Development of an automated, simultaneous and continuous measurement system by using a diffusion scrubber coupled to ion chromatography for monitoring trace acidic and basic gases (HCl, HNO3, SO2 and NH3) in the atmosphere
Literature Information
An automated simultaneous measurement system for monitoring acidic and basic gases such as HCl, HNO3, SO2 and NH3 in the atmosphere was developed by using a diffusion scrubber coupled to an ion chromatograph (DS-IC system). Acidic and basic gases were effectively collected by the diffusion scrubber which consisted of a hydrophobic porous polytetrafluoroethylene (PTFE) tube disposed concentrically within a Pyrex-glass tube. De-ionized water was used as a scrubbing solution for collecting the acidic and basic gases such as HCl, HNO3, SO2 and NH3, which were dissociated to ion species (Cl–, NO3–, SO32–, SO42– and NH4+, respectively). After the collection of gases, the total anions and cations in the scrubbing solution were preconcentrated in anion and cation concentrator columns connected in series. All the analyte ions were separated and determined by ion chromatography. All operations relating to the air sampling, the preconcentration and the ion chromatographic analysis were controlled by a sequencer. Automated simultaneous continuous measurement could be performed at 60 min intervals. The collection efficiencies of the acidic and basic gases were higher than 97% at an air flow rate of 1 l min–1. The detection limits (3ς of the blank value) of HCl, HNO3, SO2 and NH3 were less than 0.01 ppbv for a 52 l of air sampling volume. The interference from co-existing NO2 for measuring HNO3 was negligible. The concentrations of SO2 measured by this automated measurement (DS-IC) system showed good agreement with those obtained with a pulse-fluorescence meter.
Related Literature
Probing the first steps of photoinduced free radical polymerization at water–oil interfaces
Denisa Darvasiová, Zuzana Barberiková, Anna Eibel, Max Schmallegger, Georg Gescheidt, Michal Zalibera, Dmytro Neshchadin
DOI: 10.1039/C7PY01414G
Synthesis and bioconjugation of first alkynylated poly(dithieno[3,2-b:2′,3′-d]pyrrole)s
Sylvia Schmid, Jasmina Gačanin, Peter Bäuerle
DOI: 10.1039/C7PY01528C
Aluminium-catalyzed terpolymerization of furfuryl glycidyl ether with epichlorohydrin and ethylene oxide: synthesis of thermoreversible polyepichlorohydrin elastomers with furan/maleimide covalent crosslinks
Ming Deng, Fang Guo, Daohong Liao, Yang Li
DOI: 10.1039/C7PY01516J
Vector correlations in the 355 nm photolysis of thermal NO2
Richard P. Baker, Matthew L. Costen, Gus Hancock, Grant A. D. Ritchie, Dean Summerfield
DOI: 10.1039/A907955F
Prediction of the carrier-mediated cation flux through polymer inclusion membranes via fundamental thermodynamic quantities: complexation study of bis(dodecyloxy)calix[4]arene-crown-6 with alkali metal cations
Dusten M. Macdonald, John D. Lamb, Bruce A. Moyer
DOI: 10.1039/A908840G
Ab initio and diffusion Monte Carlo study of uracil–water, thymine–water, cytosine–water, and cytosine–(water)2
Tanja van Mourik, David M. Benoit, Sarah L. Price, David C. Clary
DOI: 10.1039/A909183A
You might also like
How is Ethyl 4-chlorothieno[2,3-b]pyridine-5-carboxylate (CAS: 59713-58-5) typically synthesized?
Ethyl 4-chlorothieno[2,3-b]pyridine-5-carboxylate (CAS: 59713-58-5) can be synth...
What regulatory guidelines apply to 5-Methyl-1H-indole-3-carbaldehyde (CAS: 52562-50-2)?
5-Methyl-1H-indole-3-carbaldehyde (CAS: 52562-50-2) is subject to various regula...
What are the physical and chemical properties of (1,3-Dimethyl-2,4-dioxo-1,2,3,4-tetrahydro-5-pyrimidinyl)boronic acid (CAS: 223418-73-3)?
(1,3-Dimethyl-2,4-dioxo-1,2,3,4-tetrahydro-5-pyrimidinyl)boronic acid is a white...
How should waste containing Sulfocostunolide A (CAS: 1016983-51-9) be handled?
Waste containing Sulfocostunolide A (CAS: 1016983-51-9) should be handled with c...
What precautions should be taken when handling Murraxocin (CAS: 88478-44-8)?
When handling Murraxocin (CAS: 88478-44-8), ensure proper personal protective eq...
What are the physical and chemical properties of Formvar (CAS: 63148-64-1)?
Formvar (CAS: 63148-64-1) is an alkyd resin characterized by a high molecular we...
Is (S)-4-benzyl-2-((benzyloxy)methyl)morpholine (CAS: 205242-66-6) safe?
(S)-4-benzyl-2-((benzyloxy)methyl)morpholine is generally safe when handled with...
What industries use Methyl 1-(5-bromo-2-pyrimidinyl)cyclopropanecarboxylate (CAS: 1447607-69-3)?
Methyl 1-(5-bromo-2-pyrimidinyl)cyclopropanecarboxylate (CAS: 1447607-69-3) is p...
Is 2-Methyl-1-phenyl-1-propanamine hydrochloride (CAS: 24290-47-9) safe?
2-Methyl-1-phenyl-1-propanamine hydrochloride (CAS: 24290-47-9) is generally con...
How is 3-(4-Bromophenyl)-2-methylpropanoic acid (CAS: 66735-01-1) typically synthesized?
3-(4-Bromophenyl)-2-methylpropanoic acid is synthesized through a multi-step pro...
Source Journal
Analyst

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.













![Sodium 6-amino-3-[(E)-{4-[(E)-(4-aminophenyl)diazenyl]-2-methoxy-5-methylphenyl}diazenyl]-4-hydroxy-2-naphthalenesulfonate structure Sodium 6-amino-3-[(E)-{4-[(E)-(4-aminophenyl)diazenyl]-2-methoxy-5-methylphenyl}diazenyl]-4-hydroxy-2-naphthalenesulfonate structure](https://static.chemtradehub.com/structs/294/2945-96-2-092f.webp)
![2-(Methylsulfonyl)-2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazole structure 2-(Methylsulfonyl)-2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazole structure](https://static.chemtradehub.com/structs/122/1226781-80-1-09d5.webp)