Surface photochemistry on confined systems: UV-laser-induced photodesorption of NO from Pd-nanostructures on Al2O3
Literature Information
Margarethe Kampling, Katharina Al-Shamery, Hans-Joachim Freund, Markus Wilde, Katsuyuki Fukutani, Yoshitada Murata
UV-laser induced desorption of NO from nanostructured palladium aggregates on an epitaxial alumina support has been studied by means of resonance enhanced multiphoton ionisation (REMPI) to detect desorbing molecules quantum state resolved by Fourier-transform infrared reflection absorption spectroscopy (FT-IRAS), X-ray photoemission spectroscopy (XPS) and thermal desorption spectroscopy (TPD). The size of the Pd-aggregates was systematically varied between 5 Å and 80 Å. Different morphologies were chosen depending on the growth conditions of the aggregates by Pd-atom deposition on the support. The aggregates were either amorphous (deposition at 100 K) or ordered (deposition at 300 K) with the aggregates having a cubooctahedral shape with dominating (111) terraces and a minority of (100) terraces. Adsorption is only similar to single crystal data for aggregate sizes beyond 75 Å. For smaller aggregates NO is bound on on-top sites of palladium. On small amorphous aggregates a substantial amount of NO is weakly bound, which has only been observed for stepped single Pd-crystals. Dissociation of NO occurs at elevated temperatures above 350 K. The system was excited with nanosecond laser pulses at 6.4 eV. In contrast to single crystals, desorption of intact NO molecules has been observed for small aggregates with increasing efficiencies with decreasing aggregate size for aggregate sizes of 80 Å and below. Desorption cross sections vary by at least one order of magnitude. Dominantly the weakly bound species desorbs. REMPI data do not show a strong size dependence. Different models are discussed to explain the data, including the role of local effects of the adsorption site, spill-over to the alumina support or formation of oscillations in electron densities.
Related Literature
Recent progress in non-fused ring electron acceptors for high performance organic solar cells
Huanhuan Gao, Chenyang Han, Xiangjian Wan, Yongsheng Chen
DOI: 10.1039/D2IM00037G
Structural engineering of catalysts for ammonia electrosynthesis from nitrate: recent advances and challenges
Wenxi Qiu, Yuanting Liu, Minghao Xie, Zhaoyu Jin, Panpan Li, Guihua Yu
DOI: 10.1039/D3EY00184A
Recent progress in the development of conductive hydrogels and the application in 3D printed wearable sensors
Yuxuan Lin, Ruxue Yang, Xin Wu
DOI: 10.1039/D3LP00077J
Tough tetrazine-functionalized styrene–butadiene rubber with self-adhesion through zinc–nitrogen coordination
Katsuhiko Tsunoda, Hideyuki Otsuka
DOI: 10.1039/D3LP00112A
Activating iodine redox by enabling single-atom coordination to dormant nitrogen sites to realize durable zinc–iodine batteries
Jisung Lee, Wooseok Lee, Seungho Back, Seung Yeop Yi, Seongseop Kim, Joonhee Moon, Dong-Yeun Koh, Kyeounghak Kim, Seoin Back, Jinwoo Lee
DOI: 10.1039/D3EY00228D
Cyclic ketal bridged bisepoxides: enabling the design of degradable epoxy-amine thermosets for carbon fiber composite applications
Benjamin M. Alameda, Margaret S. Kumler, J. Scott Murphy, Jeffrey S. Aguinaga, Derek L. Patton
DOI: 10.1039/D3LP00095H
Recent advances in tunable metal–support interactions for enhancing the photocatalytic nitrogen reduction reaction
Bing-Hao Wang, Guang-Hui Chen, Biao Hu, Xiong Wang, Sheng Tian, Xing-Sheng Hu, Yang Li, Chao Peng
DOI: 10.1039/D3EY00191A
Polybrominated diphenyl ethers in the grey-headed gull (Larus cirrocephalus) and African sacred ibis (Threskiornis aethiopicus)
C. Emereole, R. Jansen, O. J. Okonkwo
DOI: 10.1039/D3VA00119A
You might also like
How should waste containing (6-Bromo-2-naphthyl)oxy](dimethyl)(2-methyl-2-propanyl)silane be handled?
Waste containing (6-Bromo-2-naphthyl)oxy](dimethyl)(2-methyl-2-propanyl)silane (...
How is 7-Fluoro-4-isoquinolinecarboxylic acid (CAS: 1841081-40-0) typically synthesized?
7-Fluoro-4-isoquinolinecarboxylic acid can be synthesized via a multi-step proce...
What are the physical and chemical properties of 2,3,5,6-Tetrabromothieno[3,2-b]thiophene (CAS: 124638-53-5)?
2,3,5,6-Tetrabromothieno[3,2-b]thiophene is a crystalline compound with a high m...
Is 1-[4-(Benzylamino)-7,8-dihydro-5H-pyrano[4,3-d]pyrimidin-2-yl]-2-methyl-1H-indole-4-carboxamide (CAS: 1542705-92-9) safe?
1-[4-(Benzylamino)-7,8-dihydro-5H-pyrano[4,3-d]pyrimidin-2-yl]-2-methyl-1H-indol...
What is the market or research trend for imidazo[5,1-d]-1,2,3,5-tetrazine-8-carboxylic acid, 3,4-dihydro-3-methyl-4-oxo- (CAS: 113942-30-6)?
The market for imidazo[5,1-d]-1,2,3,5-tetrazine-8-carboxylic acid, 3,4-dihydro-3...
What is 3-(Triisopropylsilyl)propiolaldehyde (CAS: 163271-80-5)?
3-(Triisopropylsilyl)propiolaldehyde is a synthetic organic compound with the CA...
What regulatory guidelines apply to 6-Nitro-2H-1,4-benzoxazin-3(4H)-one (CAS: 81721-87-1)?
6-Nitro-2H-1,4-benzoxazin-3(4H)-one (CAS: 81721-87-1) is subject to various regu...
How should waste containing (3-Fluorophenyl)(4-{[(2-methyl-2-propanyl)oxy]carbonyl}-1-piperazinyl)acetic acid (CAS: 885272-91-3) be handled?
Waste containing (3-Fluorophenyl)(4-{[(2-methyl-2-propanyl)oxy]carbonyl}-1-piper...
What are the physical and chemical properties of N,N'-4,4'-Biphenyldiyldiisonicotinamide (CAS: 55119-40-9)?
N,N'-4,4'-Biphenyldiyldiisonicotinamide is a white crystalline solid with a mole...
What industries use 6-Bromo-8-fluoro-2-quinazolinol (CAS: 1036756-15-6)?
6-Bromo-8-fluoro-2-quinazolinol is primarily used in the pharmaceutical industry...
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.














