should waste containing N-Methoxy-N-methyl-1,3-thiazole-5-carboxamide (CAS: 898825-89-3) be handled?
Waste containing N-Methoxy-N-methyl-1,3-thiazole-5-carboxamide (CAS: 898825-89-3...
How should N-(4-Biphenylyl)dibenzo[b,d]furan-4-amine (CAS: 1318338-47-4) be stored?
N-(4-Biphenylyl)dibenzo[b,d]furan-4-amine should be stored in a tightly sealed c...
What is the market or research trend for 3-Acetamido-5-amino-2,4,6-triiodobenzoic acid (CAS: 1713-07-1)?
The market for 3-Acetamido-5-amino-2,4,6-triiodobenzoic acid (CAS: 1713-07-1) is...
How should Benzyl 2-O-acetyl-3,4,6-tri-O-benzyl-beta-D-galactopyranoside (CAS: 61820-03-9) be stored?
Benzyl 2-O-acetyl-3,4,6-tri-O-benzyl-beta-D-galactopyranoside (CAS: 61820-03-9) ...
What regulatory guidelines apply to 2-Ethylpiperazine dihydrochloride (CAS: 438050-52-3)?
2-Ethylpiperazine dihydrochloride (CAS: 438050-52-3) is regulated under the Glob...
What regulatory guidelines apply to 1,1'-[1,3-Phenylenebis(methylene)]bis(3-methyl-1H-pyrrole-2,5-dione) (CAS: 119462-56-5)?
1,1'-[1,3-Phenylenebis(methylene)]bis(3-methyl-1H-pyrrole-2,5-dione) (CAS: 11946...
Are there alternatives to 5-Fluoro-2-(1-pyrrolidinyl)pyridine (CAS: 1287217-79-1) in synthesis?
Several alternatives can be used in the synthesis of 5-Fluoro-2-(1-pyrrolidinyl)...
What precautions should be taken when handling 1-((2R,3R,4R,5R)-5-((bis(4-methoxyphenyl)(phenyl)methoxy)methyl)-4-hydroxy-3-methoxytetrahydrofuran-2-yl)-5-methylpyrimidine-2,4(1H,3H)-dione (CAS: 153631-19-7)?
Proper personal protective equipment (PPE) must be worn when handling this compo...
What precautions should be taken when handling 6-Bromoimidazo[1,2-a]pyridin-8-amine (CAS: 676371-00-9)?
When handling 6-Bromoimidazo[1,2-a]pyridin-8-amine, it is important to wear appr...
Are there alternatives to (2S,4R)-4-(4-Nitrobenzyl)pyrrolidine-2-carboxylic acid hydrochloride (CAS: 1049740-22-8) in synthesis?
Alternatives to (2S,4R)-4-(4-Nitrobenzyl)pyrrolidine-2-carboxylic acid hydrochlo...
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.














![2-Methylbenzo[h]quinoline structure 2-Methylbenzo[h]quinoline structure](https://static.chemtradehub.com/structs/605/605-88-9-ac43.webp)