A novel MWCNT-encapsulated (2-aminoethyl)piperazine-decorated zinc(ii) phthalocyanine composite: development of an electrochemical sensor for detecting the antipsychotic drug promazine in environmental samples

Literature Information

Publication Date 2023-10-17
DOI 10.1039/D3TB01859H
Impact Factor 6.331
Authors

Mounesh, K. V. Yatish, Anup Pandith, Gaber E. Eldesoky, Bhari Mallanna Nagaraja


View Original

Abstract

A nanocomposite of (2-aminoethyl)piperazine ligand substituted with zinc(II) tetra carboxylic acid phthalocyanine (ZnTEPZCAPC) and MWCNTs was constructed and employed to develop an electrochemical sensor with outstanding sensitivity and a low detection limit. The macrocyclic complex ZnTEPZCAPC was first synthesized and then employed for the electrochemical determination of the antipsychotic drug promazine (PMZ). The as-prepared ZnTEPZCAPC and MWCNT nanocomposite was characterized using different techniques, such as Fourier-transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), UV-visible spectroscopy (UV-Vis), field emission scanning electron microscopy (FE-SEM), and thermogravimetric analysis (TGA). Further, the prepared ZnTEPZCAPC@MWCNT nanocomposites were modified on a glassy carbon electrode (GCE) surface, and the electrochemical activity was investigated using cyclic voltammetry (CV), differential pulse voltammetry (DPV), and chronoamperometry (CA) tests in pH 7.0 phosphate buffer solution (PBS) in the potential window of 0.0–1 V. The ZnTEPZCAPC@MWCNTs displayed a superior electrochemical performance because of their high electrochemical active surface area (0.453 cm2), good conductivity, and a synergetic effect. The developed electrochemical sensor exhibited a broad linear range of 0.05–635 μM and the lowest detection limit of 0.0125 nM, as well as excellent sensitivity, repeatability, and reproducibility. Finally, the fabricated sensor was successively used for the real-time detection of PMZ in environmental and biological samples and displayed feasible recoveries.

Related Literature

Biosensor surface functionalization by a simple photochemical immobilization of antibodies: experimental characterization by mass spectrometry and surface enhanced Raman spectroscopy

Bartolomeo Della Ventura, Martina Banchelli, Riccardo Funari, Anna Illiano, Marella De Angelis, Paola Taroni, Angela Amoresano, Paolo Matteini, Raffaele Velotta

2019-10-10 Paper

DOI: 10.1039/C9AN00443B

Enzyme-linked immunosorbent assay utilizing thin-layered microfluidics

Tatsuro Nakao, Yutaka Kazoe, Emi Mori, Hisashi Shimizu

2019-09-18 Paper

DOI: 10.1039/C9AN01491H

A fluorescent turn-on probe for visualizing lysosomes in hypoxic tumor cells

Yingchao Liu, Feiyi Wang, Qiang Fei, Ben Shi, Jiancai An, Chunchang Zhao, Chen-Ho Tung

2016-04-15 Communication

DOI: 10.1039/C6AN00369A

Functionalization of metal nanoclusters for biomedical applications

Nirmal Goswami, Huang-Hao Yang, Jianping Xie

2016-04-21 Critical Review

DOI: 10.1039/C6AN00773B

Quantitative analysis of trace palladium contamination in solution using electrochemical X-ray fluorescence (EC-XRF)

Zoë J. Ayres, Mark E. Newton, Julie V. Macpherson

2016-04-20 Paper

DOI: 10.1039/C6AN00340K

Emerging paper microfluidic devices

Bingbing Gao, Xin Li, Yaqiong Yang, Jianlin Chu, Bingfang He

2019-09-18 Critical Review

DOI: 10.1039/C9AN01275C

DNA tetrahedron and star trigon nanostructures for target recycling detection of nucleic acid

Xifeng Chen, Bidou Wang, Guangxing Liu, Yuguo Tang, Peng Miao

2016-05-04 Communication

DOI: 10.1039/C6AN00762G

Solvent-independent determination of heteroatom protonation states from NMR spectra by differential deuterium isotope shifts

Sebastian Tassoti, Martin Walenta, Alexander Pöcheim, Kathrin Buchberger, Olaf Kunert, Klaus Zangger

2019-11-11 Paper

DOI: 10.1039/C9AN01364D

You might also like

Compound Q&A

What precautions should be taken when handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3)?

When handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3), it ...

79206-94-34-(2-Furylmethyl)thi...
Compound Q&A

What precautions should be taken when handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9)?

When handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9), it...

71320-77-94-Chloro-N-[2-(4-mor...
Compound Q&A

How should waste containing 2-[2-(2-Methoxyethoxy)ethoxy]ethyl 4-methylbenzenesulfonate (CAS: 62921-74-8) be handled?

Waste containing this compound (CAS: 62921-74-8) should be handled according to ...

62921-74-82-[2-(2-Methoxyethox...
Compound Q&A

How should waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate be handled?

Waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate should be collected i...

40056-18-6(S)-Methyl 2-amino-3...
166882-70-85-({4-[(2S,4R)-4-Hyd...
Compound Q&A

Are there alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid (CAS: 7312-27-8) in synthesis?

There are several alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid in syn...

7312-27-8(2E)-3-(3,4-Dichloro...
Compound Q&A

How should Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84-9) be stored?

Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84...

925437-84-9Ethyl 6-(2-nitrophen...
Compound Q&A

How should waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) be handled?

Waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) should be coll...

18453-07-12-(1,3-Thiazol-2-yl)...
Compound Q&A

How is Methyl 5-iodo-2-methylbenzoate (CAS: 103440-54-6) typically synthesized?

Methyl 5-iodo-2-methylbenzoate can be synthesized through the iodination of meth...

103440-54-6Methyl 5-iodo-2-meth...
Compound Q&A

How is 5-Chloro[1,2,4]triazolo[1,5-a]pyridine (CAS: 1427399-34-5) typically synthesized?

5-Chloro[1,2,4]triazolo[1,5-a]pyridine is commonly synthesized via the condensat...

1427399-34-55-Chloro[1,2,4]triaz...

Source Journal

Journal of Materials Chemistry B

Journal of Materials Chemistry B
CiteScore: 12
Self-citation Rate: 4.9%
Articles per Year: 831

Journal of Materials Chemistry A, B & C cover high quality studies across all fields of materials chemistry. The journals focus on those theoretical or experimental studies that report new understanding, applications, properties and synthesis of materials. The journals have a strong history of publishing quality reports of interest to interdisciplinary communities and providing an efficient and rigorous service through peer review and publication. The journals are led by an international team of Editors-in-Chief and Associate Editors who are all active researchers in their fields. Journal of Materials Chemistry A, B & C are separated by the intended application of the material studied. Broadly, applications in energy and sustainability are of interest to Journal of Materials Chemistry A, applications in biology and medicine are of interest to Journal of Materials Chemistry B, and applications in optical, magnetic and electronic devices are of interest to Journal of Materials Chemistry C. More than one Journal of Materials Chemistry journal may be suitable for certain fields and researchers are encouraged to submit their paper to the journal that they feel best fits for their particular article. Example topic areas within the scope of Journal of Materials Chemistry B are listed below. This list is neither exhaustive nor exclusive. Antifouling coatings Biocompatible materials Bioelectronics Bioimaging Biomimetics Biomineralisation Bionics Biosensors Diagnostics Drug delivery Gene delivery Immunobiology Nanomedicine Regenerative medicine & Tissue engineering Scaffolds Soft robotics Stem cells Therapeutic devices image block All articles published in Journal of Materials Chemistry B from 2019 onwards will be indexed in MEDLINE®. Articles that primarily focus on providing insight into the underlying science and performance of biomaterials within a biological environment are more suited to our companion journal, Biomaterials Science.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.