Nucleic acid sensor for M. tuberculosis detection based on surface plasmon resonance

Literature Information

Publication Date 2008-08-05
DOI 10.1039/B808225A
Impact Factor 4.616
Authors

Kavita Arora, Sunil K. Arya, Pratima R. Solanki, M. Iwamoto, Harpal Singh, B. D. Malhotra


View Original

Abstract

Cysteine modified NH2-end peptide nucleic acid (PNA) (24-mer) probe and 5′-thiol end labeled deoxyribonucleic acid (DNA) probes specific to Mycobacterium tuberculosis have been immobilized onto BK-7 gold coated glass plates for the detection of complementary, one-base mismatch, non-complementary targets and complementary target sequence in genomic DNA of Mycobacterium tuberculosis using a surface plasmon resonance (SPR) technique. The DNA/Au and PNA/Au bio-electrodes have been characterized using contact angle, atomic force microscopy (AFM), electrochemical impedance spectroscopy (EIS) and cyclic voltammetric (CV) techniques, respectively. It is revealed that there is a 252 millidegrees SPR angle change in the case of PNA immobilization and 205 millidegrees for DNA immobilization, indicating increased amount of immobilized PNA molecules. Hybridization studies reveal that there is no binding of the non-complementary target to DNA/Au and PNA/Au electrode. Compared to the DNA/Au bioelectrode, PNA/Au electrode has been found to be more efficient for detection of one-base mismatch sequence. The PNA/Au bioelectrode shows better detection limit (1.0 ng ml−1) over the DNA-Au bioelectrode (3.0 ng ml−1). The values of the association (ka) and dissociation rate constant (kd) for the complementary sequence in case of the PNA/Au bioelectrode have been estimated as 8.5 × 104 m−1 s−1 and 3.6 × 10−3 s−1, respectively.

Related Literature

Inside back cover

Cover

DOI: 10.1039/C8CP91776K

Poly(vinylidene fluoride)/poly(3-methylthiophene) core–shell nanocomposites with improved structural and electronic properties of the conducting polymer component

Nikolay A. Ogurtsov, Valery N. Bliznyuk, Andrii V. Mamykin, Oleksandr L. Kukla, Yuri P. Piryatinski, Alexander A. Pud

2018-02-05 Paper

DOI: 10.1039/C7CP07604E

An ab initio study of Cu-based delafossites as an alternative to nickel oxide in photocathodes: effects of Mg-doping and surface electronic features

Eduardo Schiavo, Vincenzo Barone, Orlando Crescenzi, Ana B. Muñoz-García, Michele Pavone

2018-04-18 Paper

DOI: 10.1039/C8CP00848E

Adsorption of alcohols and hydrocarbons on nonstoichiometric cementite{010} surfaces

David Muñoz Ramo, Stephen J. Jenkins

2018-05-03 Paper

DOI: 10.1039/C8CP01028E

Calorimetric study of water's two glass transitions in the presence of LiCl

Thomas Loerting

2018-02-07 Paper

DOI: 10.1039/C7CP08677F

Asymmetric triphenylamine–phenothiazine based small molecules with varying terminal acceptors for solution processed bulk-heterojunction organic solar cells

Srikanth Revoju, Subhayan Biswas, Bertil Eliasson, Ganesh D. Sharma

2018-02-01 Paper

DOI: 10.1039/C7CP08653A

Isomer-specific detection in the UV photodissociation of the propargyl radical by chirped-pulse mm-wave spectroscopy in a pulsed quasi-uniform flow

Bernadette M. Broderick, Nicolas Suas-David, Nureshan Dias, Arthur G. Suits

2017-11-13 Paper

DOI: 10.1039/C7CP06211G

Fermi resonance in solvated H3O+: a counter-intuitive trend confirmed via a joint experimental and theoretical investigation

Qian-Rui Huang, Tomoki Nishigori, Marusu Katada, Asuka Fujii, Jer-Lai Kuo

2018-04-30 Paper

DOI: 10.1039/C8CP02151A

You might also like

Compound Q&A

What precautions should be taken when handling 2-Chloro-1,2-bis(4-methylphenyl)ethanone (CAS: 71193-32-3)?

When handling 2-Chloro-1,2-bis(4-methylphenyl)ethanone (CAS: 71193-32-3), it is ...

71193-32-32-Chloro-1,2-bis(4-m...
Compound Q&A

What industries use 4-Ethoxy-3-(5-methyl-4-oxo-7-propyl-1,4-dihydroimidazo[5,1-f][1,2,4]triazin-2-yl)benzenesulfonyl chloride (CAS: 224789-26-8)?

4-Ethoxy-3-(5-methyl-4-oxo-7-propyl-1,4-dihydroimidazo[5,1-f][1,2,4]triazin-2-yl...

224789-26-84-Ethoxy-3-(5-methyl...
Compound Q&A

How should Methyl 3-Oxo-4-Androsten-17-Carboxylate (CAS: 2681-55-2) be stored?

Methyl 3-Oxo-4-Androsten-17-Carboxylate (CAS: 2681-55-2) should be stored in a c...

2681-55-2Methyl 3-Oxo-4-Andro...
Compound Q&A

What are the main uses of (R)-3-Amino-4-(3-hexylphenylamino)-4-oxobutylphosphonic acid (CAS: 909725-61-7)?

(R)-3-Amino-4-(3-hexylphenylamino)-4-oxobutylphosphonic acid is primarily used i...

909725-61-7(R)-3-Amino-4-(3-hex...
Compound Q&A

What regulatory guidelines apply to 2-Methyl-2-propanyl 3-amino-3-carbamoyl-1-azetidinecarboxylate (CAS: 1254120-14-3)?

2-Methyl-2-propanyl 3-amino-3-carbamoyl-1-azetidinecarboxylate (CAS: 1254120-14-...

1254120-14-32-Methyl-2-propanyl ...
Compound Q&A

Are there alternatives to (E)-4-(tert-Butoxy)-4-oxobut-2-enoic acid (CAS: 135355-96-3) in synthesis?

There are alternative reagents that can be used in synthesis instead of (E)-4-(t...

135355-96-3(E)-4-(tert-Butoxy)-...
Compound Q&A

What are the physical and chemical properties of [2-(3-Chlorophenyl)-1,3-thiazol-4-yl]methanol (CAS: 121202-20-8)?

[2-(3-Chlorophenyl)-1,3-thiazol-4-yl]methanol (CAS: 121202-20-8) is a crystallin...

121202-20-8[2-(3-Chlorophenyl)-...
166249-17-8Methyl (2S)-[(4S)-2,...
Compound Q&A

What is the market or research trend for 1-Bromo-2-isocyanatoethane (CAS: 42865-19-0)?

The market for 1-Bromo-2-isocyanatoethane (CAS: 42865-19-0) is driven by its use...

42865-19-01-Bromo-2-isocyanato...
Compound Q&A

What are the main uses of 4-Nitro-D-phenylalanine hydrochloride (CAS: 147065-06-3)?

4-Nitro-D-phenylalanine hydrochloride (CAS: 147065-06-3) is primarily used in re...

147065-06-34-Nitro-D-phenylalan...

Source Journal

Analyst

Analyst
CiteScore: 7.8
Self-citation Rate: 5.6%
Articles per Year: 653

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.