Fundamental studies of methanol synthesis from CO2 hydrogenation on Cu(111), Cuclusters, and Cu/ZnO(000)

Literature Information

Publication Date 2010-06-21
DOI 10.1039/C001484B
Impact Factor 3.676
Authors

Yixiong Yang, Jaime Evans, Jose A. Rodriguez, Ping Liu


View Original

Abstract

A combination of experimental and theoretical methods were employed to investigate the synthesis of methanol via CO2 hydrogenation (CO2 + 3H2 → CH3OH + H2O) on Cu(111) and Cu nanoparticle surfaces. High pressure reactivity studies show that Cu nanoparticles supported on a ZnO(000) single crystal exhibit a higher catalytic activity than the Cu(111) planar surface. Complementary density functional theory (DFT) calculations of methanol synthesis were also performed for a Cu(111) surface and unsupported Cu29 nanoparticles, and the results support a higher activity for Cu nanoparticles. The DFT calculations show that methanol synthesis on Cu surfaces proceeds through a formate intermediate and the overall reaction rate is limited by both formate and dioxomethylene hydrogenation. Moreover, the superior activity of the nanoparticle is associated with its fluxionality and the presence of low-coordinated Cu sites, which stabilize the key intermediates, e.g. formate and dioxomethylene, and lower the barrier for the rate-limiting hydrogenation process. The reverse water-gas-shift (RWGS) reaction (CO2 + H2 → CO + H2O) was experimentally observed to compete with methanol synthesis and was also considered in our DFT calculations. In agreement with experiment, the rate of the RWGS reaction on Cu nanoparticles is estimated to be ∼2 orders of magnitude faster than methanol synthesis at T = 573 K. The experiments and calculations also indicate that CO produced by the fast RWGS reaction does not undergo subsequent hydrogenation to methanol, but instead simply accumulates as a product. Methanol production from CO hydrogenation via the RWGS pathway is hindered by the first hydrogenation of CO to formyl, which is not stable and prefers to dissociate into CO and H atoms on Cu. Our calculated results suggest that the methanol yield over Cu-based catalysts could be improved by adding dopants or promoters which are able to stabilize formyl species or facilitate the hydrogenation of formate and dioxomethylene.

Related Literature

Breaking the size constraint for nano cages using annular patchy particles

Vikki Anand Varma, Simmie Jaglan, Mohd Yasir Khan, Sujin B. Babu

2023-12-07 Paper

DOI: 10.1039/D3CP03681B

The effect of temperature and oxygen partial pressure on the concentration of iron and manganese ions in La1/3Sr2/3Fe1−xMnxO3−δ

Sergey S. Nikitin, Alexander D. Koryakov, Elizaveta A. Antipinskaya, Mikhail V. Patrakeev

2023-12-15 Paper

DOI: 10.1039/D3CP05421G

The controlled engineering of surface oxygen defects on Bi2Zr2O7 compounds for catalytic soot combustion by adjusting the preparation methods

Shijing Zhang, Xiaohui Feng, Zekai Xu, Yuting Li, Ping Wang, Jiating Shen, Junwei Xu, Xianglan Xu, Xiuzhong Fang, Xiang Wang

2023-11-24 Paper

DOI: 10.1039/D3CP04104B

Sufficient driving force for quinoidal isoindigo-based diradicaloids with tunable diradical characters

Li Shen, Xiaobo Gao, Zhanqing Chang, Changhao Zhang, Yue Li, Jitao Lu, Qingguo Meng, Qian Wu

2023-12-13 Paper

DOI: 10.1039/D3CP05199D

Heat-transfer enhancement and optimization design of a roadway with typical angles using field synergy theory

Yongliang Zhang, Xilong Zhang, Mingjie Li, Yunfei Liu, Zhen Hu

2023-11-21 Paper

DOI: 10.1039/D3SE00989K

Carbon doped hexagonal boron nitride as an efficient metal-free catalyst for NO capture and reduction

Jiali Nie, Ying Li, Dongyue Gao, Yi Fang, Jing Lin, Chengchun Tang, Zhonglu Guo

2023-12-15 Paper

DOI: 10.1039/D3CP04718K

Analysing the stability of He-filled hydrates: how many He atoms fit in the sII crystal?

Raquel Yanes-Rodríguez, Rita Prosmiti

2023-12-01 Paper

DOI: 10.1039/D3CP05410A

A novel 2D intrinsic metal-free ferromagnetic semiconductor Si3C8 monolayer

Chengyong Zhong, Shuo Li

2023-12-05 Paper

DOI: 10.1039/D3CP05005J

You might also like

Compound Q&A

How should waste containing N-Methoxy-N-methyl-1,3-thiazole-5-carboxamide (CAS: 898825-89-3) be handled?

Waste containing N-Methoxy-N-methyl-1,3-thiazole-5-carboxamide (CAS: 898825-89-3...

898825-89-3N-Methoxy-N-methyl-1...
Compound Q&A

How should N-(4-Biphenylyl)dibenzo[b,d]furan-4-amine (CAS: 1318338-47-4) be stored?

N-(4-Biphenylyl)dibenzo[b,d]furan-4-amine should be stored in a tightly sealed c...

1318338-47-4N-(4-Biphenylyl)dibe...
Compound Q&A

What is the market or research trend for 3-Acetamido-5-amino-2,4,6-triiodobenzoic acid (CAS: 1713-07-1)?

The market for 3-Acetamido-5-amino-2,4,6-triiodobenzoic acid (CAS: 1713-07-1) is...

1713-07-13-Acetamido-5-amino-...
Compound Q&A

How should Benzyl 2-O-acetyl-3,4,6-tri-O-benzyl-beta-D-galactopyranoside (CAS: 61820-03-9) be stored?

Benzyl 2-O-acetyl-3,4,6-tri-O-benzyl-beta-D-galactopyranoside (CAS: 61820-03-9) ...

61820-03-9Benzyl 2-O-acetyl-3,...
Compound Q&A

What regulatory guidelines apply to 2-Ethylpiperazine dihydrochloride (CAS: 438050-52-3)?

2-Ethylpiperazine dihydrochloride (CAS: 438050-52-3) is regulated under the Glob...

438050-52-32-Ethylpiperazine di...
Compound Q&A

What regulatory guidelines apply to 1,1'-[1,3-Phenylenebis(methylene)]bis(3-methyl-1H-pyrrole-2,5-dione) (CAS: 119462-56-5)?

1,1'-[1,3-Phenylenebis(methylene)]bis(3-methyl-1H-pyrrole-2,5-dione) (CAS: 11946...

119462-56-51,1'-[1,3-Phenyleneb...
Compound Q&A

Are there alternatives to 5-Fluoro-2-(1-pyrrolidinyl)pyridine (CAS: 1287217-79-1) in synthesis?

Several alternatives can be used in the synthesis of 5-Fluoro-2-(1-pyrrolidinyl)...

1287217-79-15-Fluoro-2-(1-pyrrol...
Compound Q&A

What precautions should be taken when handling 6-Bromoimidazo[1,2-a]pyridin-8-amine (CAS: 676371-00-9)?

When handling 6-Bromoimidazo[1,2-a]pyridin-8-amine, it is important to wear appr...

676371-00-96-Bromoimidazo[1,2-a...
Compound Q&A

Are there alternatives to (2S,4R)-4-(4-Nitrobenzyl)pyrrolidine-2-carboxylic acid hydrochloride (CAS: 1049740-22-8) in synthesis?

Alternatives to (2S,4R)-4-(4-Nitrobenzyl)pyrrolidine-2-carboxylic acid hydrochlo...

1049740-22-8(2S,4R)-4-(4-Nitrobe...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.