Thermodynamics of mixing methanol with supercritical CO2 as seen from computer simulations and thermodynamic integration
Literature Information
Réka A. Horváth, George Horvai, Abdenacer Idrissi, Pál Jedlovszky
The changes in extensive thermodynamic quantities, such as volume, energy, Helmholtz free energy and entropy, occurring upon mixing liquid methanol with supercritical CO2, are calculated using Monte Carlo simulations and thermodynamic integration for all eight combinations of four methanol and two CO2 potential models in the entire composition range at 313 K. The obtained results are also compared with experimental data whenever possible. The transition of the system from liquid to a supercritical state is found to occur at this temperature around a CO2 mole fraction value of 0.95 with all model combinations considered. This liquid to supercritical transition is always accompanied by positive Helmholtz free energy of mixing values and, consequently, by the non-miscibility of the two components. Furthermore, both this non-miscibility around the liquid to supercritical transition and also the miscibility of the two components below this transition, in the liquid regime, are found to be primarily of the energetic rather than entropic origin; the entropy of mixing turns out to be very close to zero, and around the liquid to supercritical transition even its qualitative behaviour is strongly model dependent. Finally, it is found that the methanol expansion coefficient is not sensitive to the details of the potential models, and it is always in excellent agreement with the experimental data. On the other hand, both the volume and the energy of mixing depend strongly on the molar volume of neat CO2 in the model being used, and in this respect the TraPPE model of CO2 [J. J. Potoff and J. I. Siepmann, AIChE J., 2001, 47, 1676] performs considerably better than that of Zhang and Duan [Z. Zhang and Z. Duan, J. Chem. Phys., 2005, 122, 214507].
Recommended Journals
Related Literature
Selective monitoring of parts per million levels of CO by covalently immobilized metal complexes on glass
Tarkeshwar Gupta, Marc Altman, Sandra Lo Schiavo, Placido G. Mineo, Ignazio L. Fragalà, Guennadi Evmenenko, Pulak Dutta, Milko E. van der Boom
DOI: 10.1039/B802670J
Selective detection of cesium by a water-soluble fluorescent molecular sensor based on a calix[4]arene-bis(crown-6-ether)
Vincent Souchon, Isabelle Leray, Bernard Valeur
DOI: 10.1039/B609466J
TTF-based bent-core liquid crystals
Inmaculada C. Pintre, José Luís Serrano, M. Blanca Ros, Josu Ortega, Ibón Alonso, Josu Martínez-Perdiguero, César L. Folcia, Jesús Etxebarria, Faustyna Goc, David B. Amabilino, Josep Puigmartí-Luis, Elba Gomar-Nadal
DOI: 10.1039/B801196F
Gas-phase regiocontrolled generation of charged amino acid and peptide radicals
Sheena Wee, Adam Wright
DOI: 10.1039/B608724H
Rh(ii)-catalyzed skeletal reorganization of enynes involving selective cleavage of C–C triple bonds
Kazusa Ota, Naoto Chatani
DOI: 10.1039/B805100C
Peptide/protein–polymer conjugates: synthetic strategies and design concepts
Marc A. Gauthier, Harm-Anton Klok
DOI: 10.1039/B719689J
Rational design of amphiphilic polymers to make carbon nanotubes water-dispersible, anti-biofouling, and functionalizable
Sangjin Park, Hae-Sik Yang, Dongkyu Kim, Kyungmin Jo, Sangyong Jon
DOI: 10.1039/B802057D
Electrochemical parameters and techniques in drug development, with an emphasis on quinones and related compounds
Elizabeth Anne Hillard, Fabiane Caxico de Abreu, Danielle Cristhina Melo Ferreira, Gérard Jaouen, Marília Oliveira Fonseca Goulart, Christian Amatore
DOI: 10.1039/B718116G
An efficient and reusable carbon-supported platinum catalyst for aerobic oxidation of alcohols in water
Yun Hau Ng, Shigeru Ikeda, Takashi Harada, Yoshihiro Morita, Michio Matsumura
DOI: 10.1039/B803912G
You might also like
What are the main uses of 4-Nitrophenyl phosphate disodium salt hexahydrate (CAS: 333338-18-4)?
4-Nitrophenyl phosphate disodium salt hexahydrate is primarily used as a substra...
What are the main uses of 2-(Trifluoromethyl)-1,3-oxazole-4-carboxylic Acid (CAS: 1060816-01-4)?
2-(Trifluoromethyl)-1,3-oxazole-4-carboxylic Acid (CAS: 1060816-01-4) is widely ...
How should 2-Fluoro-4-biphenylcarboxylic acid (CAS: 137045-30-8) be stored?
2-Fluoro-4-biphenylcarboxylic acid should be stored in a cool, dry place at room...
What industries use Prednisolone-21-Carboxylic Acid (CAS: 61549-70-0)?
Prednisolone-21-Carboxylic Acid is primarily used in the pharmaceutical industry...
How should 4-(Hydrazinomethyl)-1,2,3-benzenetriol (CAS: 3614-72-0) be stored?
4-(Hydrazinomethyl)-1,2,3-benzenetriol (CAS: 3614-72-0) should be stored in a co...
What industries use 4-Amino-1-methyl-1H-pyrazole-5-carboxylic acid hydrochloride (CAS: 92534-70-8)?
4-Amino-1-methyl-1H-pyrazole-5-carboxylic acid hydrochloride (CAS: 92534-70-8) i...
What regulatory guidelines apply to dehydropachymic acid (CAS: 77012-31-8)?
Dehydropachymic acid (CAS: 77012-31-8) is regulated by various agencies. It fall...
What is the market or research trend for 6-[(2,2-Dimethylpropanoyl)amino]nicotinic acid (CAS: 898561-66-5)?
The market and research trends for 6-[(2,2-Dimethylpropanoyl)amino]nicotinic aci...
How should 1,10-Phenanthroline-2,9-dicarbaldehyde (CAS: 57709-62-3) be stored?
1,10-Phenanthroline-2,9-dicarbaldehyde should be stored in a cool, dry place awa...
How is 5-Carbamoyl-11-oxo-10,11-dihydro-5H-dibenzo[b,f]azepin-10-yl acetate (CAS: 113952-21-9) typically synthesized?
5-Carbamoyl-11-oxo-10,11-dihydro-5H-dibenzo[b,f]azepin-10-yl acetate can be synt...
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.












![1-[(4-Methylphenyl)sulfonyl]-3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-1H-pyrrolo[2,3-b]pyridine-5-carbonitrile structure 1-[(4-Methylphenyl)sulfonyl]-3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-1H-pyrrolo[2,3-b]pyridine-5-carbonitrile structure](https://static.chemtradehub.com/structs/143/1434747-57-5-fc0d.webp)

