Salt-induced protein resistance of polyelectrolyte brushes studied using fluorescence correlation spectroscopy and neutron reflectometry

Literature Information

Publication Date 2004-09-16
DOI 10.1039/B410805A
Impact Factor 3.676
Authors

C. Czeslik, G. Jackler, T. Hazlett, E. Gratton, R. Steitz, A. Wittemann, M. Ballauff


View Original

Abstract

We used two-photon excitation fluorescence correlation spectroscopy (FCS) and neutron reflectometry to study in situ the effect of salt concentration on the degree of protein binding to polyelectrolyte brushes. The binding of bovine serum albumin (BSA) to poly(acrylic acid) (PAA) brushes was characterized at neutral pH values where both the protein and the brushes carry a negative charge. Spherical PAA brush particles were used in the FCS experiments, whereas a planar PAA brush served as protein substrate in the neutron reflectometry experiments. It has been found that BSA binds strongly to both the spherical and the planar PAA brushes under electrostatic repulsion at low ionic strength. The BSA volume fraction profile, as determined from the neutron reflectivities, indicates a deep penetration of the BSA molecules into the PAA brush. However, the analysis of the FCS data reveals that the protein affinity of the spherical PAA brush particles decreases drastically when increasing the concentration of sodium chloride to a few 100 mM. This observation is in line with the measured neutron reflectivities of the planar PAA brush. The reflectivity curve obtained in the absence of protein is virtually overlapping with that measured when the PAA brush is in contact with a BSA solution but containing 500 mM sodium chloride which suggests protein resistance of the planar PAA brush at this elevated salt concentration. The results of this study provide evidence for a new kind of protein-resistant interfaces. Whereas protein binding to the PAA brush is likely to be dominated by the release of counterions, this driving force vanishes as the ionic strength of the solution is raised and protein molecules are repelled from the interface by steric interactions. In a general view, the “switching” of the protein affinity of a PAA brush by varying the ionic strength of the protein solution over a relatively small range may appear to be useful for biotechnological applications.

Related Literature

Competitive binding-accelerated insulin release from a polypeptide nanogel for potential therapy of diabetes

Chunsheng Xiao, Jianxun Ding, Xiuli Zhuang, Guangqing Gai, Liyan Wang, Xuesi Chen

2015-04-08 Paper

DOI: 10.1039/C5PY00207A

Polypeptoids with tunable cloud point temperatures synthesized from N-substituted glycine N-thiocarboxyanhydrides

Xinfeng Tao, Jianwei Du, Youxiang Wang, Jun Ling

2015-03-05 Paper

DOI: 10.1039/C5PY00191A

Healable shape memory (thio)urethane thermosets

Le-Thu T. Nguyen, Thuy Thu Truong, Lam Le, Viet Quoc Nguyen, Anh Tuan Luu

2015-03-09 Paper

DOI: 10.1039/C5PY00126A

Synthesis of polyurethane containing carbon–carbon double bonds to prepare functionalizable ultrafine fibers via electrospinning

Wenwen Xue, Lisheng Zhang, Haizhen Chen, Jinggang Wang, Haining Na, Jin Zhu

2015-04-08 Paper

DOI: 10.1039/C5PY00107B

Synthesis and microstructural characterization of poly(chlorotrifluoroethylene-co-vinylidene chloride) copolymers

Gérald Lopez, Chun Gao, Linlin Li, Faith J. Wyzgoski, Alagappan Thenappan, Bruno Ameduri

2015-04-08 Paper

DOI: 10.1039/C5PY00271K

A facile strategy to fabricate glucose-responsive vesicles via a template of thermo-sensitive micelles

Hao Yang, Rujiang Ma, Jing Yue, Chang Li, Yong Liu, Yingli An, Linqi Shi

2015-04-07 Paper

DOI: 10.1039/C5PY00170F

You might also like

Compound Q&A

What is Ethyl 3-cyclohexylpropanoate (CAS: 10094-36-7)?

Ethyl 3-cyclohexylpropanoate is a clear, colorless to light yellow liquid with a...

10094-36-7Ethyl 3-cyclohexylpr...
Compound Q&A

How should waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl)nicotinic acid (CAS: 34783-31-8) be handled?

Waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl...

34783-31-82-(Hydroxymethyl)-5-...
Compound Q&A

How should waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) be handled?

Waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) sho...

858-46-82,4,6-Tris(pentafluo...
Compound Q&A

What precautions should be taken when handling Chloroac-nle-oh (CAS: 56787-36-1)?

When handling Chloroac-nle-oh (CAS: 56787-36-1), it is essential to wear appropr...

56787-36-1Chloroac-nle-oh
Compound Q&A

What industries use Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 752244-05-6)?

Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate is primarily used in the...

752244-05-6Ethyl 6-phenylimidaz...
Compound Q&A

Are there alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis?

Alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis ...

55095-15-3alpha-(2-Bromophenyl...
Compound Q&A

How should waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) be handled?

Waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) should be managed...

139585-48-12-Chloro-5-methoxypy...
Compound Q&A

What industries use 1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9)?

1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9) is used in various ...

5044-27-91-(4-Methoxyphenyl)-...
Compound Q&A

Are there alternatives to 3-Bromo-5-(N-Boc)aminomethylisoxazole (CAS: 903131-45-3) in synthesis?

There are alternative reagents and compounds that can be used in the synthesis o...

903131-45-33-Bromo-5-(N-Boc)ami...
Compound Q&A

What is Tungsten(IV) oxide (CAS: 12036-22-5)?

Tungsten(IV) oxide, also known as tungsten dioxide, is a chemical compound with ...

12036-22-5Tungsten(IV) oxide

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.