Van der Waals-like global phase diagrams
Literature Information
Since the first global phase diagram (1970) based upon the van der Waals equation of state for binary mixtures, there have been many newer ones, most recently that obtained by Yelash and Kraska (Ber. Bunsen-Ges. Phys. Chem., 1998, 102 213) by combining the Carnahan and Starling hard-sphere equation of state (J. Chem. Phys., 1969, 51, 635) with the original van der Waals attraction. Of the various such equations the results for the original van der Waals equation seem to be the least satisfactory in comparison with the experimental one-component fluid, and probably also for binary mixtures. However the Carnahan and Starling equation diverges only at a density much higher than close-packed. Sanchez (J. Chem. Phys., 1994, 101, 7003) has developed a new 4,3 Padeā² approximant that fits the virial coefficients of the hard sphere fluid and which diverges almost exactly at the close-packed density. If this expression is used in a van der Waals-like equation of state, it produces the same kind of closed-loop diagrams that Yelash and Kraska found, although over a substantially smaller area of the global phase diagram. Extensions of global phase diagrams to mixtures of molecules of different size (even to polymer systems) seem promising. In particular a simple equation of state with the Flory mixing equation and the Prigogine entropy parameter (TheMolecularTheoryofSolutions, North Holland, Amsterdam, 1957, ch. XVI) has led to a satisfactory account of tricritical points in hydrocarbon systems and should be investigated further.
Recommended Journals

Journal of Chemical Sciences

Polycyclic Aromatic Compounds

NDT & E International

Bioorganic & Medicinal Chemistry Letters

Bioorganic & Medicinal Chemistry

Journal of the Indian Institute of Science

Heteroatom Chemistry

Critical Reviews in Solid State and Materials Sciences

Chinese Journal of Chemistry

Biocatalysis and Biotransformation
Related Literature
Structural, optical and phonon properties of formate-based MOF phosphors with ethylammonium cations
M. Ptak, K. Pasińska, P. Głuchowski, A. Łukowiak, A. Ciupa
DOI: 10.1039/C7CP04005A
Polarization transfer efficiency in PHIP experiments
M. Emondts, J. F. P. Colell, B. Blümich
DOI: 10.1039/C7CP04296E
Defluorination and covalent grafting of fluorinated graphene with TEMPO in a radical mechanism
Wenchuan Lai, Dazhou Xu, Xu Wang, Zaoming Wang, Yang Liu, Xiaojiao Zhang, Yulong Li, Xiangyang Liu
DOI: 10.1039/C7CP04439A
Redox cycling of iron by carbon dot enhanced chemiluminescence: mechanism of electron–hole induction in carbon dot
Syed Niaz Ali Shah, Ling Lin, Yongzan Zheng, Dingkun Zhang, Jin-Ming Lin
DOI: 10.1039/C7CP03724D
Can an ammonium-based room temperature ionic liquid counteract the urea-induced denaturation of a small peptide?
Soumadwip Ghosh, Souvik Dey, Mahendra Patel, Rajarshi Chakrabarti
DOI: 10.1039/C6CP08842B
The reversal of the spontaneous exchange bias effect and zero-field-cooling magnetization in La1.5Sr0.5Co1−xFexMnO6: the effect of Fe doping
H. G. Zhang, L. Xie, X. C. Liu, M. X. Xiong, L. L. Cao, Y. T. Li
DOI: 10.1039/C7CP04773H
Elucidating the impact of A-site cation change on photocatalytic H2 and O2 evolution activities of perovskite-type LnTaON2 (Ln = La and Pr)
Maged F. Bekheet, Judy N. Hart, Junie Jhon M. Vequizo, Akira Yamakata, Kunio Yubuta, Aleksander Gurlo, Masashi Hasegawa, Kazunari Domen
DOI: 10.1039/C7CP03714G
Limestone calcination under calcium-looping conditions for CO2 capture and thermochemical energy storage in the presence of H2O: an in situ XRD analysis
Jose Manuel Valverde, Santiago Medina
DOI: 10.1039/C7CP00260B
Self-thermophoretic motion of controlled assembled micro-/nanomotors
Xiankun Lin, Tieyan Si, Zhiguang Wu, Qiang He
DOI: 10.1039/C7CP02561K
The influence of a thermoresponsive polymer on the microdynamic phase transition mechanisms of distinctly structured thermoresponsive ionic liquids
Lan Ma, Ge Wang
DOI: 10.1039/C7CP03602G
You might also like
What are the main uses of 4-Nitrophenyl phosphate disodium salt hexahydrate (CAS: 333338-18-4)?
4-Nitrophenyl phosphate disodium salt hexahydrate is primarily used as a substra...
What are the main uses of 2-(Trifluoromethyl)-1,3-oxazole-4-carboxylic Acid (CAS: 1060816-01-4)?
2-(Trifluoromethyl)-1,3-oxazole-4-carboxylic Acid (CAS: 1060816-01-4) is widely ...
How should 2-Fluoro-4-biphenylcarboxylic acid (CAS: 137045-30-8) be stored?
2-Fluoro-4-biphenylcarboxylic acid should be stored in a cool, dry place at room...
What industries use Prednisolone-21-Carboxylic Acid (CAS: 61549-70-0)?
Prednisolone-21-Carboxylic Acid is primarily used in the pharmaceutical industry...
How should 4-(Hydrazinomethyl)-1,2,3-benzenetriol (CAS: 3614-72-0) be stored?
4-(Hydrazinomethyl)-1,2,3-benzenetriol (CAS: 3614-72-0) should be stored in a co...
What industries use 4-Amino-1-methyl-1H-pyrazole-5-carboxylic acid hydrochloride (CAS: 92534-70-8)?
4-Amino-1-methyl-1H-pyrazole-5-carboxylic acid hydrochloride (CAS: 92534-70-8) i...
What regulatory guidelines apply to dehydropachymic acid (CAS: 77012-31-8)?
Dehydropachymic acid (CAS: 77012-31-8) is regulated by various agencies. It fall...
What is the market or research trend for 6-[(2,2-Dimethylpropanoyl)amino]nicotinic acid (CAS: 898561-66-5)?
The market and research trends for 6-[(2,2-Dimethylpropanoyl)amino]nicotinic aci...
How should 1,10-Phenanthroline-2,9-dicarbaldehyde (CAS: 57709-62-3) be stored?
1,10-Phenanthroline-2,9-dicarbaldehyde should be stored in a cool, dry place awa...
How is 5-Carbamoyl-11-oxo-10,11-dihydro-5H-dibenzo[b,f]azepin-10-yl acetate (CAS: 113952-21-9) typically synthesized?
5-Carbamoyl-11-oxo-10,11-dihydro-5H-dibenzo[b,f]azepin-10-yl acetate can be synt...
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.
![5-Bromo-1H-pyrrolo[2,3-b]pyridine structure 5-Bromo-1H-pyrrolo[2,3-b]pyridine structure](https://static.chemtradehub.com/structs/183/183208-35-7-2d72.webp)



