Wave packet calculations on the effect of the femtosecond pulse width in the time-resolved photodissociation of CH3I in the A-band

Literature Information

Publication Date 2010-11-25
DOI 10.1039/C0CP01508C
Impact Factor 3.676
Authors

A. García-Vela, L. Bañares


View Original

Abstract

The effect of changing the temporal width of the pump and probe pulses in the time-resolved photodissociation of CH3I in the A-band has been investigated using multisurface nonadiabatic wave packet calculations. The effect is analyzed by examining properties like the photodissociation reaction times and the CH3 fragment vibrational and rotational distributions, by using four different widths of the pump and probe pulses, namely pulses with full-width-at-half-maximum of 100, 50, 20, and 10 fs. Simulations are carried out for two different excitation wavelengths, 295 and 230 nm, located to the red and to the blue of the maximum of the absorption spectrum, in order to explore possible effects of the excitation wavelength. The reaction times are found to decrease significantly with decreasing pulse temporal width. The times associated with the CH3 + I*(2P1/2) dissociation channels decrease more remarkably than those of the CH3 + I(2P3/2) channels. The results indicate that for excitation wavelengths located to the blue of the absorption spectrum maximum the effect of changing the pulse width is less pronounced than for wavelengths to the red of the spectrum maximum. On the contrary, the CH3 vibrational and rotational distributions show little variation upon large changes in the pulse width. The trends found are explained in terms of the changes in the spectral bandwidth of the pulses and of the shape and slope of the absorption spectrum at the different excitation wavelengths.

Related Literature

Donor–acceptor conjugated ladder polymer via aromatization-driven thermodynamic annulation

Jongbok Lee, Alexander J. Kalin, Chenxu Wang, Julia T. Early, Mohammed Al-Hashimi

2018-01-24 Paper

DOI: 10.1039/C7PY02059G

Manipulation of polymer branching density in phosphine-sulfonate palladium and nickel catalyzed ethylene polymerization

Bangpei Yang, Shuoyan Xiong, Changle Chen

2017-09-25 Paper

DOI: 10.1039/C7PY01281K

The fabrication of amphiphilic double dynamers for responsive Pickering emulsifiers

Ting Zeng, Duanguang Yang, Chong Cheng

2018-01-08 Paper

DOI: 10.1039/C7PY02067H

Polymer brush guided templating on well-defined rod-like cellulose nanocrystals

Ville Hynninen, Antoine Niederberger, André H. Gröschel

2017-11-24 Paper

DOI: 10.1039/C7PY01814B

Thermo- and redox-responsive dendronized polymer hydrogels

Xiacong Zhang, Yu Yin, Jiatao Yan, Afang Zhang

2018-01-10 Paper

DOI: 10.1039/C7PY01284E

Front cover

Cover

DOI: 10.1039/C7PY90170D

Synthesis of a sequence-controlled in-chain alkynyl/tertiary amino dual-functionalized terpolymer via living anionic polymerization

Lincan Yang, Hongwei Ma, Li Han, Xinyu Hao, Pibo Liu, Heyu Shen, Yang Li

2017-11-29 Paper

DOI: 10.1039/C7PY01837A

Polyetheramine (PEA): a versatile platform to tailor the properties of hydrogels via H-bonding interactions

Changxu Zhang, Zhiyong Liu, Xinhui Zhang, Zixing Shi, Hongjie Xu, Xiaodong Ma, Jie Yin, Ming Tian

2017-07-25 Paper

DOI: 10.1039/C7PY01105A

Squaramide and amine binary H-bond organocatalysis in polymerizations of cyclic carbonates, lactones, and lactides

Jingjing Liu, Jiaxi Xu, Zhenjiang Li, Songquan Xu, Xin Wang, Haixin Wang, Tianfo Guo, Yu Gao, Lei Zhang, Kai Guo

2017-10-31 Paper

DOI: 10.1039/C7PY01671A

Recyclable heat-resisting polymer poly(ether azaindole ketone)-H+via hydrogen bonding crosslinking

Q. Yin, Y. Peng, S. Zhang, F. Zhu, W. Li, K. Du

2018-02-07 Communication

DOI: 10.1039/C7PY02097J

You might also like

Compound Q&A

What precautions should be taken when handling lithium chloride hydrate (1:1:1) (CAS: 16712-20-2)?

When handling lithium chloride hydrate (1:1:1) (CAS: 16712-20-2), it is importan...

16712-20-2Lithium chloride hyd...
Compound Q&A

Is 4-(4H-1,2,4-Triazol-4-yl)piperidine (CAS: 690261-92-8) safe?

4-(4H-1,2,4-Triazol-4-yl)piperidine is generally considered safe for use in phar...

690261-92-84-(4H-1,2,4-Triazol-...
Compound Q&A

How should waste containing 1,3-Thiazole-2-carboxamide (CAS: 16733-85-0) be handled?

Waste containing 1,3-Thiazole-2-carboxamide (CAS: 16733-85-0) should be collecte...

16733-85-01,3-Thiazole-2-carbo...
Compound Q&A

What regulatory guidelines apply to 5-(Difluoromethyl)-2-fluorobenzonitrile (CAS: 934175-58-3)?

5-(Difluoromethyl)-2-fluorobenzonitrile (CAS: 934175-58-3) is subject to regulat...

934175-58-35-(Difluoromethyl)-2...
Compound Q&A

How is Methyl 3-acetamido-2-thiophenecarboxylate (CAS: 22288-79-5) typically synthesized?

Methyl 3-acetamido-2-thiophenecarboxylate can be synthesized by the reaction of ...

22288-79-5Methyl 3-acetamido-2...
Compound Q&A

What is 4-Isoquinolinecarbonitrile (CAS: 34846-65-6)?

4-Isoquinolinecarbonitrile is a chemical compound with the CAS number 34846-65-6...

34846-65-64-Isoquinolinecarbon...
Compound Q&A

How should Methyl 1H-1,2,3-triazole-4-carboxylate (CAS: 877309-59-6) be stored?

Store Methyl 1H-1,2,3-triazole-4-carboxylate (CAS: 877309-59-6) in a cool, dry p...

877309-59-6Methyl 1H-1,2,3-tria...
Compound Q&A

What regulatory guidelines apply to 6-Bromo[1,3]thiazolo[5,4-b]pyridin-2-amine (CAS: 1160791-13-8)?

6-Bromo[1,3]thiazolo[5,4-b]pyridin-2-amine (CAS: 1160791-13-8) is subject to the...

1160791-13-86-Bromo[1,3]thiazolo...
Compound Q&A

Is (2S,3S)-2-Ammonio-3-(3,4-dihydroxyphenyl)-3-hydroxypropanoate (CAS: 23651-95-8) safe?

(2S,3S)-2-Ammonio-3-(3,4-dihydroxyphenyl)-3-hydroxypropanoate (CAS: 23651-95-8) ...

23651-95-8(2S,3S)-2-Ammonio-3-...
Compound Q&A

What are the physical and chemical properties of 7-bromo-3-methyl-3,4-dihydroquinazolin-4-one (CAS: 1293987-84-4)?

7-Bromo-3-methyl-3,4-dihydroquinazolin-4-one is a solid with a crystalline form....

1293987-84-47-bromo-3-methyl-3,4...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.