Photoreductive dissolution of cerium oxide nanoparticles and their size-dependent absorption properties

Literature Information

Publication Date 2020-02-17
DOI 10.1039/C9CP06579B
Impact Factor 3.676
Authors

Natasha W. Pettinger, Jennifer M. Empey, Sascha Fröbel, Bern Kohler


View Original

Abstract

Cerium oxide has attracted attention recently for its photocatalytic properties, but there are gaps in understanding its performance, especially at low and high pH. UV irradiation of ceria nanoparticles causes electrons from photogenerated electron–hole pairs to localize as small polarons, yielding Ce3+ ions. In pH 10 solution, ceria nanoparticles capped with polyacrylic acid ligands can accumulate large numbers of Ce3+ defects as revealed by strong bleaching of the absorption onset. In contrast, we show that UV irradiation of several-nanometer diameter ceria nanoparticles in acidic (pH < 3) aqueous solution releases Ce3+ ions into solution with a quantum yield that approaches 70% and that varies with excitation wavelength, particle size, and the presence of a hole scavenger (glycerol) on the nanoparticle surface. The instability of Ce3+ at the nanoparticle surface and the ability of electron small polarons to migrate to the surface by hopping strongly suggest that nanoceria is fully oxidized and essentially free of Ce3+ centers at pH < 3. Efficient photoreduction and the excellent stability of unirradiated nanoparticles make it easy to shrink the nanoparticles using only light, while maintaining them in a fully oxidized state. This enables study of the size-dependent absorption properties of ceria nanoparticles that are free of Ce3+ defects. No evidence of quantum confinement is observed, consistent with highly localized excited states. The observed quantum yields of photoreduction are higher than reported for other metal oxides, revealing that a significant fraction of electron–hole pairs are available for driving surface redox reactions, even in fully oxidized particles.

Related Literature

Inside front cover

2021-07-27 Cover

DOI: 10.1039/D1RE90033A

Polymer micelles decorated by gadolinium complexes as MRI blood contrast agents: design, synthesis and properties

Mathurin Grogna, Rudi Cloots, André Luxen, Christine Jérôme, Catherine Passirani, Nolwenn Lautram, Jean-F. Desreux, Christophe Detrembleur

2010-08-06 Paper

DOI: 10.1039/C0PY00117A

Sequence-controlled polymerizations: the next Holy Grail in polymer science?

Jean-François Lutz

2010-01-04 Review Article

DOI: 10.1039/B9PY00329K

Back cover

2021-03-19 Front/Back Matter

DOI: 10.1039/C005304J

Tailored monolith supports for improved ultra-low temperature water-gas shift reaction

Raquel Portela, Patrick Wolf, Jakob M. Marinkovic, Ana Serrano-Lotina, Anders Riisager, Marco Haumann

2021-08-03 Paper

DOI: 10.1039/D1RE00226K

Hydroamination of ethylene with NH3 induced by non-thermal atmospheric plasma

Julien Dieu, François Jérôme, Catherine Batiot-Dupeyrat

2021-11-02 Communication

DOI: 10.1039/D1RE00407G

You might also like

Compound Q&A

What precautions should be taken when handling lithium chloride hydrate (1:1:1) (CAS: 16712-20-2)?

When handling lithium chloride hydrate (1:1:1) (CAS: 16712-20-2), it is importan...

16712-20-2Lithium chloride hyd...
Compound Q&A

Is 4-(4H-1,2,4-Triazol-4-yl)piperidine (CAS: 690261-92-8) safe?

4-(4H-1,2,4-Triazol-4-yl)piperidine is generally considered safe for use in phar...

690261-92-84-(4H-1,2,4-Triazol-...
Compound Q&A

How should waste containing 1,3-Thiazole-2-carboxamide (CAS: 16733-85-0) be handled?

Waste containing 1,3-Thiazole-2-carboxamide (CAS: 16733-85-0) should be collecte...

16733-85-01,3-Thiazole-2-carbo...
Compound Q&A

What regulatory guidelines apply to 5-(Difluoromethyl)-2-fluorobenzonitrile (CAS: 934175-58-3)?

5-(Difluoromethyl)-2-fluorobenzonitrile (CAS: 934175-58-3) is subject to regulat...

934175-58-35-(Difluoromethyl)-2...
Compound Q&A

How is Methyl 3-acetamido-2-thiophenecarboxylate (CAS: 22288-79-5) typically synthesized?

Methyl 3-acetamido-2-thiophenecarboxylate can be synthesized by the reaction of ...

22288-79-5Methyl 3-acetamido-2...
Compound Q&A

What is 4-Isoquinolinecarbonitrile (CAS: 34846-65-6)?

4-Isoquinolinecarbonitrile is a chemical compound with the CAS number 34846-65-6...

34846-65-64-Isoquinolinecarbon...
Compound Q&A

How should Methyl 1H-1,2,3-triazole-4-carboxylate (CAS: 877309-59-6) be stored?

Store Methyl 1H-1,2,3-triazole-4-carboxylate (CAS: 877309-59-6) in a cool, dry p...

877309-59-6Methyl 1H-1,2,3-tria...
Compound Q&A

What regulatory guidelines apply to 6-Bromo[1,3]thiazolo[5,4-b]pyridin-2-amine (CAS: 1160791-13-8)?

6-Bromo[1,3]thiazolo[5,4-b]pyridin-2-amine (CAS: 1160791-13-8) is subject to the...

1160791-13-86-Bromo[1,3]thiazolo...
Compound Q&A

Is (2S,3S)-2-Ammonio-3-(3,4-dihydroxyphenyl)-3-hydroxypropanoate (CAS: 23651-95-8) safe?

(2S,3S)-2-Ammonio-3-(3,4-dihydroxyphenyl)-3-hydroxypropanoate (CAS: 23651-95-8) ...

23651-95-8(2S,3S)-2-Ammonio-3-...
Compound Q&A

What are the physical and chemical properties of 7-bromo-3-methyl-3,4-dihydroquinazolin-4-one (CAS: 1293987-84-4)?

7-Bromo-3-methyl-3,4-dihydroquinazolin-4-one is a solid with a crystalline form....

1293987-84-47-bromo-3-methyl-3,4...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.