Intermolecular forces in lipid monolayers. Two-dimensional virial coefficients for pentadecanoic acid from micromanometry on spread monolayers at the air/water interface

Literature Information

Publication Date 2009-04-03
DOI 10.1039/B820460H
Impact Factor 3.676
Authors

Norman R. Pallas


View Original

Abstract

The lateral intermolecular forces between surfactant or lipid molecules in monolayers at interfaces are fundamental to understanding the phenomena of surface activity and the interactions of lipids in two-dimensional structures such as smectic phases and biomembranes. The classical approach to these forces is via the two-dimensional virial coefficients, which requires precise micromanometry on monolayer isotherms in the dilute gaseous region. Low pressure isotherms out to high surface areas in the two-dimensional gas range have been measured at 15, 25 and 30 °C for insoluble monolayers of n-pentadecanoic acid spread at the interface between water-vapour saturated air and a dilute aqueous solution of HCl. The data allow estimates of virial coefficients up to the third term. The second virial coefficients are compared with those predicted from a statistical mechanical model for monolayers of n-alkylcarboxylic acids treated as side-by-side parallel chains extended at the surface with the carboxyl head groups shielded in the water phase. The two sets coincide at ∼26 °C, but the experimental estimates show a much larger dependence on temperature than the model predicts. Chain conformation effects, head group interactions and surface field polarization are discussed as possible temperature-dependent contributions to the lateral potentials of mean force.

Related Literature

Synthesis of an oxygenated fuel additive from a waste biomass derived aldehyde using a green catalyst: an experimental and DFT study

Komal Kumar, Vikas Khatri, Firdaus Parveen, Hemant K. Kashyap, Sreedevi Upadhyayula

2020-03-23 Paper

DOI: 10.1039/D0SE00100G

A P-doped PtTe mesoporous nanotube electrocatalyst

Ziqiang Wang, Hugang Zhang, Shuli Yin, Songliang Liu, Zechuan Dai, You Xu, Xiaonian Li, Liang Wang, Hongjing Wang

2020-04-02 Paper

DOI: 10.1039/D0SE00326C

The substrate-dependent regeneration capacity of mesenchymal stem cell spheroids derived on various biomaterial surfaces

Guo-Shiang Huang, Pai-Shan Hsieh, Ching-Shiow Tseng, Shan-hui Hsu

2014-06-09 Paper

DOI: 10.1039/C4BM00053F

Contents list

Front/Back Matter

DOI: 10.1039/C3BM90035E

Correction: Highly penetrative liposome nanomedicine generated by a biomimetic strategy for enhanced cancer chemotherapy

Zonghai Sheng, Dehong Hu, Fei Yan, Guanhui Gao, Pan Wang, Xin Liu, Hairong Zheng

2021-05-13 Correction

DOI: 10.1039/D1BM90047A

Amphiphilic random copolymer vesicle induces differentiation of mouse C2C12 myoblasts

Sumit K. Dey, Krishna Dan, Mahua R. Das, Shekhar Saha, Provas Das, Suhrit Ghosh, Siddhartha S. Jana

2013-10-01 Communication

DOI: 10.1039/C3BM60180C

Surfactant decorated hydrotalcite-supported polyoxometalates for aerobic oxidation of 5-hydroxymethylfurfural and monosaccharides

Ping Cao, Ying Li, Yiming Li, Xueyan Zhang, Xiaohong Wang, Zijiang Jiang

2020-02-14 Paper

DOI: 10.1039/C9SE01296F

Fuel cell evaluation of anion exchange membranes based on poly(phenylene oxide) with different cationic group placement

Annika Carlson, Björn Eriksson, Joel S. Olsson, Göran Lindbergh, Carina Lagergren, Patric Jannasch, Rakel Wreland Lindström

2020-02-24 Paper

DOI: 10.1039/C9SE01143A

Insulator-based dielectrophoresis with β-galactosidase in nanostructured devices

Asuka Nakano, Fernanda Camacho-Alanis, Alexandra Ros

2014-11-12 Paper

DOI: 10.1039/C4AN01503G

You might also like

Compound Q&A

What industries use 4-(4-tert-Butylphenyl)-1H-pyrazol-3-amine (CAS: 1015845-73-4)?

4-(4-tert-Butylphenyl)-1H-pyrazol-3-amine finds applications in various industri...

1015845-73-44-(4-tert-Butylpheny...
Compound Q&A

What industries use H3TATAB (CAS: 63557-10-8)?

H3TATAB is used in the pharmaceutical industry for the synthesis of certain orga...

63557-10-8H3TATAB
Compound Q&A

What are the main uses of 1-Ethyl-3-fluorobenzene (CAS: 696-39-9)?

1-Ethyl-3-fluorobenzene (CAS: 696-39-9) is primarily used as a precursor in the ...

696-39-91-Ethyl-3-fluorobenz...
Compound Q&A

What are the main uses of 1-(tert-Butoxycarbonyl)-4-(4-methoxyphenyl)pyrrolidine-3-carboxylic acid (CAS: 851484-94-1)?

1-(tert-Butoxycarbonyl)-4-(4-methoxyphenyl)pyrrolidine-3-carboxylic acid is prim...

851484-94-11-(tert-Butoxycarbon...
Compound Q&A

What are the physical and chemical properties of 1-Cyclobutyl-4-piperidinone (CAS: 359880-05-0)?

1-Cyclobutyl-4-piperidinone (CAS: 359880-05-0) is a colorless or white crystalli...

359880-05-01-Cyclobutyl-4-piper...
Compound Q&A

What is Pyridine-2,6-dicarboxylic acid mono-tert-butyl ester (CAS: 575433-76-0)?

Pyridine-2,6-dicarboxylic acid mono-tert-butyl ester (CAS: 575433-76-0) is a che...

575433-76-0Pyridine-2,6-dicarbo...
Compound Q&A

What is the market or research trend for 2,3-Difluorophenylalanine (CAS: 236754-62-4)?

The market for 2,3-Difluorophenylalanine (CAS: 236754-62-4) is growing with incr...

236754-62-42,3-Difluorophenylal...
Compound Q&A

How is (2-Hydroxy-1-naphthyl)boronic acid (CAS: 898257-48-2) typically synthesized?

(2-Hydroxy-1-naphthyl)boronic acid can be synthesized through the reduction of 2...

898257-48-2(2-Hydroxy-1-naphthy...
1315351-28-0tert-Butyl (5-bromo-...
Compound Q&A

Are there alternatives to 5,7-Dihydroxy-4-oxo-2-(3,4,5-trihydroxyphenyl)-4H-chromen-3-yl beta-D-glucopyranoside (CAS: 19833-12-6) in synthesis?

While 5,7-Dihydroxy-4-oxo-2-(3,4,5-trihydroxyphenyl)-4H-chromen-3-yl beta-D-gluc...

19833-12-65,7-Dihydroxy-4-oxo-...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.