High-resolution 17O double-rotation NMR characterization of ring and non-ring oxygen in vitreous B2O3

Literature Information

Publication Date 2009-06-22
DOI 10.1039/B906501F
Impact Factor 3.676
Authors

Alan Wong, Andy P. Howes, Ben Parkinson, Tiit Anupõld, Ago Samoson, Diane Holland, Ray Dupree


View Original

Abstract

The application of double rotation (DOR) NMR to crystalline materials (both inorganic and organic) has made tremendous strides in providing site-specific information about materials in recent years. However 17O DOR has yet to demonstrate its potential in disordered materials such as glasses. In the present study, we have successfully recorded high resolution 17O DOR spectra of vitreous B2O3 (v-B2O3), a highly effective glass-forming oxide of considerable technological importance. Two distinct oxygen sites are resolved and a complete set of 17O NMR parameters were determined from the DOR spectra. These were assigned to oxygen atoms in the planar boroxol ring [B3O6] and in the non-boroxol [BO3] groups which share oxygen with the ring boron atoms. This assignment was based on the similarity of all of their 17O parameters with those found by DFT calculation for caesium enneaborate, Cs2O·9B2O3, which has two boroxol rings in its structure. The boroxol ring oxygens have a more positive chemical shift, a larger shift anisotropy and a smaller electric field gradient than non ring oxygens (OR: δiso = 100 ± 1 ppm, span = 180 ± 20 ppm, skew = −0.4 ± 0.1, Pq = 5.0 ± 0.2 MHz; ONR: δiso = 86 ± 1 ppm, span = 100 ± 20 ppm, skew = 0.1 ± 0.1, Pq = 5.7 ± 0.2 MHz). The relative proportions of the two sites in v-B2O3 are ∼1 : 1, as expected if all three boron atoms in the boroxol ring are each connected to one oxygen in a linking [BO3] group and there are very few [BO3]–[BO3] linkages. We see no evidence for a third oxygen site such as has been reported in an earlier study of v-B2O3. This work demonstrates the potential of 17O DOR to provide site-specific information in disordered materials.

Related Literature

Nucleic acid sensor for M. tuberculosis detection based on surface plasmon resonance

Kavita Arora, Sunil K. Arya, Pratima R. Solanki, M. Iwamoto, Harpal Singh, B. D. Malhotra

2008-08-05 Paper

DOI: 10.1039/B808225A

Back matter

Front/Back Matter

DOI: 10.1039/B816943H

Direct electrical detection of antigen–antibody binding on diamond and silicon substrates using electrical impedance spectroscopy

Wensha Yang, James E. Butler, John N. Russell, Jr., Robert J. Hamers

2007-01-17 Paper

DOI: 10.1039/B612201A

Preparation of polyhedral oligomeric silsesquioxane based hybrid monoliths by thiol-ene click chemistry for capillary liquid chromatography

Shufen Shen, Fanggui Ye, Cong Zhang, Yuhao Xiong, Linjing Su, Shulin Zhao

2014-09-29 Paper

DOI: 10.1039/C4AN01668H

3D printed metal columns for capillary liquid chromatography

S. Sandron, B. Heery, V. Gupta, D. A. Collins, E. P. Nesterenko, P. N. Nesterenko, M. Talebi, S. Beirne, F. Thompson, G. G. Wallace, D. Brabazon, F. Regan, B. Paull

2014-09-30 Communication

DOI: 10.1039/C4AN01476F

Self-assembled multilayer of gold nanoparticles for amplified electrochemical detection of cytochromec

Jing Zhao, Xiaoli Zhu, Ting Li, Genxi Li

2008-07-25 Paper

DOI: 10.1039/B806588H

Integrated GC–MS and LC–MS plasma metabonomics analysis of ankylosing spondylitis

Peng Gao, Chen Lu, Xiang Li, Hongwei Kong, Peiyuan Yin, Xin Lu, Aiping Lu, Guowang Xu

2008-07-28 Paper

DOI: 10.1039/B807369D

A quantum dot–lucigenin probe for Cl−

Maria Jose Ruedas-Rama, Elizabeth A. H. Hall

2008-08-01 Paper

DOI: 10.1039/B801507D

Fiber Bragg grating photoacoustic detector for liquid chromatography

Qingxin Yang, Hans-Peter Loock, Igor Kozin, David Pedersen

2008-09-11 Paper

DOI: 10.1039/B806068A

ATP detection using a label-free DNA aptamer and a cationic tetrahedralfluorene

Yanyan Wang, Bin Liu

2008-08-06 Paper

DOI: 10.1039/B806908E

You might also like

Compound Q&A

What precautions should be taken when handling 2-Chloro-1,2-bis(4-methylphenyl)ethanone (CAS: 71193-32-3)?

When handling 2-Chloro-1,2-bis(4-methylphenyl)ethanone (CAS: 71193-32-3), it is ...

71193-32-32-Chloro-1,2-bis(4-m...
Compound Q&A

What industries use 4-Ethoxy-3-(5-methyl-4-oxo-7-propyl-1,4-dihydroimidazo[5,1-f][1,2,4]triazin-2-yl)benzenesulfonyl chloride (CAS: 224789-26-8)?

4-Ethoxy-3-(5-methyl-4-oxo-7-propyl-1,4-dihydroimidazo[5,1-f][1,2,4]triazin-2-yl...

224789-26-84-Ethoxy-3-(5-methyl...
Compound Q&A

How should Methyl 3-Oxo-4-Androsten-17-Carboxylate (CAS: 2681-55-2) be stored?

Methyl 3-Oxo-4-Androsten-17-Carboxylate (CAS: 2681-55-2) should be stored in a c...

2681-55-2Methyl 3-Oxo-4-Andro...
Compound Q&A

What are the main uses of (R)-3-Amino-4-(3-hexylphenylamino)-4-oxobutylphosphonic acid (CAS: 909725-61-7)?

(R)-3-Amino-4-(3-hexylphenylamino)-4-oxobutylphosphonic acid is primarily used i...

909725-61-7(R)-3-Amino-4-(3-hex...
Compound Q&A

What regulatory guidelines apply to 2-Methyl-2-propanyl 3-amino-3-carbamoyl-1-azetidinecarboxylate (CAS: 1254120-14-3)?

2-Methyl-2-propanyl 3-amino-3-carbamoyl-1-azetidinecarboxylate (CAS: 1254120-14-...

1254120-14-32-Methyl-2-propanyl ...
Compound Q&A

Are there alternatives to (E)-4-(tert-Butoxy)-4-oxobut-2-enoic acid (CAS: 135355-96-3) in synthesis?

There are alternative reagents that can be used in synthesis instead of (E)-4-(t...

135355-96-3(E)-4-(tert-Butoxy)-...
Compound Q&A

What are the physical and chemical properties of [2-(3-Chlorophenyl)-1,3-thiazol-4-yl]methanol (CAS: 121202-20-8)?

[2-(3-Chlorophenyl)-1,3-thiazol-4-yl]methanol (CAS: 121202-20-8) is a crystallin...

121202-20-8[2-(3-Chlorophenyl)-...
166249-17-8Methyl (2S)-[(4S)-2,...
Compound Q&A

What is the market or research trend for 1-Bromo-2-isocyanatoethane (CAS: 42865-19-0)?

The market for 1-Bromo-2-isocyanatoethane (CAS: 42865-19-0) is driven by its use...

42865-19-01-Bromo-2-isocyanato...
Compound Q&A

What are the main uses of 4-Nitro-D-phenylalanine hydrochloride (CAS: 147065-06-3)?

4-Nitro-D-phenylalanine hydrochloride (CAS: 147065-06-3) is primarily used in re...

147065-06-34-Nitro-D-phenylalan...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.