Porous Ga0.25Li6.25La3Zr2O12 frameworks by gelcasting–reaction sintering for high-performance hybrid quasi-solid lithium metal batteries

Literature Information

Publication Date 2023-09-29
DOI 10.1039/D3TA04638A
Impact Factor 12.732
Authors

Ying Zhou, Ying Tian, Wen Wang, Yu Zhou


View Original

Abstract

The poor interface between Li/LLZO leads to the easy penetration of lithium metal into the garnet-type electrolyte, which limits its application. A hybrid quasi-solid electrolyte (HQSE) composed of porous LLZO and liquid electrolyte (LE) can effectively solve the interface problem. In practice, the implementation of HQSE-based batteries typically necessitates the use of porous LLZO scaffolds that possess sufficient mechanical strength. Herein, a novel method was developed to prepare porous LLZO scaffolds by combining gel casting and in situ reaction sintering. The enhanced mass transfer effect of the Li2O liquid phase on the surface of LLZO particles in the early stages, as well as the LiGaO2 liquid phase at the grain boundaries in the later stages, would result in the rapid densification of porous LLZO. By controlling the sintering temperature, the degree of densification can be controlled, thereby achieving a balance between porosity and mechanical strength in the porous LLZO scaffolds. When the solid phase content is 27.5 vol%, the porous LLZO scaffold obtained by heating at 1050 °C for 2 h exhibits a porosity of 32.7% and a flexural strength of up to 46.5 MP. In addition, the HQSE exhibits a high room-temperature ionic conductivity of up to 2.06 × 10−3 S cm−1. The symmetric cells delivered high cycling stability of over 800 h for lithium plating and stripping at a current density of 0.5 mA cm−2 with a small polarization voltage of about 0.05 V. This method offers a new route toward constructing a range of 3D scaffolds with SSEs for quasi-solid-state battery applications.

Related Literature

Supraparticle physical chemistry

2010-09-17 Editorial

DOI: 10.1039/C0CP90091E

Mesoscopic non-equilibrium thermodynamics of non-isothermal reaction-diffusion

I. Pagonabarraga, J. M. Ortiz de Zárate, J. V. Sengers

2010-08-27 Paper

DOI: 10.1039/C0CP00289E

Understanding the concept of randomness in inelastic electron tunneling excitations

Jinlong Yang, Jianguo Hou

2010-08-16 Perspective

DOI: 10.1039/B926310A

Optical imaging of excited-state tautomerization in single molecules

Anna M. Chizhik, Regina Jäger, Alexey I. Chizhik, Sebastian Bär, Hans-Georg Mack, Marcus Sackrow, Catrinel Stanciu, Alexey Lyubimtsev, Michael Hanack, Alfred J. Meixner

2011-01-14 Perspective

DOI: 10.1039/C0CP02228D

Fluorescence spectra of organic dyes in solution: a time dependent multilevel approach

Susanna Monti, Alfonso Pedone, Giacomo Prampolini

2010-12-02 Paper

DOI: 10.1039/C0CP01320J

Dynamics study of the atmospheric reaction involving vibrationally excited O3 with OH

Pingya Luo, Rong Zeng, Pedro J. S. B. Caridade, António J. C. Varandas

2010-08-02 Paper

DOI: 10.1039/B927542H

Ionization-induced π → H site switching dynamics in phenol–Ar3

Shun-ichi Ishiuchi, Mitsuhiko Miyazaki, Makoto Sakai, Masaaki Fujii, Matthias Schmies, Otto Dopfer

2010-12-07 Paper

DOI: 10.1039/C0CP01926G

Photovoltage improvements and recombination suppression by montmorillonite addition to PEO gel electrolyte for dye-sensitized solar cells

Yi Geng, Yantao Shi, Liduo Wang, Beibei Ma, Rui Gao, Yifeng Zhu, Haopeng Dong, Yong Qiu

2010-11-25 Paper

DOI: 10.1039/C0CP01866J

Enzyme activation and catalysis: characterisation of the vibrational modes of substrate and product in protochlorophyllide oxidoreductase

Olga A. Sytina, Maxime T. Alexandre, Derren J. Heyes, C. Neil Hunter, Bruno Robert, Rienk van Grondelle, Marie Louise Groot

2010-11-22 Paper

DOI: 10.1039/C0CP01686A

You might also like

Compound Q&A

What precautions should be taken when handling lithium chloride hydrate (1:1:1) (CAS: 16712-20-2)?

When handling lithium chloride hydrate (1:1:1) (CAS: 16712-20-2), it is importan...

16712-20-2Lithium chloride hyd...
Compound Q&A

Is 4-(4H-1,2,4-Triazol-4-yl)piperidine (CAS: 690261-92-8) safe?

4-(4H-1,2,4-Triazol-4-yl)piperidine is generally considered safe for use in phar...

690261-92-84-(4H-1,2,4-Triazol-...
Compound Q&A

How should waste containing 1,3-Thiazole-2-carboxamide (CAS: 16733-85-0) be handled?

Waste containing 1,3-Thiazole-2-carboxamide (CAS: 16733-85-0) should be collecte...

16733-85-01,3-Thiazole-2-carbo...
Compound Q&A

What regulatory guidelines apply to 5-(Difluoromethyl)-2-fluorobenzonitrile (CAS: 934175-58-3)?

5-(Difluoromethyl)-2-fluorobenzonitrile (CAS: 934175-58-3) is subject to regulat...

934175-58-35-(Difluoromethyl)-2...
Compound Q&A

How is Methyl 3-acetamido-2-thiophenecarboxylate (CAS: 22288-79-5) typically synthesized?

Methyl 3-acetamido-2-thiophenecarboxylate can be synthesized by the reaction of ...

22288-79-5Methyl 3-acetamido-2...
Compound Q&A

What is 4-Isoquinolinecarbonitrile (CAS: 34846-65-6)?

4-Isoquinolinecarbonitrile is a chemical compound with the CAS number 34846-65-6...

34846-65-64-Isoquinolinecarbon...
Compound Q&A

How should Methyl 1H-1,2,3-triazole-4-carboxylate (CAS: 877309-59-6) be stored?

Store Methyl 1H-1,2,3-triazole-4-carboxylate (CAS: 877309-59-6) in a cool, dry p...

877309-59-6Methyl 1H-1,2,3-tria...
Compound Q&A

What regulatory guidelines apply to 6-Bromo[1,3]thiazolo[5,4-b]pyridin-2-amine (CAS: 1160791-13-8)?

6-Bromo[1,3]thiazolo[5,4-b]pyridin-2-amine (CAS: 1160791-13-8) is subject to the...

1160791-13-86-Bromo[1,3]thiazolo...
Compound Q&A

Is (2S,3S)-2-Ammonio-3-(3,4-dihydroxyphenyl)-3-hydroxypropanoate (CAS: 23651-95-8) safe?

(2S,3S)-2-Ammonio-3-(3,4-dihydroxyphenyl)-3-hydroxypropanoate (CAS: 23651-95-8) ...

23651-95-8(2S,3S)-2-Ammonio-3-...
Compound Q&A

What are the physical and chemical properties of 7-bromo-3-methyl-3,4-dihydroquinazolin-4-one (CAS: 1293987-84-4)?

7-Bromo-3-methyl-3,4-dihydroquinazolin-4-one is a solid with a crystalline form....

1293987-84-47-bromo-3-methyl-3,4...

Source Journal

Journal of Materials Chemistry A

Journal of Materials Chemistry A
CiteScore: 19.5
Self-citation Rate: 4.7%
Articles per Year: 2211

Journal of Materials Chemistry A, B & C cover high quality studies across all fields of materials chemistry. The journals focus on those theoretical or experimental studies that report new understanding, applications, properties and synthesis of materials. The journals have a strong history of publishing quality reports of interest to interdisciplinary communities and providing an efficient and rigorous service through peer review and publication. The journals are led by an international team of Editors-in-Chief and Associate Editors who are all active researchers in their fields. Journal of Materials Chemistry A, B & C are separated by the intended application of the material studied. Broadly, applications in energy and sustainability are of interest to Journal of Materials Chemistry A, applications in biology and medicine are of interest to Journal of Materials Chemistry B, and applications in optical, magnetic and electronic devices are of interest to Journal of Materials Chemistry C. More than one Journal of Materials Chemistry journal may be suitable for certain fields and researchers are encouraged to submit their paper to the journal that they feel best fits for their particular article. Example topic areas within the scope of Journal of Materials Chemistry A are listed below. This list is neither exhaustive nor exclusive. Artificial photosynthesis Batteries Carbon dioxide conversion Catalysis Fuel cells Gas capture/separation/storage Green/sustainable materials Hydrogen generation Hydrogen storage Photocatalysis Photovoltaics Self-cleaning materials Self-healing materials Sensors Supercapacitors Thermoelectrics Water splitting Water treatment

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.