Phonon and magnetoelastic coupling in Al0.5Ga0.5FeO3: Raman, magnetization and neutron diffraction studies
Literature Information
K. K. Mishra, R. Shukla, P. S. R. Krishna, P. D. Babu, S. N. Achary, R. S. Katiyar
The intriguing coupling phenomena among spin, phonon, and charge degrees of freedom in materials having magnetic, ferroelectric and/or ferroelastic order have been of research interest for the fundamental understanding and technological relevance. We report a detailed study on structure and phonons of Al0.5Ga0.5FeO3 (ALGF), a lead-free magnetoelectric material, carried out using variable temperature dependent powder neutron diffraction and Raman spectroscopy. Neutron diffraction studies suggest that Al3+ ions are distributed in one tetrahedrally (BO4) and three octahedrally (BO6) coordinated sites of the orthorhombic (Pc21n) structure and there is no structural transition in the temperature range of 7–800 K. Temperature dependent field-cooled and zero-field-cooled magnetization studies indicate ferrimagnetic ordering below 225 K (TN), and that is reflected in the low temperature powder neutron diffraction data. An antiferromagnetic type arrangement of Fe3+ ions with net magnetic moment of 0.13 μB/Fe3+ was observed from powder neutron diffraction analysis and it corroborates the findings from magnetization studies. At the magnetic transition temperature, no drastic change in lattice strain was observed, while significant changes in phonons were observed in the Raman spectra. The deviation of several mode frequencies from the standard anharmonicity model in the ferrimagnetic phase (below 240 K) is attributed to coupling effect between spin and phonon. Spin–phonon coupling effect is discernable from Raman bands located at 270, 425, 582, 695, 738, and 841 cm−1. Their coupling strengths (λ) have been estimated using our phonon spectra and magnetization results. BOn (n = 4, 6) libration (restricted rotation) mode at 270 cm−1 has the largest coupling constant (λ ∼ 2.3), while the stretching vibrations located at 695 and 738 cm−1 have the lowest coupling constant (λ ∼ 0.5). In addition to the libration mode, several internal stretching and bending modes of polyhedral units are strongly affected by spin ordering.
Related Literature
Sequential removal and recovery of cadmium ions (Cd2+) using photocatalysis and reduction crystallization from the aqueous phase
Vivek Kumar, Ravinder Kumar Wanchoo, Amrit Pal Toor
DOI: 10.1039/D1RE00149C
Tuning acid–base cooperativity to create bifunctional fiber catalysts for one-pot tandem reactions in water
Lijuan Jiang, Benyu Sun, Shuangshuang Liu, Mengmeng Du, Qianqian Hu, Honghui Gong, Baozhong Liu
DOI: 10.1039/D1RE00352F
Towards 4th industrial revolution efficient and sustainable continuous flow manufacturing of active pharmaceutical ingredients
Cloudius R. Sagandira, Sinazo Nqeketo, Kanyisile Mhlana, Thembela Sonti, Sibongiseni Gaqa, Paul Watts
DOI: 10.1039/D1RE00483B
Microplasma synthesized gold nanoparticles for surface enhanced Raman spectroscopic detection of methylene blue
Xuanhe Li, Wei-Hung Chiang, Kuan Chang, Hujun Xu
DOI: 10.1039/D1RE00446H
Characterization of single-phase flow hydrodynamics in a Berty reactor using computational fluid dynamics (CFD)
Khunnawat Ountaksinkul, Sirada Sripinun, Surapon Bubphacharoen, Amnart Jantharasuk, Piyasan Praserthdam
DOI: 10.1039/D1RE00390A
Renewable dimethyl carbonate for tertiary amine quaternisation: kinetic measurements and process optimisation
Roel J. T. Kleijwegt, Vera C. Henricks, Wyatt Winkenwerder, Wim Baan, John van der Schaaf
DOI: 10.1039/D1RE00191D
Steps, hops and turns: examining the effects of channel shapes on mass transfer in continuous electrochemical reactors
Hamish R. Stephen, Sarah Boyall, Christiane Schotten, Richard A. Bourne, Nikil Kapur, Charlotte E. Willans
DOI: 10.1039/D1RE00530H
Large-scale and clean preparation of low-defect few-layered graphene from commercial graphite via hydroxyl radical exfoliation in an acidic medium
Wenqiao Du, Zaiqian Yu, Xin Wang, Jingdong Wu, Long Zhang
DOI: 10.1039/D1RE00289A
You might also like
What precautions should be taken when handling lithium chloride hydrate (1:1:1) (CAS: 16712-20-2)?
When handling lithium chloride hydrate (1:1:1) (CAS: 16712-20-2), it is importan...
Is 4-(4H-1,2,4-Triazol-4-yl)piperidine (CAS: 690261-92-8) safe?
4-(4H-1,2,4-Triazol-4-yl)piperidine is generally considered safe for use in phar...
How should waste containing 1,3-Thiazole-2-carboxamide (CAS: 16733-85-0) be handled?
Waste containing 1,3-Thiazole-2-carboxamide (CAS: 16733-85-0) should be collecte...
What regulatory guidelines apply to 5-(Difluoromethyl)-2-fluorobenzonitrile (CAS: 934175-58-3)?
5-(Difluoromethyl)-2-fluorobenzonitrile (CAS: 934175-58-3) is subject to regulat...
How is Methyl 3-acetamido-2-thiophenecarboxylate (CAS: 22288-79-5) typically synthesized?
Methyl 3-acetamido-2-thiophenecarboxylate can be synthesized by the reaction of ...
What is 4-Isoquinolinecarbonitrile (CAS: 34846-65-6)?
4-Isoquinolinecarbonitrile is a chemical compound with the CAS number 34846-65-6...
How should Methyl 1H-1,2,3-triazole-4-carboxylate (CAS: 877309-59-6) be stored?
Store Methyl 1H-1,2,3-triazole-4-carboxylate (CAS: 877309-59-6) in a cool, dry p...
What regulatory guidelines apply to 6-Bromo[1,3]thiazolo[5,4-b]pyridin-2-amine (CAS: 1160791-13-8)?
6-Bromo[1,3]thiazolo[5,4-b]pyridin-2-amine (CAS: 1160791-13-8) is subject to the...
Is (2S,3S)-2-Ammonio-3-(3,4-dihydroxyphenyl)-3-hydroxypropanoate (CAS: 23651-95-8) safe?
(2S,3S)-2-Ammonio-3-(3,4-dihydroxyphenyl)-3-hydroxypropanoate (CAS: 23651-95-8) ...
What are the physical and chemical properties of 7-bromo-3-methyl-3,4-dihydroquinazolin-4-one (CAS: 1293987-84-4)?
7-Bromo-3-methyl-3,4-dihydroquinazolin-4-one is a solid with a crystalline form....
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.













![(1R,5R)-3-{[(2-Methyl-2-propanyl)oxy]carbonyl}-3-azabicyclo[3.1.0]hexane-1-carboxylic acid structure (1R,5R)-3-{[(2-Methyl-2-propanyl)oxy]carbonyl}-3-azabicyclo[3.1.0]hexane-1-carboxylic acid structure](https://static.chemtradehub.com/structs/116/1165450-63-4-bfe1.webp)
